Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活，以下链接可下载：
NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本
http://pcmv.cn/thread-490-1-1.html
视觉论坛的各种资源，除了视觉相关的模块有使用外，大部分的都不会使用，所以仅提供资源不能提供技术支持。资源的下载地址一般会同时提供NI官方地址和百度网盘的下载地址。某些工具包NI的地址失效或没有NI的下载地址，那视觉论坛也没有办法，只能尝试使用百度网盘地址下载；如果百度网盘的下载地址失效过期，可联系论坛客服更新。现在NI的下载服务器对我国IP地址不是很友好，有些时候速度很慢或大的资源下载很容易出错，这样会造成安装过程各种类型报错而无法安装。建议在下载完成后，对下载资源做校验和验证（NI一般会提供MD5或SHA256等），与官方或视觉论坛提供的校验和对比，一致就可以安装，如果不一致，则需要重新下载。视觉论坛早期下载的资源，那时候NI没有这么多限制，基本上都是正常下载的资源；后期下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘，所以百度网盘的资源基本上是正确的。校验和工具下载地址：
文件Hash计算器FHash,文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算
http://pcmv.cn/thread-26524-1-1.html
NI IVI Compliance Package 18.0 Win32/64Eng NI IVI合规软件包18.0下载
IVI合规软件包
IVI Compliance Package包含IVI类驱动程序和支持库，用于开发和利用基于IVI互换性的应用程序。
IVI Compliance Package包含了IVI类驱动程序、仿真驱动程序和基于IVI的NI编程环境的应用案例。IVI Compliance Package基于IVI Foundation制定的最新仪器编程规范，并遵守该规范。IVI Compliance Package中的IVI类驱动程序可与专门IVI专用的驱动程序配合使用。
Win32/64Eng
18.0
文件大小: 248893768 字节 (237.36 MB)
修改日期: 2019-06-25 02:45
MD5: 91cd10488d128aa801fd3e96ff9b7238
SHA1: 4aa4bec1a0796290a2b11ea8ba96bcf1c0f08c25
SHA256: fcc1b3c39e3d5be8799e004d6d2be47e4e48dc8fa7f83dbca2b25cb8cd64770f
CRC32: 765d63f0
百度网盘和NI官方下载地址：
NI IVI Compliance Package 18.0 Win32/64Eng NI IVI合规软件包18.0下载
http://pcmv.cn/thread-26043-1-1.html?fromuid=9
(出处: 视觉论坛VISIONBBS|视觉之家VISIONHOME)
NI IVI Compliance Package 18.0 Readme
May 2018
This file contains important information about the IVI Compliance Package (ICP), including installation instructions, new features, a partial list of bugs fixed for ICP 18.0, and known issues.
About IVI Compliance Package
Installed Components
Supported Operating Systems
NI Application Software Support
Installation Instructions
Uninstall Considerations
LabWindows/CVI Version Support
Product Security and Critical Updates
New Features and Bug Fixes
Known Issues
Known Incompatibilities
LabVIEW NXG Support and Considerations
Automating the Installation of NI Products
Using NI Software with Microsoft Windows 10
Using NI Software with Microsoft Windows 8.1
LabVIEW NXG Support and Considerations
Legal Information
About IVI Compliance Package
The IVI Compliance Package is a software package that contains the IVI class drivers and support libraries necessary to develop and use applications that leverage IVI instrument interchangeability. The IVI Compliance Package also is based on and is compliant with the latest version of the instrument programming specifications defined by the IVI Foundation. You can use the IVI class drivers in the IVI Compliance Package with IVI specific drivers.
IVI class drivers implement functions and attributes for controlling an instrument within a specified class, as defined by the IVI Foundation. The IVI Compliance Package provides IVI class drivers for the following specifications:
IviACPwr
IviCounter
IviDCPwr
IviDigitizer
IviDmm
IviDownconverter
IviFgen
IviPwrMeter
IviRFSigGen
IviScope
IviSpecAn
IviSwtch
IviUpconverter
IVI specific drivers are drivers for the most popular instruments from all of the currently defined IVI Foundation classes and from the largest instrument manufacturers including National Instruments, Keysight Technologies, and Tektronix. You can create IVI specific drivers yourself, or download them from ni.com/idnet.
Installed Components
Depending on the software support you select when you install ICP 18.0, the installation includes one or more of the following components:
IVI class drivers
IVI class simulation drivers
IVI class driver LabWindows/CVI support
IVI class driver wrappers for LabVIEW 2015, 2016, 2017, and 2018
IVI class driver examples for LabWindows/CVI, LabVIEW, and Measurement Studio
IVI-COM adapters (32-bit only)
IVI Shared Components 2.6
IVI configuration plug-in for Measurement & Automation Explorer (MAX) 4.7 and later
Documentation
Supported Operating Systems
ICP has the following requirements:
1 NI software installs VC2015 Runtime and .NET 4.6.2. Windows 8.1 and Windows Server 2012 R2 require Microsoft updates to support these items. Refer to Microsoft KB2919442 and KB2919355 for more information about how to install these updates.
2 NI software is signed with a SHA-256 certificate. Windows 7 SP1, Windows Embedded Standard 7 SP1, and Windows Server 2008 R2 SP1 require Microsoft updates to support SHA-256. Refer to Microsoft KB3033929 for more information about how to install this security update.
Note In 2016 ICP dropped support for Windows Vista, Windows XP, Windows Server 2003, and installations of Windows 7 without any service packs. ICP 18.0 will not install or run on an unsupported OS. You cannot deploy or distribute applications that use ICP 18.0 to an unsupported OS. Additionally, after installing ICP 18.0, you cannot use any installers built on this computer with any version of LabVIEW, LabWindows™/CVI™, NI TestStand™, or Measurement Studio on an unsupported OS.
For more information about the changes to our OS support for 2016, refer to KB 79UC78LS, Why Does My NI ADE Installer Fail on Windows XP/Vista and Windows Server 2003?.
Note Support for Windows 32-bit operating systems may require disabling physical address extension (PAE). To learn how this might affect your system and what actions you might need to take, visit ni.com/info and enter the Info Code PAESupport.
NI Application Software Support
The following table lists the NI application software versions, including service packs, supported by ICP. If you are not using NI application software, refer to Microsoft Visual Studio Support.
| NI Application Software | Versions Supported by IVI Compliance Package |
| NI LabVIEW | 2015, 2016, 2017, 2018 |
| NI LabWindows™/CVI™ | 7.1, 8.0, 8.5, 9.0, 2009, 2010, 2012, 2013, 2015, 2017 |
Installation InstructionsInstalling ICP for LabVIEW and LabWindows/CVI
ICP is included in the National Instruments Device Drivers media. A stand-alone web distribution version is available from ni.com/downloads.
Note National Instruments recommends that you close all other applications before you install ICP 18.0.
To install the stand-alone, web-only version of ICP, complete the following steps:
Download the ICP 18.0 self-extracting archive file from http://www.ni.com/downloads/drivers/ by searching for IVI compliance Package.
Double-click the self-extracting archive file to launch the installer.
Click OK to begin installation.
Follow the directions that appear on the screen.
Installing ICP for LabVIEW NXG
NI automates LabVIEW NXG installation using NI Package Manager. Visit ni.com/info and enter the Info Code NIPMDownload to download NI Package Manager. Refer to the NI Package Manager Manual for more information about installing, removing, and upgrading NI software using NI Package Manager.
Complete the following steps to install ICP for LabVIEW NXG.
Visit ni.com/info and enter the info code NXGDownload to access the LabVIEW NXG download page.
Click Download LabVIEW NXG 1.0.
NI Package Manager installs, then automatically opens a download window.
Select LabVIEW NXG Suite and click the green Install button.
Select LabVIEW NXG 1.0 and ICP 18.0.
Complete the installer instructions to download LabVIEW NXG 1.0 and ICP 18.0.
Installation Notes
ICP 18.0 stand-alone, web-only distribution does not install NI I/O Trace (formerly known as NI-Spy) or MAX. You can install NI I/O Trace and MAX using several other National Instruments products, including the NI Device Drivers media.
The installation directory for LabWindows/CVI IVI Class examples and IVI Class Simulation drivers has been changed. The new installation directory is <All Users>DocumentsNational InstrumentsCVISamplesIVI directory.
ICP 3.2 and later versions include IVI-COM adapters, which enable users to use IVI-C and IVI-COM specific drivers interchangeably in the same 32-bit application. For more information on IVI-COM adapters, refer to the IVI-C Class Driver Support for IVI-COM Specific Drivers document.
ICP 4.5 and later versions install alternate FP and SUB files for the IviFgen class driver in order to support setting 64-bit integer attributes. For more information, refer to KnowledgeBase 5WOA752F: Issue Setting IviFgen Attribute ID Using Get/Set/CheckAttributeViInt64 Functions.
If you use ICP 4.5 or later to build a driver, the driver will work on a system that has ICP 2.5 or later.
If Windows Update is enabled, the installation process might hang if Windows Update interferes with the installation of Microsoft Visual C++ 2015 Run-Time. Visit ni.com/info and enter the Info Code exjq43 for more information and steps to resolve this issue.
Uninstall Considerations
Complete the following steps to uninstall ICP 18.0:
From the Control Panel, select Uninstall a Program.
Select National Instruments Software.
Select NI IVI Compliance Package 18.0.
Click Remove.
Note: After you uninstall ICP 18.0, the IVI Shared Components remain on the system. To remove the remaining components, right-click IVI Shared Components 2.6 and select Uninstall/Change.
Note: If you installed ICP 18.0 as part of another distribution that depends on ICP 18.0, you cannot uninstall ICP 18.0 without uninstalling the dependent product.
LabWindows/CVI Version Support
The IVI Compliance Package provides support only for the latest version of LabWindows/CVI installed on your computer. If you install the IVI Compliance Package on a computer with LabWindows/CVI installed, then upgrade to a later version of LabWindows/CVI, complete the following steps to modify the IVI Compliance Package installation to get IVI support for the later version of LabWindows/CVI:
From the Control Panel, select Uninstall a Program.
Select National Instruments Software.
Select NI IVI Compliance Package 18.0 and click Modify.
For the LabWindows/CVI Support feature under IVI Class Drivers, select Remove this feature and complete the installation.
Repeat steps 1 through 3.
For the LabWindows/CVI Support feature under IVI Class Drivers, select Install this feature to a local drive and complete the installation.
This process removes IVI class driver support for the previous version of LabWindows/CVI and adds this support for the later version of LabWindows/CVI.
Product Security and Critical Updates
Visit ni.com/security to view and subscribe to receive security notifications about National Instruments products. Visit ni.com/critical-updates for information about critical updates from National Instruments.
New Features and Bug Fixes
This release includes the following new features and bug fixes:
CAR#672626: Allow adding new repeated capabilities on-the-fly
CAR#650181: ICP installer no longer unlocks the VXIPNP directory
CAR#671190: Updated the IVI class driver header files for IviDigitizer, IviPwrMeter, and IviSpecAn to include defined values for function parameters
Include IVI Shared Components 2.6
Miscellaneous installer changes
Known Issues
National Instruments IVI libraries, tools, and utilities support only single-byte character strings. You cannot use multi-byte characters, such as those commonly used in Chinese, Japanese, and Korean operating systems. Only single-byte characters, such as ASCII characters, may be passed to IVI function calls, used to set directory paths, and used to create entries in the MAX IVI Configuration Utility.
NI-Spy is now known as NI I/O Trace. Images in the National Instruments IVI Driver Help continue to reflect the NI-Spy name. However, the general functionality depicted in the images remains the same.
To build the IVI Class Simulation drivers using LabWindows/CVI 2015 or later, make sure to include the htmlhelp.lib and BufferOverflowU.lib files from the Windows SDK version 8.1.
Known Incompatibilities
In ICP 18.0 and IVI Shared Components 2.6, the installers no longer unlock the IVI Foundation directory. Therefore, you no longer can modify the files installed under the IVI Foundation directory. Furthermore, if you want to make IVI configuration changes in MAX, you must launch MAX with Administrator privileges.
LabVIEW NXG Support and Considerations
The following sections detail considerations for using LabVIEW NXG with ICP 18.0.
LabVIEW NXG Operating Systems and System Requirements
Software support for LabVIEW NXG differs in the following ways:
LabVIEW NXG Help
View context help in LabVIEW by pressing <Ctrl-H> and hovering over an object.
Search for items using the search bar in the upper right corner of the LabVIEW window. You can also view context help for the search results.
Additional documentation is available online at ni.com/manuals.
LabVIEW NXG Examples
Launch LabVIEW and click the Learning tab.
LabVIEW lessons are located in the Lessons tab, and LabVIEW Examples are located in the Examples tab. Follow the instructions in the lessons and examples.
Automating the Installation of NI Products
You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes. However, starting with the August 2012 releases (products using NI Installers version 3.1 or later), you may need to perform additional steps before or during a silent installation of NI software.
If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software.
For more information about automating the installation of NI products, refer to the following KnowledgeBase articles:
For more information about silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.
For more information about silent installations of NI products in a suite, such as NI Developer Suite, refer to KB 4GGGDQH0, Automating the Installation of a Suited Installer.
To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My National Instruments Installer?.
Using NI Software with Microsoft Windows 10
Microsoft Windows 10 is the latest version of the Windows operating system and features significant changes compared to previous versions. Windows 10 introduces several new capabilities and also combines features from both Windows 7 and Windows 8. For more information about NI support for Windows 10, ni.com/windows10.
Using NI Software with Microsoft Windows 8.1
When you install National Instruments software on Microsoft Windows 8.1, you will notice a few additional tiles in the Apps view, including shortcuts to NI application software products such as NI LabVIEW, Measurement & Automation Explorer (NI MAX), and NI Launcher. For more information about NI support for Windows 8.1, visit ni.com/windows8.
Legal Information
Copyright
© 1999–2018 National Instruments. All rights reserved.
Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
End-User License Agreements and Third-Party Legal Notices
You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:
Notices are located in the <National Instruments>_Legal Information and <National Instruments> directories.
EULAs are located in the <National Instruments>SharedMDFLegallicense directory.
Review <National Instruments>_Legal Information.txt for information on including legal information in installers built with NI products.
U.S. Government Restricted Rights
If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 for military agencies.
IVI Foundation Copyright Notice
Content from the IVI specifications reproduced with permission from the IVI Foundation.
The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
Trademarks
Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on National Instruments trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.
Patents
For patents covering the National Instruments products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.
376942B-01
