Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://pcmv.cn/thread-490-1-1.html

视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://pcmv.cn/thread-26524-1-1.html

NI-HSDIO 1.6 Driver Win32/62 Eng/Jpn NI高速数字输入输出仪器驱动程序1.6

NI-HSDIO
NI-HSDIO为使用NI PXI数字波形仪器或数字波形设备的客户提供支持。
NI-HSDIO是与数字波形硬件进行通信的NI仪器驱动程序，用于执行高速DIO  (HSDIO)任务。该驱动程序软件包含基于IVI准则的灵活API、完整的硬件支持文档，以及配置和测试实用程序。

Win32/64Eng/Jpn
1.6
文件大小: 1225089343 字节 (1.14 GB)
修改日期: 2010-07-26 13:55
MD5: 905e8194b1340016a32f0dc07d1cfeec（官方正确）
SHA1: 1a185e58c598bdcd202a1d317ae8167776211ca6
SHA256: 25a4a89a1f23e7232cf2423b2451826b5c3e9b4602fd9c85a871afc4126e2b79
CRC32: 6d5e06ea

百度网盘与NI官方下载地址：

NI-HSDIO 1.6 Driver Win32/62Eng NI高速数字输入输出仪器驱动程序1.6

http://pcmv.cn/thread-26354-1-1.html?fromuid=9

(出处: 视觉论坛VISIONBBS|视觉之家VISIONHOME)

NI-HSDIO Instrument Driver Readme

• New Features

• Supported Hardware

• System Requirements

• Installed File Names and Locations

• Documentation

• Uninstalling/Modifying NI-HSDIO

• Known Issues

• Bug Fixes
  

New Features

• Support for the NI 6544/6545/6547/6548 devices

• Added localized Japanese software and documentation

• Desktop PC support for the LabVIEW Real-Time Module

• Support for detecting NI Modular Instrument devices in LabWindowsTM/CVITM

• Support to continuously stream data while using the Pause trigger

• New source synchronous acquisition and generation examples for LabVIEW and LabWindows/CVI

• Added fetch optimizations for NI-HSDIO dynamic acquisitions

• Support for generation Stop trigger
  

• Support for LabVIEW 8.6

• Support was removed for LabVIEW 8.0
  

• Support for acquiring up to 2,147,483,647 records
  

• Bug fixes for the NI-HSDIO SignalExpress steps and niHSDIO Express VIs
  

• Support for streaming waveforms and Direct DMA

• NI-HSDIO Stimulus/Response express step and integration with NI LabVIEW SignalExpress 2.0

• Support for generating waveforms using the NI Digital Waveform Editor and NI LabVIEW SignalExpress 2.0

• Support for Windows Vista. For more information about Microsoft Windows Vista and NI products, refer to ni.com/vista.

• Support for LabVIEW 8.2.1
  

• Support for open collector generation on the NI 6541/6542/655x devices

• Support for per cycle, per pin tristate for NI 655x devices

• Addition of real-time hardware comparison of actual response data with expected response data.

• Support for using the waveform data type (WDT) in C application development environments

• Addition of an "if/else/end if" instruction in the supported scripting language

• Addition of the niHSDIO_WriteNamedWaveformFromFileHWS function and a Write from HWS File instance of the niHSDIO Write Named Waveform VI

• Changes to the possible values of input impedance for NI 655x devices; refer to device specifications for details

• Changes to recommended input voltage thresholds; refer to device specifications for details
  

Supported Hardware

• NI PXI/PCI-6541

• NI PXI/PCI-6542

• NI PXIe-6544

• NI PXIe-6545

• NI PXIe-6547

• NI PXIe-6548

• NI PXI/PCI-6551

• NI PXI/PCI-6552

• NI PXI/PCI-6561

• NI PXI/PCI-6562
  

System Requirements

• Processor: Pentium III/Celeron 600 MHz or equivalent

• RAM:
  

• Windows 2000/XP: 128 MB

• Windows Vista: 512 MB
  

• Microsoft Internet Explorer 5.5 or later

• A screen resolution of 800 x 600 with 256 colors

• Windows Vista/XP/2000, with all available critical updates and service packs
  

• Processor: Pentium 4 or equivalent

• RAM:
  

• Windows 2000/XP: 256 MB

• Windows Vista: 1 GB
  

• A screen resolution of 1024 x 768

• Windows Vista/XP/2000, with all available critical updates and service packs

• One of the following application development environments (ADEs):
  

• LabVIEW 7.1.1, 8.2.1, 8.5.1, or 8.6.1

• LabVIEW Real-Time Module 7.1.1, or later

• LabWindows™/CVI™ 7.1, or later

• LabWindows/CVI Real-Time Module

• Microsoft Visual C++ (MSVC) 6.0 or later
  

• If you are running your application on a RT target, 128 MB of memory or more is required.
  

Installed File Names and Locations

Documentation

• NI Digital Waveform Generator/Analyzer Getting Started Guide—Explains how to install, configure, and test a National Instruments digital waveform generator/analyzer.

• NI Digital Waveform Generator/Analyzer Help—Contains instructions for opening, configuring, initiating signal generation, and closing the session. Also, contains information about programming and fundamentals.

• Specifications document for your device—Contains specifications for the capabilities and valid operating conditions of your NI device.
  

Uninstalling/Modifying the Instrument Driver

• Launch the Control Panel by selecting Start»Control Panel.

• Double-click Add or Remove Programs.

• Select National Instruments Software.

• Click Change/Remove.

• Select NI-HSDIO 1.6 from the dialog box that appears.

• Click Remove to uninstall the product; click Modify to change the components that are installed.
  

• Launch the Control Panel by selecting Start»Control Panel.

• Double-click Programs and Features.

• Select National Instruments Software.

• Click the Uninstall/Change button.

• Select NI-HSDIO 1.6 from the dialog box that appears.

• Click Remove to uninstall the product; click Modify to change the components that are installed.
  

• NI IVI Compliance Package 3.3

• NI LabVIEW Run-Time Engine 7.1.1

• NI Measurement & Automation Explorer 4.5

• NI-DAQ 8.8

• NI-VISA 4.4.1
  

Known Issues

• For the NI PXIe-6544/6545/6547/6548, internal error -219001 may occur intermittently when synchronizing multiple acquisitions using NI-TClk at rates below 5 MHz. If this error occurs, consider oversampling by configuring your acquisition with a higher sample rate.

• In rare cases, the NI PXIe-6544/6545/6547/6548 may not utilize the full bandwidth of the PXI Express bus. These modules are x4 PXI Express devices, which are capable of using up to four 2.5 Gbps bus data lanes. Start-time negotiation between the PXI Express controller and the device may result in the device using only one or two data lanes. The result is reduced performance when reading or writing large amounts of waveform data. This situation is normally corrected the next time you restart your system. For more information, visit ni.com/kb and enter the code 4X4A86ZD.

• NI-HSDIO generates an error with an unknown status code when allocating streaming waveforms with sizes that are not 128-byte aligned.

• Multiple devices that are synchronized with NI-TClk and that use external clocks must all use the same clock rate.

• The acquisition Advance trigger is not NI-TClk synchronized.

• Attempting to generate or acquire data in SDR mode on channels 16 to 31 with a data width of 2 returns an error.

• If you click a topic link in the C/C++ Reference section of the NI Digital Waveform Generator/Analyzer Help, you cannot use the Back button in the HTML Help window toolbar to return to the original topic.

• Clicking hyperlinks inside the context help windows of the NI-HSDIO function panel produces errors. To access the relevant function reference documentation, open the NI Digital Waveform Generator/Analyzer Help and navigate to Programming» Reference» C/C++ Reference.

• NI-HSDIO devices might not be visible in Measurement & Automation Explorer (MAX) when deploying to a LabVIEW Real-Time target. For more information, search ni.com/kb using the code 4RCAMBD4.

• NI recommends that you disable Windows power management modes, such as sleep, standby, and hibernate when using this product. These modes terminate any NI-HSDIO operation in progress. Notice that in Windows Vista or on a laptop computer, the default power management settings are likely to enable sleep mode.

• When you run setup.exe to install the software from the CD, you are prompted to choose whether you want to always trust software from National Instruments. If you do not select this option, your installation may be interrupted by one or more Microsoft Windows security dialog boxes. However, if you run setup from the command line, you will not receive this prompt, and the installer will automatically install NI's Software Publisher Certificate to the your Windows Trusted Publisher Store. If you do not want to make this change to your Windows Trusted Publisher Store, do not choose this installation method.

• The NI-HSDIO Express steps that ship with NI-HSDIO 1.6 were designed for use with NI SignalExpress 1.1 or later. The NI-HSDIO Express steps are compatible with NI SignalExpress 1.0 with the exception that software Start triggers are not supported.

• For the NI 6544/6545/6547/6548, the Configure Sample Clock VI requires an input clock rate. If you are using NI-HSDIO 1.5.4 or earlier and did not provide this input, you will automatically have a constant (50 MHz) wired into the input.

• The error and self-test message strings now return localized values in LabVIEW. User applications that check the value of these strings (or trap errors by comparing the error cluster) may experience a change in behavior.

• Review the specifications document at Start»Programs»National Instruments»NI-HSDIO»Documentation to ensure that the clock and trigger signals you connect to the instrument meet the amplitude, jitter, and duty cycle requirements of your device.

  
  

Bug Fixes

• 上篇：NI-HSDIO 1.5.4 Driver Win32/62Eng NI高速数字输入输出仪器驱动程序1.5.4
• 下篇：NI-HSDIO 1.6.1 Driver Win32/62 Eng/Jpn NI高速数字输入输出仪器驱动程序1.6.1(DCD Aug09)
• 标签：NI-HSDIO 1.6NI高速数字输入输出仪器驱动程序1.6NI PXI数字波形仪器NI数字波形设备NI仪器驱动程序