Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://pcmv.cn/thread-490-1-1.html

视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://pcmv.cn/thread-26524-1-1.html

NI-HSDIO 1.5.1 Driver Win32/62Eng NI高速数字输入输出仪器驱动程序1.5.1

NI-HSDIO
NI-HSDIO为使用NI PXI数字波形仪器或数字波形设备的客户提供支持。
NI-HSDIO是与数字波形硬件进行通信的NI仪器驱动程序，用于执行高速DIO  (HSDIO)任务。该驱动程序软件包含基于IVI准则的灵活API、完整的硬件支持文档，以及配置和测试实用程序。

Win32/64Eng
1.5.1
文件大小: 809403986 字节 (771.91 MB)
修改日期: 2010-04-25 03:02
MD5: a0a0b66e873090dedbab11c80472f267（官方正确）
SHA1: b3da0b1cd6894b37d4ebfb4d21df432e2d1cae90
SHA256: 78f9c440bf0c7c1d440de99d9de852a98f9742fa980e109b204749f6b5bc511e
CRC32: 543bba7f

百度网盘与NI官方下载地址：

NI-HSDIO 1.5.1 Driver Win32/62Eng NI高速数字输入输出仪器驱动程序1.5.1

http://pcmv.cn/thread-26351-1-1.html?fromuid=9

(出处: 视觉论坛VISIONBBS|视觉之家VISIONHOME)

NI-HSDIO Instrument Driver Readme

• New Features

• Supported Hardware

• System Requirements

• Installed File Names and Locations

• Documentation

• Uninstalling/Modifying NI-HSDIO

• Known Issues
  

New Features

• Bug fixes for the NI-HSDIO SignalExpress steps and niHSDIO Express VIs
  

• Support for streaming waveforms and Direct DMA

• NI-HSDIO Stimulus/Response express step and integration with NI LabVIEW SignalExpress 2.0

• Support for generating waveforms using the NI Digital Waveform Editor and NI LabVIEW SignalExpress 2.0

• Support for Windows Vista. For more information about Microsoft Windows Vista and NI products, refer to ni.com/vista.

• Support for LabVIEW 8.2.1
  

• Support for open collector generation on the NI 654X/655X devices

• Support for per cycle, per pin tristate for NI 655X devices

• Addition of real-time hardware comparison of actual response data with expected resposne data. For more information on this feature, visit ni.com/info and enter the info code nsi5410

• Support for using the waveform data type (WDT) in C application development environments

• Addition of an "if/else/end if" instruction in the supported scripting language

• Addition of the niHSDIO_WriteNamedWaveformFromFileHWS function and a Write from HWS File instance of the niHSDIO Write Named Waveform VI

• Changes to the possible values of input impedance for NI 655X devices; refer to device specifications for details

• Changes to recommended input voltage thresholds; refer to device specifications for details
  

Supported Hardware

• NI PXI/PCI-6541

• NI PXI/PCI-6542

• NI PXI/PCI-6551

• NI PXI/PCI-6552

• NI PXI/PCI-6561

• NI PXI/PCI-6562
  

System Requirements

• Processor: Pentium 200 MHz or equivalent

• RAM: 64 MB

• Microsoft Internet Explorer 5.5 or later

• A screen resolution of 800×600 with 256 colors (required for the NI Script Editor)
  

• Processor: Pentium III/Celeron 600 MHz or equivalent

• RAM: 256 MB

• Microsoft Internet Explorer 5.5 or later

• One of the following operating systems:
  

• Windows Vista

• Windows XP

• Windows 2000
  

• One of the following application development environments (ADEs):
  

• LabVIEW  7.1, 8.0, 8.2, or 8.2.1

• LabVIEW Real-Time Module 7.1.1 or later

• LabWindows™/CVI™ 7.1, 8.0, or 8.2

• LabWindows/CVI Real-Time Module

• Microsoft Visual C++ (MSVC) 6.0 or later
  

• If you are running your application on an RT target, 64 MB of memory or more is recommended.
  

Installed File Names and Locations

Product Documentation

• NI Digital Waveform Generator/Analyzer Getting Started Guide–Explains how to install, configure, and test a National Instruments digital waveform generator/analyzer.

• NI Digital Waveform Generator/Analyzer Help–Contains instructions for opening, configuring, initiating signal generation, and closing the session. Also, contains information about programming and fundamentals.

• Specifications document for your device–Contains specifications for the capabilities and valid operating conditions of your NI device.
  

Uninstalling/Modifying the Instrument Driver

• Launch the Control Panel by selecting Start»Control Panel.

• Double-click Add or Remove Programs.

• Select National Instruments Software.

• Click Change/Remove.

• Select NI-HSDIO 1.5.1 from the dialog box that appears.

• Click Remove to uninstall the product; click Modify to change the components that are installed.
  

• Launch the Control Panel by selecting Start»Control Panel.

• Double-click Programs and Features.

• Select National Instruments Software.

• Click the Uninstall/Change button.

• Select NI-HSDIO 1.5.1 from the dialog box that appears.

• Click Remove to uninstall the product; click Modify to change the components that are installed.
  

• NI IVI Compliance Package 3.0

• NI LabVIEW Run-Time Engine 7.0

• NI Measurement & Automation Explorer 4.2

• NI-DAQ 8.5

• NI-VISA 4.1
  

Known Issues

• NI recommends that you disable Windows power management modes, such as sleep, standby, and hibernate when using this product. These modes terminate any operation in progress. Notice that in Windows Vista or on a laptop computer, the default power management settings are likely to enable sleep mode.

• When you run setup.exe to install the software from the CD, you are prompted to choose whether you want to always trust software from National Instruments. If you do not select this option, your installation may be interrupted by one or more Microsoft Windows security dialog boxes. However, if you run setup from the command line, you will not receive this prompt, and the installer will automatically install NI's Software Publisher Certificate to the your Windows Trusted Publisher Store. If you do not want to make this change to your Windows Trusted Publisher Store, do not choose this installation method.

• If for some reason you need to downgrade from NI-HSDIO 1.5 to a previous version of NI-HSDIO, the MAX data store may become corrupted. Refer to Knowledgebase 3L9AK06E for information about how to resolve this issue. To access this Knowledgebase entry, visit ni.com/zone, and type 3L9AK06E in the Search KnowledgeBase Documents textbox.

• When using NI-HSDIO 1.4 with the LabVIEW Real-Time Module, the text of some error descriptions are not returned by NI-HSDIO. Error codes that are returned are returned correctly. Refer to Knowledgebase 3OOFLT0Q for information about how to resolve this issue.

• NI-HSDIO Express steps in NI Signal Express 1.0—The NI-HSDIO Express steps that ship with NI-HSDIO 1.3.1 were designed for use with NI SignalExpress 1.1 or later. The NI-HSDIO Express steps are compatible with NI SignalExpress 1.0 with the exception that software start triggers are not supported.

• Review the specifications document at Start»Programs»National Instruments»NI-HSDIO»Documentation to ensure that the clock and trigger signals you connect to the instrument meet the amplitude, jitter, and duty cycle requirements of your device.

  
  

• 上篇：NI-HSDIO 1.4.3 Driver Win32Eng NI高速数字输入输出仪器驱动程序1.4.3(DCD Aug06)
• 下篇：NI-HSDIO 1.5.2 Driver Win32/62Eng NI高速数字输入输出仪器驱动程序1.5.2(DCD Aug07)
• 标签：NI-HSDIO 1.5.1NI高速数字输入输出仪器驱动程序1.5.1NI PXI数字波形仪器NI数字波形设备NI仪器驱动程序