下载中心

Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活，以下链接可下载：
NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本
http://pcmv.cn/thread-490-1-1.html

视觉论坛的各种资源，除了视觉相关的模块有使用外，大部分的都不会使用，所以仅提供资源不能提供技术支持。资源的下载地址一般会同时提供NI官方地址和百度网盘的下载地址。某些工具包NI的地址失效或没有NI的下载地址，那视觉论坛也没有办法，只能尝试使用百度网盘地址下载；如果百度网盘的下载地址失效过期，可联系论坛客服更新。现在NI的下载服务器对我国IP地址不是很友好，有些时候速度很慢或大的资源下载很容易出错，这样会造成安装过程各种类型报错而无法安装。建议在下载完成后，对下载资源做校验和验证（NI一般会提供MD5或SHA256等），与官方或视觉论坛提供的校验和对比，一致就可以安装，如果不一致，则需要重新下载。视觉论坛早期下载的资源，那时候NI没有这么多限制，基本上都是正常下载的资源；后期下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘，所以百度网盘的资源基本上是正确的。校验和工具下载地址：
文件Hash计算器FHash,文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算
http://pcmv.cn/thread-26524-1-1.html

NI IVI Compliance Package 16.0.1 Win32/64Eng NI IVI合规软件包16.0.1下载

IVI合规软件包
IVI Compliance Package包含IVI类驱动程序和支持库，用于开发和利用基于IVI互换性的应用程序。
IVI Compliance Package包含了IVI类驱动程序、仿真驱动程序和基于IVI的NI编程环境的应用案例。IVI Compliance Package基于IVI Foundation制定的最新仪器编程规范，并遵守该规范。IVI Compliance Package中的IVI类驱动程序可与专门IVI专用的驱动程序配合使用。

Win32/64Eng
16.0.1
文件大小: 202434279 字节 (193.06 MB)
修改日期: 2019-06-25 02:45
MD5: caf88212a1ca8f35dfba74e8b5a3abb5
SHA1: ef385c8d29d2193606fdba8a8751605e69f62fef
SHA256: 16759e81f48b68e3a2235313b1e045837da3d38f373480057cf7edb74651870e
CRC32: 060daf5b

百度网盘和NI官方下载地址：

NI IVI Compliance Package 16.0.1 Win32/64Eng NI IVI合规软件包16.0.1下载

http://pcmv.cn/thread-26041-1-1.html?fromuid=9

(出处: 视觉论坛VISIONBBS|视觉之家VISIONHOME)

NI IVI Compliance Package 16.0.1 Readme

Installed Components

• IVI class drivers

• IVI class simulation drivers

• IVI class driver LabWindows/CVI support

• IVI class driver wrappers for LabVIEW 2013, 2014, 2015 and 2016

• IVI class driver examples for LabWindows/CVI, LabVIEW, and Measurement Studio

• IVI-COM adapters (32-bit only)

• IVI Shared Components 2.4.1

• IVI configuration plug-in for Measurement & Automation Explorer (MAX) 4.7 and later

• Documentation
  

System Requirements

• Windows 10 (32-bit or 64-bit)

• Windows 8.1 Update 1 (32-bit or 64-bit)

• Windows 7 SP1 (32-bit or 64-bit), including Starter Edition (32-bit)

• Windows Server 2012 R2 (64-bit)

• Windows Server 2008 R2 (64-bit)
  

NI Application Software Support

Installation Instructions

• For compatibility reasons, ICP 16.0.1 installation process enables write permissions for the IVI Standard Root directories (defaults: Program FilesIVI FoundationIVI and Program Files(x86)IVI FoundationIVI) on Windows 7 Service Pack 1, and Windows 8.1 systems.

• National Instruments recommends that you close all other applications before you install ICP 16.0.1.
  

• Download ICP 16.0.1 self-extracting archive file from http://www.ni.com/downloads by navigating through the Drivers and Updates link.

• Double-click the self-extracting archive file to launch the installer.

• Click OK to begin installation.

• Follow the directions that appear on the screen.
  

• ICP 16.0.1 stand-alone, web-only distribution does not install NI I/O Trace (formerly known as NI-Spy) or MAX. You can install NI I/O Trace and MAX using several other National Instruments products, including the NI Device Drivers media.

• The installation directory for LabWindows/CVI IVI Class examples and IVI Class Simulation drivers has been changed. The new installation directory is <All Users>DocumentsNational InstrumentsCVISamplesIVI directory.

• ICP 3.2 and later versions include IVI-COM adapters, which enable users to use IVI-C and IVI-COM specific drivers interchangeably in the same 32-bit application. For more information on IVI-COM adapters, refer to the IVI-C Class Driver Support for IVI-COM Specific Drivers document.

• ICP 4.5 and later versions install alternate FP and SUB files for the IviFgen class driver in order to support setting 64-bit integer attributes. For more information, refer to KnowledgeBase 5WOA752F: Issue Setting IviFgen Attribute ID Using Get/Set/CheckAttributeViInt64 Functions.

• If you use ICP 4.5 or later to build a driver, it will work on a system that has ICP 2.5 or later. In addition, all specific drivers on IDNet have been rebuilt with ICP 4.6.1.
  

Uninstall Considerations

• From the Control Panel, select Uninstall a Program.

• Select National Instruments Software.

• Select NI IVI Compliance Package 16.0.1.

• Click Remove.
  

Product Security and Critical Updates

New Features and Bug Fixes

• Add functions Ivi_AttributeIsAvailable and Ivi_SessionIsAvailable (CAR 569968)

• Decoupling VISA header from IVI header (CAR 530691)

• IVI MAX Provider improvements for 64-bit MI Soft Front Panel (CAR 575894)

• IVI-COM Adapter IviFgen 5.2 support (CAR 315782)
  

Driver Version Naming Changes

Known Issues

• When installing a user-built distribution configured for distribution media smaller than 200MB that includes a Modular Instruments Run-Time distribution, an installation error might occur. Please refer to KnowledgeBase 5CT96RW1: NI IVI Engine Installation Failure When Included in User-Built Distribution for more information.

• If IVI Shared Components 2.4.1 or later is already installed when the ICP 16.0.1 installer is run, the IVI Shared Components feature(s) in the feature tree will not be displayed.

• Because it has a ViInt64 attribute, the IviDigitizer Class Driver function panel file is in the CVI 8.5 format, which is incompatible with LabWindows/CVI versions prior to 8.5. Due to a known issue in LabWindows/CVI 8.5, the Get/Set/Check Attribute function panels do not display the enumerated values in the "Attribute Value" field when the FP format is 8.5. To enter a value manually, you may press "Ctrl+T". Because of this known issue, CVI 9.0.1 or later is recommended for use with the IviDigitizer FP file.

• In the IVI Configuration Utility in MAX, the NI-DAQ™mx devices (both simulated devices and physical devices) will appear in the Resource Descriptor list in the Hardware Assets table only if you have NI-DAQ™mx 9.2 or later installed.

• National Instruments IVI libraries, tools, and utilities support only single-byte character strings. You cannot use multi-byte characters, such as those commonly used in Chinese, Japanese, and Korean operating systems. Only single-byte characters, such as ASCII characters, may be passed to IVI function calls, used to set directory paths, and used to create entries in the MAX IVI Configuration Utility.

• NI-Spy is now known as NI I/O Trace. Images in the National Instruments IVI Driver Help continue to reflect the NI-Spy name. However, the general functionality depicted in the images remains the same.
  

Known Incompatibilities

• The IVI Specific Driver Test Suite in LabWindows/CVI 2009 requires ICP 4.1 or later.

• The IVI Specific Driver Test Suite in LabWindows/CVI 2010 SP1 or later requires ICP 4.5 or later.
  

Automating the Installation of NI Products

• For more information about silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.

• For more information about silent installations of NI products in a suite, such as NI Developer Suite, refer to KB 4GGGDQH0, Automating the Installation of a Suited Installer.

• To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My National Instruments Installer?.
  

Using NI Software with Microsoft Windows 10

Using NI Software with Microsoft Windows 8.1

Using NI Launcher

Pinning Frequently Used Applications

Finding All Programs

NI IVI Compliance Package Drops Support for Microsoft Windows Vista, Windows XP, and Windows Server 2003 R2 in 2016

Legal Information

• Notices are located in the <National Instruments>_Legal Information and <National Instruments> directories.

• EULAs are located in the <National Instruments>SharedMDFLegallicense directory.

• Review <National Instruments>_Legal Information.txt for information on including legal information in installers built with NI products.