Windows系统下(Linux和MAC系统下请自行了解清楚)NI的各种软件、模块、工具包、驱动程序,使用NI许可证管理器来激活的,绝大部分的都可以使用NI Lincense Activator来激活:NI序列号Serial Number生成激活工具NI License Activator,LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://pcmv.cn/thread-490-1-1.html
视觉论坛的各种NI资源,除了视觉相关的模块有使用外,大部分的都不会使用,仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址,只能使用百度网盘地址;如果百度网盘地址失效过期,可联系论坛客服更新。NI的服务器在美国,有时候速度很慢或下载容易出错,这样会造成安装时各种错误而无法安装。建议在下载完成后,对下载资源做校验和(NI一般会提供MD5或SHA256等)验证,与官方或视觉论坛提供的校验和对比,一致就可以安装;如不一致,则需要重新下载。视觉论坛早期下载上传的资源,基本上都是正常下载的资源;2019后下载的资源,都与NI的正确校验和对比过,保证是正确的资源才上传到百度网盘。校验和工具下载地址:文件Hash计算器FHash,文件校验和验证下载文件正确性验证,MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://pcmv.cn/thread-26524-1-1.html
NI-Industrial Communications for DeviceNet 2.3 Driver Win32Eng NI-DNet工业通信软件驱动程序2.3下载
NI DeviceNet工业通信软件
NI-Industrial Communications for DeviceNet可帮助您配置和控制DeviceNet网络上DeviceNet设备。
NI-Industrial Communications for DeviceNet是一种驱动程序软件,为您使用DeviceNet接口设备、C系列DeviceNet接口模块和PXI DeviceNet接口模块提供所需的支持。它包含丰富的LabVIEW VI和属性库,因此您可以为兼容的硬件设备创建自定义的DeviceNet应用程序。
Win32Eng
2.3
文件大小: 446780192 字节 (426.08 MB)
修改日期: 2013-09-16 23:11
MD5: 63f105f92a67f32d53aae8b032286c19(官方正确)
SHA1: 588f240fd2c21e2a8edf9a64da9d03bdbc27bab1
SHA256: 22c6ca8c056aad13b82b0fb37009fca972331d0eca446bb24cafe0b28301363d
CRC32: 005f99eb
百度网盘与NI官方下载地址:
NI-Industrial Communications for DeviceNet 2.3 Driver Win32Eng NI-DNet工业通信软件驱动程序2.3下载
http://pcmv.cn/thread-26201-1-1.html?fromuid=9
(出处: 视觉论坛VISIONBBS|视觉之家VISIONHOME)
NI-Industrial Communications for DeviceNet 2.3 Readme
Note The NI-IndCom for DeviceNet 2.3 software requires the NI 9882 module with the upgraded firmware. When you upgrade your software to the 2.3 version, check the software version of the CD that shipped with your NI 9882 module.
If the version is not 2.3 or you are not sure of the version number, National Instruments recommends that you upgrade the firmware. Otherwise, when you use NI-IndCom for DeviceNet 2.3, firmware images corrupt or get mismatched.
Make sure you have appropriate hardware and software installed and complete one of the following tasks to upgrade the firmware.
If you are using cRIO-9111, cRIO-9112, cRIO-9113, cRIO-9114, cRIO-9116, cRIO-9118, cRIO-9081, or cRIO-9082 with LabVIEW 2012 or later, double-click ModuleFirmwareUpgrade.exe in the National InstrumentsNI-IndCom for DeviceNetUtilities directory and follow the instructions in this utility to upgrade the firmware.
If you are using other chassis with LabVIEW 2013 or later, double-click Firmware_Upgrade_Instructions.html in the National InstrumentsNI-IndCom for DeviceNet directory and follow the instructions to use a LabVIEW example project to upgrade the firmware.
New Features and ChangesDeviceNet 2.3
Added FPGA VIs to operate the NI 9882 modules on the NI-RIO targets
Added support for cRIO-9068
Added support for LabVIEW 2013 (32-bit) and LabVIEW 2013 Real-Time Module
DeviceNet 2.2
Added slave support for NI 9882, PCI-8532, and PXI-8532
Added VIs for reading and writing the raw CAN frames
Added an example VI for monitoring and analyzing DeviceNet packets
Added support for LabVIEW 2012 (32-bit) and LabVIEW 2012 Real-Time Module
DeviceNet 2.1
Added support for NI 9882 1-Port DeviceNet Module for NI CompactRIO
Added NI-DNET 1.x compatible LabVIEW VIs
DeviceNet 2.0.2
Added support for LabVIEW 2011 (32-bit) and LabVIEW 2011 Real-Time Module
DeviceNet 2.0.1
Added support for LabVIEW 2010 (32-bit) and LabVIEW 2010 Real-Time Module
DeviceNet 2.0
Supported NI DeviceNet hardware: PCI-8532 and PXI-8532
Supported LabVIEW 2009 (32-bit) and LabVIEW 2009 Real-Time Module
System RequirementsSupported Operating Systems
Windows 8 (32-bit and 64-bit)
Windows 7 (32-bit and 64-bit)
Windows Vista (32-bit and 64-bit)
Windows XP SP3 (32-bit)
Windows Server 2003 R2 (32-bit)
Windows Server 2008 R2 (64-bit)
Supported Hardware and Software
Installation Instructions
Insert the NI-IndCom for DeviceNet software CD into your CD-ROM drive. The installer launches if your CD-ROM drive plays data CDs automatically. If the installer does not launch automatically, navigate to the CD using Windows Explorer and launch the autorun.exe file from your NI-IndCom for DeviceNet software CD.
The installation wizard guides you through the necessary steps to install the NI-IndCom for DeviceNet software. You can go back and change values where appropriate by clicking the Back button. You can exit the setup where appropriate by clicking the Cancel button.
When the installation is complete, click the Finish button.
Installing the Software on a Real-Time Target
Expand Remote Systems in the configuration tree and expand your real-time target.
Select the Software category. Click the Add/Remove Software icon on the toolbar to launch the LabVIEW Real-Time Software Wizard.
If the real-time target is a CompactRIO controller, select the Custom software installation option.
Select the NI-IndCom for DeviceNet item in the feature list and click the Next button.
Follow the remaining installation instructions until installation is complete.
NI-IndCom for DeviceNet Updates and Notifications
Accessing the Help
Finding Examples
Bug Fixes
ID | Fixed Issue |
198387 | Explicit messaging function block help does not explain how to write attributes |
185016 | PCI/PXI 8532 boards manual lacks hardware specifications section |
ID | Fixed Issue |
288931 | DeviceNet deployment executable fails to execute on a machine without LabVIEW |
Compatibility with NI-DNET 1.x
Automating the Installation of NI Products
For more information on silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.
For more information on silent installations of suited NI products, such as NI Developer Suite, refer to KB 4GGGDQH0, Automating the Installation of a Suited Installer.
To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My National Instruments Installer?.
How to Use NI Software with Microsoft Windows 8
Using NI Launcher
Note MAX does not appear as a desktop shortcut when installed on Microsoft Windows 8. You can launch MAX either from the Start screen or from within NI Launcher. |
Pinning Frequently Used Applications
Current Application | Icon Location | Pin to Action |
Windows 8 Desktop | Desktop Taskbar | Right-click application and select Pin to Taskbar |
Windows 8 Desktop | Start screen | Right-click application and select Pin to Start |
Windows 8 Start screen | Desktop Taskbar | Right-click application and select Pin to taskbar from the menu bar on the bottom of the screen |
Finding All Programs
NI-IndCom for DeviceNet Drops Support for Microsoft Windows Vista, Windows XP, and Windows Server 2003 in 2016
Product | Info Code |
NI LabVIEW | lifecycle |
NI LabWindows™/CVI™ | cvi_lifecycle |
NI Measurement Studio | mstudiolifecycle |
NI TestStand | tslcp |
NI DIAdem | ddlcp |
NI SignalExpress | selcp |
NI VeriStand | nivslifecycle |
Important Information
Notices are located in the <National Instruments>_Legal Information and <National Instruments> directories.
EULAs are located in the <National Instruments>SharedMDFLegallicense directory.
Review <National Instruments>_Legal Information.txt for information on including legal information in installers built with NI products.