石鑫华视觉
Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://pcmv.cn/thread-490-1-1.html
视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://pcmv.cn/thread-26524-1-1.html
NI RF Signal Analyzers 15.0.2 Win32/64Eng NI仪器驱动程序NI-RFSA 15.0.2
NI-RFSA
NI-RFSA为使用NI PXI矢量信号分析仪和PXI矢量信号收发仪的RF输入的客户提供支持。
NI-RFSA是用于控制和配置NI矢量信号分析仪(VSA)的NI仪器驱动程序。NI-RFSA为大部分矢量信号分析仪应用提供了基于IVI的标准功能。NI-RFSA提供了一组操作和属性，使您可以创建自定义测量程序或需要I/Q数据的应用。NI-RFSA包含了交互式软面板和示例。
Win32/64
15.0.2
文件大小: 3621809926 字节 (3.37 GB)
修改日期: 2015-11-20 21:50
MD5: ad01fca3b1f45f23d7601b8bce2eb3bf（官方正确）
SHA1: feac2f8b466a03a614e98195d6303f5192611c84
SHA256: e5bad25a3389849ade3c7c15bc7fff6976b05d0cfc13c91dad3dafc3a5724380
CRC32: 393cb18c
百度网盘与NI官方下载地址：
NI RF Signal Analyzers 15.0.2 Win32/64Eng NI仪器驱动程序NI-RFSA 15.0.2
http://pcmv.cn/thread-26563-1-1.html?fromuid=9
(出处: 视觉论坛VISIONBBS|视觉之家VISIONHOME)
NI RF Signal Analyzers (NI-RFSA 15.0.2) Readme
New Features
Improvements in NI-RFSA fetch performance
Improvements to the self-calibration procedure for NI 5644R/5645R/5646R devices
Support for Windows 10 (32- and 64-bit)
Support for LabVIEW 2015 (32- and 64-bit)
Support for selectively omitting steps during software reset operations
NI-RFSA Soft Front Panel 15.0
Support for the NI 5668R vector signal analyzer
Support for additional FFT window types: Gaussian and Kaiser Bessel
Support for overlapping subspans to remove analyzer-generated spurs
Support for setting Reference Trigger delay for NI 5644R/5645R/5646R devices
NI-RFSA Soft Front Panel 14.1, which includes the following new features:
Support for SFP debug configuration
Support for reverting changes made in SFP Control (Local) mode
Support for the preceding new features listed for NI-RFSA
Support for the NI 5646R vector signal transceiver
Support for SFP session access
Support for downloading custom bitstreams to VST devices
NI-RFSA Soft Front Panel 2.9, which includes the following new features:
Additional RBW filter types for zero span, transmit power, and CCDF measurements
Support for the preceding new features listed for NI-RFSA
Supported Hardware
| Hardware Product | NI-RFSA | NI-RFSA Soft Front Panel |
| NI 5600 | √ | |
| NI 5601 | √ | |
| NI 5603 | √ | |
| NI 5605 | √ | |
| NI 5606 | √ | |
| NI 5661 | √ | √ |
| NI 5663/5663E | √ | √ |
| NI 5665 | √ | √ |
| NI 5667 | √ | √ |
| NI 5668R | √ | √ |
| NI 5644R | √ | √ |
| NI 5645R | √ | √ |
| NI 5646R | √ | √ |
System RequirementsSupported Operating Systems
Windows 10 (32-bit and 64-bit)
Windows 8.1 (32-bit and 64-bit)
Windows 7 (32-bit and 64-bit)
Windows Vista (32-bit and 64-bit)
Windows XP Service Pack 3 (32-bit)
Windows Server 2003 R2 (32-bit)
Windows Server 2008 R2 (64-bit)
Windows Server 2012 R2 (64-bit)
Supported Real-Time Operating Environments
LabVIEW Real-Time Module
LabWindows™/CVI™ Real-Time Module
Minimum System Requirements
Processor—Intel Pentium 4 or equivalent
RAM—
NI-RFSA: 512 MB*
NI-RFSA SFP: 1 GB*
Windows 10/8.1/7/Vista—1 GB*
Windows XP Service Pack 3 (SP3)—
Microsoft Internet Explorer 5.5 or later
Screen resolution—
NI-RFSA: 800 x 600
NI-RFSA SFP: 1,024 x 768
Color depth—256 colors
Windows 10/8.1/7/Vista/XP SP3, with all available critical updates and service packs
Recommended System
Processor—Intel i5 or equivalent
RAM—
Windows 10/8.1/7/Vista: 4 GB*
Windows XP SP3: 2 GB*
A screen resolution of 1,024 x 768
Windows 10/8.1/7/Vista/XP SP3, with all available critical updates and service packs
If you are running your application on an RT target, 128 MB of memory or more is recommended.
Application Development Environments (ADEs)
LabVIEW 2012 SP1 (32- and 64-bit), 2013 SP1 (32- and 64-bit), 2014 SP1 (32- and 64-bit), or 2015 (32- and 64-bit)
LabVIEW Real-Time Module 2012 SP1, 2013 SP1, 2014 SP1, or 2015
LabWindows/CVI 2010 or later
LabWindows/CVI Real-Time Module 2010 or later
Any C compiler capable of calling a 32-bit or 64-bit DLL
If you are running your application on an RT target, 128 MB of memory or more is required.
Installed Software, Documentation, and ExamplesInstalled Software
<NIDocDir> is an alias for the following National Instruments file folder location:
Windows 10/8.1/7/Vista: UsersPublicDocumentsNational Instruments
Windows XP: Documents and SettingsAll UsersShared DocumentsNational Instruments
<IVIROOTDIR32> is an alias for the following National Instruments file folder location:
Windows 10 (32-bit)/8.1 (32-bit)/7 (32-bit)/Vista (32-bit)/XP: Program FilesIVI
Windows 10 (64-bit)/8.1 (64-bit)/7 (64-bit)/Vista (64-bit): Program Files (x86)IVI
Windows 10 (32-bit)/8.1 (32-bit)/7 (32-bit)/Vista (32-bit)/XP: Program FilesIVI FoundationIVI
Windows 10 (64-bit)/8.1 (64-bit)/7 (64-bit)/Vista (64-bit): Program Files (x86)IVI FoundationIVI
| Note | $(IVIROOTDIR32) is configured as an environment variable on the target system. |
| If you upgraded an installation of IVI, your files may be located in the following location: |
<IVIROOTDIR64> is an alias for the following National Instruments file folder location:
Windows 10 (64-bit)/8.1 (64-bit)/7 (64-bit)/Vista (64-bit): Program FilesIVI FoundationIVI
| Note | $(IVIROOTDIR64) is configured as an environment variable on the target system. |
<NIDIR> is an alias for the following National Instruments file folder location:
Windows 10 (32-bit)/8.1 (32-bit)/7 (32-bit)/Vista (32-bit)/XP: Program FilesNational Instruments
Windows 10 (64-bit)/8.1 (64-bit)/7 (64-bit)/Vista (64-bit): Program Files (x86)National Instruments for 32-bit programs and Program FilesNational Instruments for 64-bit programs
<LabVIEW> is an alias for the following National Instruments file folder location:
Windows 10/8.1/7/Vista/XP: <NIDIR>LabVIEW <year>
File Locations
| Files | Installed Location on Windows 10/8.1/7/Vista/XP |
| NI-RFSA | <IVIROOTDIR32>Drivers iRFSA |
| NI-RFSA Function Panel | <IVIROOTDIR32>Drivers iRFSA iRFSA.fp |
| NI-RFSA Examples | <NIDocDir>NI-RFSAexamples |
| NI-RFSA Header file | <IVIROOTDIR32>Include |
| NI-RFSA Import Library files | <IVIROOTDIR32>lib |
| NI-RFSA DLL (32-bit) | <IVIROOTDIR32>Bin |
| TDM Excel Add-In for Microsoft Excel VI | <LabVIEW> i.libUtility dmsutil.lib |
Additional File Locations for Windows 10 (64-bit)/8.1 (64-bit)/7 (64-bit)/Vista (64-bit)
| Item | Installed Location on Windows 10 (64-bit)/8.1 (64-bit)/7 (64-bit)/Vista (64-bit) |
| NI-RFSA Function Panel | <IVIROOTDIR64>Drivers iRFSA iRFSA.fp |
| NI-RFSA Header files | <IVIROOTDIR64>Include |
| NI-RFSA Import Library files (64-bit) | <IVIROOTDIR64>Lib_x64 |
| NI-RFSA DLL (64-bit) | <IVIROOTDIR64>Bin |
Executable
Documentation
| Document | Format | Description |
| NI RF Vector Signal Analyzers Help | HTML/Windows Help | Contains primary help content for NI RF signal analyzer products. The help is an HTML version of a traditional user manual that includes the following information:
|
| Getting Started Guide for your device | Printed and PDF | Contains software and hardware installation, MAX configuration, signal connection, and troubleshooting information for your device. |
| Specifications for your device | Lists technical specifications for your device. | |
| Calibration Procedures for your device | Contains calibration instructions for your device. | |
| NI RF Signal Analyzers Readme | HTML (this document) | Contains information about supported hardware and operating systems, new features, fixed issues, and legal notices. |
| Introduction to NI-RFSA | HTML | Contains information about driver documentation, examples, connecting to your instrument, configuring instrument settings, and known issues. |
| NI-RFSA IVI Compliance Document | TXT | Contains information about IVI compliance. |
Accessing VIs and Functions
Finding Examples
Click the Browse tab to locate modulation examples by task at Hardware Input and Output»Modular Instruments»NI–RFSA or by directory structure at instr»niRFSA.
Click the Search tab to search all installed examples by keyword. For example, search for "RFSA" to locate all NI RF signal analyzer examples.
Product Security and Critical Updates
Driver Version Naming Changes
Uninstalling/Modifying NI–RFSA
Launch the Control Panel by selecting Start»Control Panel.
Double-click Add or Remove Programs.
Select National Instruments Software.
Click Change/Remove.
Select NI-RFSA 15.0.2 from the dialog box that appears.
Select Driver Runtime.
Click Remove to uninstall the product(s); click Modify to change the components that are installed.
Launch the Control Panel by selecting Start»Control Panel.
Double-click Programs and Features.
Select National Instruments Software.
Click the Uninstall/Change button.
Select NI-RFSA 15.0.2 from the dialog box that appears.
Click Remove to uninstall the product; click Modify to change the components that are installed.
Right-click on the Start screen.
Select All apps, and launch the Control Panel.
Select Programs» Programs and Features.
Select National Instruments Software.
Click the Uninstall button.
Select NI-RFSA 15.0.2 from the dialog box that appears.
Click Remove to uninstall the product; click Modify to change the components that are installed.
Click the Start button.
Select All apps, and launch the Control Panel.
Select Programs» Programs and Features.
Select National Instruments Software.
Click the Uninstall button.
Select NI-RFSA 15.0.2 from the dialog box that appears.
Click Remove to uninstall the product; click Modify to change the components that are installed.
NI-RFSA Runtime 15.0.2
NI-RFSA Soft Front Panel 15.0
NI-DAQmx Config 15.0
NI-SCOPE 15.0
NI IVI Compliance Package 15.0
NI Measurement & Automation Explorer (MAX) 15.0
NI-RFSG 15.0.2
NI-FGEN Runtime 15.0
NI IO Trace 15.0
NI System Configuration Runtime 15.0
NI-RIO 15.0
NI-RFSA/NI-RFSG Runtime 15.0.2 for NI VST
NI IF Digitizers Software-Designed Instrument Runtime 15.0
Known Issues
NI-RFSA Known Issues
NI-RFSA Soft Front Panel Known Issues
Bug FixesNI-RFSA Driver Bug Fixes
| ID | Fixed Issue |
| 509550 | Fixed an issue in which spurs were observed every 385 kHz for low reference level measurements. |
| 458168 | Fixed an issue in which read power spectrum returned incorrect data when called continuously. |
| 489736 | Fixed an issue in which the system displayed an ambiguous error when setting the IQ Power Edge Reference Trigger in a multispan acquisition. |
| 501291 | Fixed an issue in which the niRFSA_GetRelayOperationsCount function was not supported by NI 5606/5668R devices. |
| 505948 | Fixed an issue in which an unexpected data overflow error occurred with sample rates greater than 500 MS/s on NI 5606/5668R devices. |
| ID | Fixed Issue |
| 492490 | Fixed an issue in which the proper LabVIEW Run-Time Engine was not installed. |
| ID | Fixed Issue |
| 465141 | Fixed an issue in which fetch performance on VST devices degrades. |
| ID | Fixed Issue |
| 459297 | Fixed an issue in which the IQ IN Single Ended vertical range was incorrectly limited to 1 Vpk-pk. |
| ID | Fixed Issue |
| 401891 | Fixed an issue in which upgrading from a previous version of the driver left express VIs unusable. |
| 387728 | Fixed an issue in which the NI-P2P attributes test failed on some controller and OS combinations with the NI 5663E. |
| 375643 | Fixed an issue in which changing the Reference Trigger type from IQ power edge to None caused errors with the NI 5661. |
| 387196 | Fixed an issue in which a RIO device was not listed in the Device Resource name control for the niRFSA Initialize VI even though it was present on the system. |
| ID | Fixed Issue |
| 394079 | Fixed an issue in which the NI 5601 revision E modules do not behave properly with NI-RFSA 2.6. |
| 384602 | Fixed an issue in which an error occurs for certain configurations when you set the span, resolution bandwidth, and number of spectral lines properties or attributes. |
| 383183 | Fixed an issue in which calling Initialize and Close in parallel on the same device can cause the OS to deadlock. |
NI-RFSA Soft Front Panel Bug Fixes
| ID | Fixed Issue |
| 453860 | Fixed an issue in which the automatic VBW value in SFP Control (Local) mode was being incorrectly calculated. |
| 442518 | Fixed an issue in which clicking preset after closing a device session in SFP Control (Local) mode returned an error. |
| 486765 | Fixed an issue in which the NI-RFSA SFP Launcher example for NI TestStand did not automatically enable SFP session access. |
| 485420 | Fixed an issue in which certain SFP trigger coercion warnings were automatically cleared when entering SFP Control (Local) mode. |
| ID | Fixed Issue |
| 379030 | Fixed an issue in which the displayed offset was incorrect for offsets 13 to 15 in adjacent channel power and spectrum emission mask measurements. |
| 379671 | Fixed an issue in which the digital Start Trigger was not cleared when switching to I/Q acquisition mode. |
| 387636 | Fixed an issue in which setting the transmit power trigger level below 0 dBm incorrectly caused an error stating that the trigger level was too high. |
| 375392 | Fixed an issue in which the SFP incorrectly waited for a trigger to occur after the trigger was coerced to free run. |
| 369876 | Fixed an issue in which the values in the measurement display were not updated when recalling a file saved in an error state. |
| ID | Fixed Issue |
| 387363 | Fixed an issue in which the reference level could not be set below 0 dBm when the IQ Power Edge Trigger is enabled. |
| ID | Fixed Issue |
| 346134 | Fixed an issue in which the user could not set the delta marker in CCDF to a trace different from the reference marker. |
| 346699 | Fixed an issue in Zero Span with a marker enabled in which the keypad could not change the marker position if the user changed the acquisition time. |
| 347833 | Fixed an issue in spectral emission mask measurement in which the SFP sometimes disabled the I/Q Power Edge softkey when it should not. |
| 349655 | Fixed an issue in spectral emission mask measurement in which RBW and step frequency could be set lower than the minimum limit. |
| 356088 | Fixed an issue in which there was a mismatch between the analyzed range and visual indication on the user interface when the user set the Delay for an I/Q power edge trigger to a non zero value. |
| 345649 | Fixed an issue in which the SFP did not display a warning when the user recalled a configuration with the RF Coupling softkey set to DC. |
| 345782 | Fixed an issue in spectral emission mask measurement in which the SFP did not coerce the integration bandwidth when the user set the span of the reference channel to a value less than the integration BW. |
| 330388 | Fixed an issue in which a Windows command prompt window opened while closing the SFP. |
Automating the Installation of NI Products
For more information about silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.
For more information about silent installations of NI products in a suite, such as NI Developer Suite, refer to KB 4GGGDQH0, How Do I Automate the Installation of a Suited Installer?.
To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My National Instruments Installer?.
Using NI Software with Microsoft Windows 10
Using NI Software with Microsoft Windows 8.1
Using NI Launcher
| Note NI MAX does not appear as a desktop shortcut when installed on Microsoft Windows 8.x. You can launch NI MAX either from the Apps view or from within NI Launcher. |
Pinning Frequently Used Applications
| Current Application | Icon Location | Pin to Action |
| Windows 8.x Desktop | Desktop Taskbar | Right-click application and select Pin to Taskbar |
| Windows 8.x Desktop | Start screen | Right-click application and select Pin to Start |
| Windows 8.x Start screen | Desktop Taskbar | Right-click application and select Pin to taskbar from the menu bar on the bottom of the screen |
Finding All Programs
NI RF Signal Analyzers Drops Support for Microsoft Windows Vista, Windows XP, and Windows Server 2003 in 2016
| Product | Info Code |
| NI LabVIEW | lifecycle |
| NI LabWindows™/CVI™ | cvi_lifecycle |
| NI Measurement Studio | mstudiolifecycle |
| NI TestStand | tslcp |
| NI DIAdem | ddlcp |
| NI SignalExpress | selcp |
| NI VeriStand | nivslifecycle |
Legal Information
Notices are located in the <National Instruments>_Legal Information and <National Instruments> directories.
EULAs are located in the <National Instruments>SharedMDFLegallicense directory.
Review <National Instruments>_Legal Information.txt for information on including legal information in installers built with NI products.