Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://pcmv.cn/thread-490-1-1.html

视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://pcmv.cn/thread-26524-1-1.html

NI-Industrial Communications for CANopen 1.0.2 Driver Win32/64Eng NI-CANopen仪器通信驱动程序1.0.2

NI-Industrial Communications for CANopen
NI-Industrial Communications for CANopen可帮助您创建符合CiA DS-301标准的CANopen主应用程序。
NI-Industrial Communications for CANopen是一款驱动程序软件，为您使用CANopen接口设备、C系列CANopen接口模块和PXI CANopen接口模块提供所需的支持。它包含丰富的LabVIEW VI和属性库，因此您可以为兼容的硬件设备开发自定义的CANopen应用程序。

Win32/64Eng
1.0.2
文件大小: 435618952 字节 (415.44 MB)
修改日期: 2013-09-09 23:20
MD5: ff4510ee6ca602e797c4c0b42e67439c（官方正确）
SHA1: a6fa23d218e9636221411314aef6749c4f3ceae2
SHA256: c075a9cf855f713f5e9648d5969dedebb0c744d1e61acf7a12d792eefbe1a6b0
CRC32: eb5d5b87

百度网盘与NI官方下载地址：

NI-Industrial Communications for CANopen 1.0.2 Driver Win32/64Eng NI-CANopen仪器通信驱动程序1.0.2

http://pcmv.cn/thread-26377-1-1.html?fromuid=9

(出处: 视觉论坛VISIONBBS|视觉之家VISIONHOME)

NI-Industrial Communications for CANopen 1.0.2 Readme

Overview

New Features and ChangesCANopen 1.0.2

• Added support for LabVIEW 2012
  

CANopen 1.0.1

• Added support for LabVIEW 2011

• Added support for NI cRIO-9081 and NI cRIO-9082

• The CANopen VIs palette includes the following changed polymorphic VI instance:
  
  

• CANopen Interface Create—Includes an optional termination? input that enables or disables the onboard termination. The termination is a 120 Ω resistor.
  

CANopen 1.0

• First release to support NI CANopen hardware that includes PCI-8531, PXI-8531, and NI 9881

• Released a common high-level API across PCI, PXI, and CompactRIO targets running either a Windows or LabVIEW Real-Time OS
  

System RequirementsSupported Operating Systems

• Windows 7 (32-bit and 64-bit)

• Windows Vista (32-bit and 64-bit)

• Windows XP SP3 (32-bit)

• Windows Server 2003 R2 (32-bit)

• Windows Server 2008 R2 (64-bit)
  

Supported Hardware

• NI PCI-8531 (1-Port CANopen Interface for PCI)

• NI PXI-8531 (1-Port CANopen Interface for PXI)

• NI 9881 (1-Port C Series CANopen module for CompactRIO)
  
  

• Integrated CompactRIO Real-Time Controller: NI cRIO-9081 and NI cRIO-9082

• LabVIEW FPGA 2011 (or later) is required to build and deploy a bitstream with an NI 9881 module in the project.
  

• Real-Time Controller: NI cRIO-9012, NI cRIO-9014, NI cRIO-9022, NI cRIO-9023, NI cRIO-9024 and NI cRIO-9025

• CompactRIO Reconfigurable Chassis: NI cRIO-9111, NI cRIO-9112, NI cRIO-9113, NI cRIO-9114, cRIO-9116, and cRIO-9118

• The LabVIEW 2010 SP1 (or later) FPGA Module is required to build and deploy a bitstream with an NI 9881 module in the project.
  

• CompactRIO - NI-RIO 3.6.1 (or later) and LabVIEW 2010 SP1 (or later) required
  

• CompactRIO - NI-RIO 4.0 (or later) and LabVIEW 2011 (or later) required for the following targets:
  
  

Supported Development Environment

• LabVIEW 2010 SP1 (32-bit), LabVIEW 2011 (32-bit), and LabVIEW 2012 (32-bit)

• LabVIEW Real-Time (RT) 2010 SP1, LabVIEW RT 2011, and LabVIEW RT 2012
  

Installation Instructions

• Insert the NI-IndCom for CANopen software CD into your CD-ROM drive. The installer launches if your CD-ROM drive plays data CDs automatically. If the installer does not launch automatically, navigate to the CD using Windows Explorer and launch the autorun.exe file from your NI-IndCom for CANopen software CD.

• The installation wizard guides you through the necessary steps to install the NI-IndCom for CANopen software. You can go back and change values where appropriate by clicking the Back button. You can exit the setup where appropriate by clicking the Cancel button.

• When the installation is complete, click the Finish button.
  

Installing the Software on a Real-Time Target

• Expand Remote Systems in the configuration tree and expand your real-time target.

• Select the Software category. Click the Add/Remove Software icon on the toolbar to launch the LabVIEW Real-Time Software Wizard.

• If the real-time target is a CompactRIO controller, select Custom software installation.

• Select NI-Industrial Communications for CANopen x from the feature list and click the Next button.

• Follow the remaining installation instructions until installation is complete.
  

Accessing the Help

Finding Examples

Bug Fixes

Automating the Installation of NI Products

• For more information on silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.

• For more information on silent installations of suited NI products, such as NI Developer Suite, refer to KB 4GGGDQH0, Automating the Installation of a Suited Installer.

• To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My National Instruments Installer?.
  

Important Information

• Notices are located in the <National Instruments>_Legal Information and <National Instruments> directories.

• EULAs are located in the <National Instruments>SharedMDFLegallicense directory.

• Review <National Instruments>_Legal Information.txt for information on including legal information in installers built with NI products.
  

• 上篇：NI-Industrial Communications for CANopen 1.0.1 Driver Win32/64Eng NI-CANopen仪器通信驱动程序1.0.1
• 下篇：NI-Industrial Communications for CANopen 1.0.3 Driver Win32/64Eng NI-CANopen仪器通信驱动程序1.0.3
• 标签：NI-Industrial Communications for CANopen 1.0.2NI-CANopen仪器通信驱动程序1.0.2NI-CANopen驱动程序软件LabVIEW VICANopen应用程序