Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活，以下链接可下载：
NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本
http://pcmv.cn/thread-490-1-1.html
视觉论坛的各种资源，除了视觉相关的模块有使用外，大部分的都不会使用，所以仅提供资源不能提供技术支持。资源的下载地址一般会同时提供NI官方地址和百度网盘的下载地址。某些工具包NI的地址失效或没有NI的下载地址，那视觉论坛也没有办法，只能尝试使用百度网盘地址下载；如果百度网盘的下载地址失效过期，可联系论坛客服更新。现在NI的下载服务器对我国IP地址不是很友好，有些时候速度很慢或大的资源下载很容易出错，这样会造成安装过程各种类型报错而无法安装。建议在下载完成后，对下载资源做校验和验证（NI一般会提供MD5或SHA256等），与官方或视觉论坛提供的校验和对比，一致就可以安装，如果不一致，则需要重新下载。视觉论坛早期下载的资源，那时候NI没有这么多限制，基本上都是正常下载的资源；后期下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘，所以百度网盘的资源基本上是正确的。校验和工具下载地址：
文件Hash计算器FHash,文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算
http://pcmv.cn/thread-26524-1-1.html
NI Semiconductor Test System Development Software 21.0.0 x64Win10 64bitEng NI-STS半导体测试系统开发软件21.0.0
半导体测试系统开发软件
半导体测试系统软件可帮助您开发、执行、调试和部署半导体测试系统软件(STS)应用。
半导体测试系统开发软件为STS提供了一套测试管理和代码模块开发工具。使用该软件，您可以定义引脚图、配置数字pattern、创建测试代码模块、自定义操作界面、优化并行测试效率（PTE）、以标准测试数据格式（STDF）报告数据，以及维护和校准测试系统。
Win10x64Eng
21.0.0
文件大小: 27815444480 字节 (25.91 GB)
修改日期: 2022-01-12 05:31
MD5: b216b56b067e4ad5dbd0aeb65b766dab（官方正确）
SHA1: b3d7e1fc38939b12e1db43e341778198157d7f29
SHA256: 5ad071a7cd2eceb5aa1f774e6a4c20a588d175bcaf696c66ebf7acf251131a05
CRC32: 8829dfaa
百度网盘与NI官方下载地址：
NI Semiconductor Test System Development Software 21.0.0 x64Win10 64bitEng NI-STS半导体测试系统开发软件21.0.0
http://pcmv.cn/thread-28091-1-1.html?fromuid=9
(出处: 视觉论坛VISIONBBS|视觉之家VISIONHOME)
STS Development Software 21.0 Readme
October 2021
This file contains important information about STS Development Software 21.0, including installation instructions and new features. STS Development Software is a collection of NI software for developing, executing, and debugging test programs on a non-STS computer.
Included Components
System Requirements
Supported Controllers and Operating Systems
Installation Considerations
Installation Instructions
Microsoft Visual Studio Support
Product Security and Critical Updates
New Features
What's Changed
Known Issues and Bug Fixes
Accessing the Documentation
Using NI Software with Microsoft Windows 10
Unsupported Windows Operating Systems
Legal Information
Included Components
STS Development Software 21.0 includes the following major components:
STS Development Software 21.0
TestStand 2020 f1
NI TestStand Semiconductor Module™ 2021 Q4 (TSM)
LabVIEW 2020 SP1 f1
LabVIEW 2020 SP1 f1 Run-Time Engine
LabVIEW 2021 Run-Time Engine
NI-Digital Pattern Driver 21.0.0
NI-DCPower 21.3.0
NI-SCOPE 20.7.0
NI-Sync 20.0.0
NI-RFPM 20.6.1
NI-RFmx 21.3.0
NI-RFSA 21.0.1
NI-RFSG 21.0.1
STS Auxiliary Mixed Signal Tools 20.0.0
STS Auxiliary RF Tools 21.0.0
TSM RF Steps 21.0.0
STS Handler and Prober Drivers 20.0.0
STS Maintenance Software 21.0.0
System Requirements
STS Development Software 21.0 has the following requirements:
2.3 GHz 8-Core Intel Xeon processor (or equivalent)
At least 100 GB of disk space
At least 12 GB RAM (NI recommends 24 GB RAM)
Supported Controllers and Operating Systems
STS Development Software 21.0 supports the following controllers:
STS Development Software 21.0 supports the following operating system:
Note STS Development Software 21.0 does not support certain versions of Windows 10. Refer to Editions of Windows 10 Supported by NI Software for more information.
Note Refer to Unsupported Windows Operating Systems for more information about support for Microsoft Windows OSes.
Installation Considerations
NI offers two installation paths for STS software—installing STS Software through the STS Version Selector and installing STS Development Software through NI Package Manager.
NI recommends installing STS Development Software through NI Package Manager if you are using a non-STS computer and do not need to switch among versions of STS software. Use STS Development Software 21.0 to develop, run, and debug STS test programs on a non-STS computer without access to NI instruments. When test program development is complete, transfer the test program to an STS from which you will deploy the test program into a production environment.
Note If you install STS Development Software 21.0 through NI Package Manager, you cannot downgrade your software version. NI does not recommend updating components of STS Development Software on the non-STS computer. The set of software you use to develop an STS test program must match the set of software on the STS from which you will deploy the test program.
If you need to switch among versions of STS software on a non-STS computer, install through the STS Version Selector. If you used a mechanism other than the STS Version Selector 19.0.0 or later to install any NI software on the STS or non-STS computer, you must reimage the computer before installing the latest version of the STS Version Selector. Refer to the STS Software 21.0 Readme for more information about installing STS Software through the STS Version Selector.
Installation Instructions
Download the STS Development Software installer from ni.com/downloads. NI software includes NI Package Manager to handle the installation. Refer to the NI Package Manager Manual for more information about installing, removing, and upgrading NI software using Package Manager.
Notes
If Windows Update is enabled, the installation process might hang if Windows Update interferes with the installation of Microsoft Visual C++ 2015 Run-Time. Visit ni.com/r/exjq43 for more information and steps to resolve this issue.
Use the serial number that is included with your software to activate STS Development Software. For more information on STS Development Software activation, refer to NI Software Activation.
You must restart the computer after you activate an STS software version.
Microsoft Visual Studio Support
If you are using NI .NET Class Libraries, .NET Framework 4.0 (minimum) is required. The NI .NET Class Libraries can be used with Visual C# or Visual Basic .NET in any Visual Studio version that can target .NET Framework 4.0 or .NET Framework 4.5.
For information about versions of the .NET Framework and the drivers each supports, refer to NI .NET Support.
Product Security and Critical Updates
Visit ni.com/security to view and subscribe to receive security notifications about NI products. For information about critical updates from NI, refer to Available Critical and Security Updates for NI Software.
Spectre and Meltdown
Refer to Meltdown and Spectre - Processor Speculative Execution Vulnerabilities (Windows) for more information about addressing Spectre and Meltdown issues.
New Features
STS Software 21.0 adds the following major new features:
New Hardware Support
PXIe-6569—Added support for the PXIe-6569 high-speed serial instrument.
PXIe-4137 (40 W) Source Measure Unit (SMU)—Added support for the high power (40W/10 A, pulsed) SMU version of the PXIe-4137.
PXIe-4190—Added support for the PXIe-4190 LCR. Support applies only to STS models with the CX configuration.
New and Improved Test Program Development and Debugging
Added support for extended continuity test frequency range up to 21.5 GHz on the PXIe-5831 + PXIe-5841 with STS-5531 as an STS RF subsystem.
RF Steps added the following new steps and examples:
The WLAN Test - 8 GHz example sequence demonstrates how to perform error vector magnitude (EVM) measurements with noise compensation on the PXIe-5831 + PXIe-5841 with STS-5531 as an STS RF subsystem.
The S-Parameter Test - 6 GHz example sequence demonstrates how to publish the S-parameter magnitude only or S-parameter magnitude and phase.
The NR test example sequence demonstrates how to use the TSM RF Steps to implement NR TXP measurements.
RF Steps adds the following new measurements:
NR ACP measurements—Perform customized definition of measurement offset and integration bandwidth.
WLAN OFDM ModAcc measurements—Support vector averaging type to reduce noise floor of a signal while retaining the signal spectrum.
WLAN measurements—Support the IEEE 802.11be standard.
The STS Auxiliary RF Tools provides the enhanced Golden Units Calibration Tool for calculating and updating the correlation offsets based on golden DUT, or known good unit, measurements. The enhanced features support multiple sites. You can calibrate golden units, retry failed golden units, check the calibration interval, and specify the minimum pass number of the golden units per site.
The STS Auxiliary RF Tools provides the enhanced STS RF Switch Control Panel plug-in for InstrumentStudio, which allows you to configure and connect the RF subsystem internal switches and paths to perform RF measurements. The enhanced features expand support on the PXIe-5831 + PXIe-5841 with STS-5531 as an STS RF subsystem, extend the measurement frequency up to 21.5 GHz, and support the PXIe-5841 with STS-5534 as an STS RF subsystem.
What's Changed
STS Development Software 21.0 includes updates to the following major components.
Note This is not an exhaustive list of updated products in STS Development Software.
Previous Version | Current Version |
| LabVIEW 2020 SP1 Run-Time Engine | LabVIEW 2021 Run-Time Engine |
| STS Maintenance Software 20.1.0 | STS Maintenance Software 21.0.0 |
| NI-Digital Pattern Driver 20.6.2 | NI-Digital Pattern Driver 21.0.0 |
| NI-DCPower 20.7.0 | NI-DCPower 21.3.0 |
| NI-RFmx 20.7.1 | NI-RFmx 21.3.0 |
| NI-RFSA 20.7.1 | NI-RFSA 21.0.1 |
| NI-RFSG 20.7.1 | NI-RFSG 21.0.1 |
STS Development Software 21.0 Auxiliary Components
STS Development Software 21.0 changes the following auxiliary components.
Note This is not an exhaustive list of changed auxiliary components in STS Development Software.
Previous Version | Renamed/Current Version |
| STS Auxiliary RF Tools 20.1.0 | STS Auxiliary RF Tools 21.0.0 |
| TSM RF Steps 20.1.0 | TSM RF Steps 21.0.0 |
Known Issues and Bug Fixes
You can access the known issues list and bug fixes list online. Refer to the private NI STS Technical Support Community, located at
https://forums.ni.com/t5/NI-STS-Technical-Support/gp-p/5300, for an up-to-date list of known issues and bug fixes in STS Development Software 21.0. You can work directly with NI Services personnel contracted on your project to request to be added to the NI STS Technical Support Community.
Accessing the Documentation
Select Start»National Instruments»STS Help to access the STS Help, which includes information about STS Development Software 21.0.
If you open help files directly from the <Program Files>National InstrumentsSTSDocumentationHelp directory, NI recommends that you open STSDocumentation.chm first because this file is a collection of help files and provides a complete table of contents and index.
STS manuals are available as PDFs in the <Program Files>National InstrumentsSTSDocumentationManuals directory. You must have Adobe Acrobat Reader installed to view the PDFs.
Using NI Software with Microsoft Windows 10
Microsoft Windows 10 is the latest version of the Windows operating system and features significant changes compared to previous versions. Windows 10 introduces several new capabilities and also combines features from both Windows 7 and Windows 8. For more information about NI support for Windows 10, refer to NI Product Compatibility for Microsoft Windows 10.
Unsupported Windows Operating Systems
STS Development Software no longer supports Windows Vista/XP/7/8.x, Windows Server 2003/2008/2012, or any 32-bit Windows operating system. Versions of this product that ship after May 1, 2021, may not install or execute correctly on these operating systems. For detailed information about NI operating system support, visit
https://www.ni.com/r/win32bitsupport.
Legal Information
Copyright
© 2017–2021 National Instruments Corporation. All rights reserved.
Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
NI respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
End-User License Agreements and Third-Party Legal Notices
You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:
Notices are located in the <National Instruments>_Legal Information and <National Instruments> directories.
EULAs are located in the <National Instruments>SharedMDFLegallicense directory.
Review <National Instruments>_Legal Information.txt for information on including legal information in installers built with NI products.
U.S. Government Restricted Rights
If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.
IVI Foundation Copyright Notice
Content from the IVI specifications reproduced with permission from the IVI Foundation.
The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
Trademarks
Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on NI trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.
Patents
For patents covering the NI products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the NI Patent Notice at ni.com/patents.
378143F-01
