石鑫华视觉 手机微信QQ:13450001061 / 18038383457

下载中心

NI FlexRIO Adapter Module Support 1.6 Driver Win32Eng NI FlexRIO适配器模块支持驱动软件1.6下载

文章来源:石鑫华视觉网时间:2022-05-20 14:46:12 点击:176

Windows系统下(Linux和MAC系统下请自行了解清楚)NI的各种软件、模块、工具包、驱动程序,使用NI许可证管理器来激活的,绝大部分的都可以使用NI Lincense Activator来激活:NI序列号Serial Number生成激活工具NI License Activator,LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://pcmv.cn/thread-490-1-1.html

视觉论坛的各种NI资源,除了视觉相关的模块有使用外,大部分的都不会使用,仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址,只能使用百度网盘地址;如果百度网盘地址失效过期,可联系论坛客服更新。NI的服务器在美国,有时候速度很慢或下载容易出错,这样会造成安装时各种错误而无法安装。建议在下载完成后,对下载资源做校验和(NI一般会提供MD5或SHA256等)验证,与官方或视觉论坛提供的校验和对比,一致就可以安装;如不一致,则需要重新下载。视觉论坛早期下载上传的资源,基本上都是正常下载的资源;2019后下载的资源,都与NI的正确校验和对比过,保证是正确的资源才上传到百度网盘。校验和工具下载地址:文件Hash计算器FHash,文件校验和验证下载文件正确性验证,MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://pcmv.cn/thread-26524-1-1.html

NI FlexRIO Adapter Module Support 1.6 Driver Win32Eng NI FlexRIO适配器模块支持驱动软件1.6下载

NI FlexRIO适配器模块支持
NI FlexRIO Adapter Module Support为FlexRIO适配器模块提供LabVIEW支持。
NI FlexRIO Adapter Module Support是一款驱动软件,可支持并访问FlexRIO适配器模块的I/O,包括数字化仪、收发仪、信号发生器、射频和DIO适配器模块。该软件还提供示例来帮助用户开始使用各种FlexRIO适配器模块。必须安装NI-FlexRIO才可使用该软件。

Win32Eng
1.6
文件大小: 53774734 字节 (51.28 MB)
修改日期: 2010-04-29 20:29
MD5: 6c01a71f95aa09f8f73dbcd134472173(官方正确)
SHA1: 36db14858001ce01e0809b5841e491378cdc1ad8
SHA256: 2fd4d985a348c952bfaabd416e90b0be3a1b5ebb5b326cfbf6e861c2116047b5
CRC32: c29a6993

百度网盘和NI官方下载地址:

NI FlexRIO Adapter Module Support 1.6 Driver Win32Eng NI FlexRIO适配器模块支持驱动软件1.6下载

http://pcmv.cn/thread-26145-1-1.html?fromuid=9

(出处: 视觉论坛VISIONBBS|视觉之家VISIONHOME)



NI FlexRIO Adapter Module Support 1.6 Readme

December 2009
ni.com/support
This file contains important information about the NI FlexRIO Adapter Module Support 1.6, including installation instructions and additional support information.

  • Installing NI FlexRIO Adapter Module Support 1.6

  • Supported Platforms

  • Additional Support


Installing NI FlexRIO Adapter Module Support 1.6 with LabVIEW 8.6 Examples

Complete the following steps to install NI FlexRIO Adapter Module Support 1.6
  • Install LabVIEW 8.6.1

  • (Optional) Install LabVIEW Real-Time 8.6.1

  • Install LabVIEW FPGA 8.6.1

  • Install NI-RIO 3.3

  • Install NI FlexRIO Adapter Module Support 1.6 using the installation CD.

Back to Top

Installing NI FlexRIO Adapter Module Support 1.6 with LabVIEW 2009 Examples

Complete the following steps to install NI FlexRIO Adapter Module Support 1.6
  • Install LabVIEW 2009

  • (Optional) Install LabVIEW Real-Time 2009

  • Install LabVIEW FPGA 2009

  • Install NI-RIO 3.3

  • Install NI FlexRIO Adapter Module Support 1.6 using the installation CD.

Back to Top

Supported Platforms

NI FlexRIO Adapter Module Support 1.6 supports the following platforms:
  • Windows 7 Professional (32-bit and 64-bit versions)

  • Windows Vista Business (32-bit and 64-bit versions)

  • Windows XP Professional

  • Windows 2000 Professional (Service Pack 3 or higher)

Back to Top

Additional Support

For additional FlexRIO product support and information, please refer to ni.com/flexrio.
Back to Top

Copyright
© 2006–2009 National Instruments Corporation. All rights reserved.
Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
Trademarks
National Instruments, NI, ni.com, and LabVIEW are trademarks of National Instruments Corporation. Refer to the Terms of Use section on ni.com/legal for more information about National Instruments trademarks.
Patents
For patents covering the National Instruments products, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your CD, or ni.com/patents.
Back to Top


首页
84162741QQ
联系