Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活，以下链接可下载：
NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本
http://pcmv.cn/thread-490-1-1.html
视觉论坛的各种资源，除了视觉相关的模块有使用外，大部分的都不会使用，所以仅提供资源不能提供技术支持。资源的下载地址一般会同时提供NI官方地址和百度网盘的下载地址。某些工具包NI的地址失效或没有NI的下载地址，那视觉论坛也没有办法，只能尝试使用百度网盘地址下载；如果百度网盘的下载地址失效过期，可联系论坛客服更新。现在NI的下载服务器对我国IP地址不是很友好，有些时候速度很慢或大的资源下载很容易出错，这样会造成安装过程各种类型报错而无法安装。建议在下载完成后，对下载资源做校验和验证（NI一般会提供MD5或SHA256等），与官方或视觉论坛提供的校验和对比，一致就可以安装，如果不一致，则需要重新下载。视觉论坛早期下载的资源，那时候NI没有这么多限制，基本上都是正常下载的资源；后期下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘，所以百度网盘的资源基本上是正确的。校验和工具下载地址：
文件Hash计算器FHash,文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算
http://pcmv.cn/thread-26524-1-1.html
LabVIEW Modulation Toolkit 19.0 Win32/64Eng LabVIEW调制工具包2019
LabVIEW调制工具包
LabVIEW调制工具包为LabVIEW提供了调制信号生成和分析功能，适用于研究、设计、原型，验证和测试应用。
LabVIEW调制工具包是LabVIEW的一个软件附件，提供了用于生成、分析、处理和可视化模拟和数字调制信号的功能和工具。该工具包可让您使用各种调制方案（包括AM、FM、PM、ASK、FSK、MSK、PSK和QAM）对信号进行调制和解调。使用LabVIEW调制工具包，您可以执行信道编码、交织编码和均衡等等高级信号处理，也可以测量频率误差、误差矢量幅度(EVM)和误码率(BER)等参数，以验证信号质量。使用LabVIEW调制工具包，您还可以应用常见的信号减损，并通过星座图、眼图和网格图等可视化工具查看信号。
Win32/64Eng
19.0
文件大小: 706363392 字节 (673.64 MB)
修改日期: 2019-05-16 06:49
MD5: a0f416b5182055f415b2640514784aee（官方正确）
SHA1: 639e5df14485c1c69944bdcbd958ae053ce0acee
SHA256: ed97120e03c44d00eddef99c8f5f2a9acb36e2599c2ce5950a658103cfe46250
CRC32: 2034b275
百度网盘与NI官方下载地址：
LabVIEW Modulation Toolkit 19.0 Win32/64Eng LabVIEW调制工具包2019
http://pcmv.cn/thread-25975-1-1.html?fromuid=9
(出处: 视觉论坛VISIONBBS|视觉之家VISIONHOME)
Modulation Toolkit 19.0 Readme
May 2019
This file contains important information about the Modulation Toolkit, including installation instructions, new features, bug fixes for Modulation Toolkit 19.0, and known issues.
Overview
System Requirements
Supported Operating Systems
Application Software Support
Installation Instructions
Product Security and Critical Updates
New Features
Supported Hardware
Known Issues
Bug Fixes
Accessing the Help
Finding Examples
Automating the Installation of NI Products
Using NI Software with Microsoft Windows 10
Using NI Software with Microsoft Windows 8.1
Modulation Toolkit Drops Support for Windows 7 (32- and 64-Bit), Windows Server 2008 R2, and All 32-Bit Windows Operating Systems in 2021
Legal Information
Overview
Modulation Toolkit provides signal generation and analysis capabilities for analog and digital modulation schemes.
System RequirementsMinimum Requirements
Processor—1 GHz or faster 32-bit (x86) or 64-bit (x64) processor
RAM—1 GB RAM (32-bit) or 2 GB RAM (64-bit)
A screen resolution of 1,024 x 768
Windows 10/8.1/7, with all available critical updates and service packs
Recommended System
Processor—Intel Core i5 or equivalent
RAM—4 GB
A screen resolution of 1,024 x 768
Windows 10/8.1/7, with all available critical updates and service packs
If your application runs on an RT target, NI recommends that you have at least 128 MB of RAM
Supported Operating Systems
Modulation Toolkit 19.0 supports the following operating systems:
1 NI software installs VC2015 Runtime and .NET 4.6.2. Windows 8.1 and Windows Server 2012 R2 require Microsoft updates to support these items. Refer to Microsoft KB2919442 and KB2919355 for more information about how to install these updates.
2 NI software is signed with a SHA-256 certificate. Windows 7 SP1, Windows Embedded Standard 7 SP1, and Windows Server 2008 R2 SP1 require Microsoft updates to support SHA-256. Refer to Microsoft KB3033929 for more information about how to install this security update.
Note Refer to Modulation Toolkit Drops Support for Windows 7 (32- and 64-Bit), Windows Server 2008 R2, and All 32-Bit Windows Operating Systems in 2021 for information about future OS support.
Note In 2016, Modulation Toolkit dropped support for Windows Vista, Windows XP, Windows Server 2003, and installations of Windows 7 without any service packs. Modulation Toolkit 19.0 will not install or run on an unsupported OS. You cannot deploy or distribute applications that use Modulation Toolkit 19.0 to an unsupported OS. Additionally, after installing Modulation Toolkit 19.0, you cannot use any installers built on this computer with any version of LabVIEW, LabWindows™/CVI™, NI TestStand™, or Measurement Studio on an unsupported OS.
For more information about the changes to our OS support for 2016, refer to Why Does My NI ADE Installer Fail on Windows XP/Vista and Windows Server 2003?.
Note Support for Windows 32-bit operating systems may require disabling physical address extension (PAE). To learn how this might affect your system and what actions you might need to take, visit ni.com/info and enter the Info Code PAESupport.
Application Software Support
Modulation Toolkit 19.0 supports the following application software versions, including service packs.
NI LabVIEW 2016, 2017 SP1, 2018 SP1, or 2019
NI LabVIEW Real-Time Module 2016, 2017, 2018 SP1, or 2019
Installation Instructions
Product Security and Critical Updates
Visit ni.com/security to view and subscribe to receive security notifications about NI products. Visit ni.com/critical-updates for information about critical updates from NI.
New Features
Modulation Toolkit 19.0 adds support for LabVIEW 2019 (32- and 64-bit)
Modulation Toolkit 18.0 adds support for LabVIEW 2018 (32- and 64-bit)
Modulation Toolkit 17.0 adds support for LabVIEW 2017 (32- and 64-bit)
Modulation Toolkit 16.0 adds support for LabVIEW 2016 (32- and 64-bit)
Supported HardwareVector Signal Generators
NI PXI-5670
NI PXI-5671
NI PXIe-5672
NI PXIe-5673
NI PXIe-5673E
Device-specific information about these modules is included in the NI RF Signal Generators Help.
Arbitrary Waveform Generators
NI PXIe-5442
NI PXIe-5450
NI PXIe-5451
Vector Signal Analyzers
NI PXI-5660
NI PXI-5661
NI PXIe-5663
NI PXIe-5663E
NI PXIe-5665
NI PXIe-5668R
Device-specific information about these modules is included in the NI RF Vector Signal Analyzers Help.
Vector Signal Transceivers
NI PXIe-5644R
NI PXIe-5645R
NI PXIe-5646R
Device-specific information about these modules is included in the NI RF Vector Signal Transceivers Help.
Digitizers
NI PXI-5621
NI PXI-5620
NI PXI-5122
NI PXI-5124
NI PCI-5122
NI PCI-5124
NI PXI-5922
NI PXI-5142
NI PXIe-5122
NI PXIe-5622
Device-specific information about these modules is included in the NI High-Speed Digitizers Help.
Known Issues
No known issues in Modulation Toolkit 19.0.
Bug Fixes
The following items are the IDs and titles of a subset of issues fixed in the Modulation Toolkit. This is not an exhaustive list of issues fixed in the current version of the Modulation Toolkit. If you have a CAR ID, you can search this list to validate that the issue has been fixed.
The following items are changes in Modulation Toolkit 15.0 from Modulation Toolkit 4.4.
| ID | Fixed Issue |
| 521869 | Fixed an issue where the MT examples for NI-Scope had an NI-RFSA dependency. |
| 525695 | Fixed an issue where OQPSK intermittently reported NaN as the result for the I/Q Gain Imbalance and the Quadrature Skew measurements. |
| 508707 | Fixed an issue where intermittent loss of samples occurred during continuous digital demodulation. |
The following items are changes in Modulation Toolkit 4.4 from Modulation Toolkit 4.3.4.
| ID | Fixed Issue |
| 389508 | Fixed DWarn 0x262C7578. |
| 402017 | Fixed an issue where MSK demodulation returned a high EVM. |
| 462305 | Fixed an issue where MSK recovered an incorrect constellation when the pulse shaping filter was set to None. |
| 362507 | Fixed an issue where installing MT 4.3.3 did not install the digital modulation related files on LabVIEW 2012. |
| 404991 | Fixed an issue where controls could not be created for the Modulation Toolkit classes. |
| 415930 | Fixed an issue where the OQPSK demodulation did not lock to the constellation consistently. |
| 426459 | Fixed an issue where EVM variations were observed in 8-PSK and 16-PSK demodulation. |
The following items are changes in Modulation Toolkit 4.3.4 from Modulation Toolkit 4.3.3.
| ID | Fixed Issue |
| 362507 | Fixed an issue where installing Modulation Toolkit 4.3.3 did not install Digital Modulation Toolkit VIs on LabVIEW 2012. |
| 374121 | Fixed an issue where Modulation Toolkit did not install on LabVIEW 2012. |
| 404822 | Fixed an issue where multiple shortcuts to documents were present in the Start Menu folder for the Modulation Toolkit. |
Accessing the Help
Refer to the Modulation Toolkit Help, accessible from Start»National Instruments»Modulation Toolkit»Modulation Toolkit Documentation, for information about the Modulation Toolkit Help.
Finding Examples
In LabVIEW, you can use the NI Example Finder to search or browse examples. Modulation Toolkit examples are classified by keyword, so you can search for a particular device or measurement function. In LabVIEW, select Help»Find Examples to launch the NI Example Finder. The NI Example Finder offers two ways to access all installed LabVIEW example VIs (including NI–RFSG and Modulation Toolkit examples) and their descriptions:
Click the Browse tab to locate modulation examples by task at Toolkit and Modules»Modulation or by directory structure at Modulation.
Click the Search tab to search all installed examples by keyword. For example, search for "Modulation" to locate all Modulation Toolkit examples.
You can also access all the installed Modulation Toolkit examples for LabVIEW at Start»National Instruments»Modulation Toolkit»Modulation Toolkit Examples.
Examples also are available online that demonstrate integrating NI RF signal generators with NI RF signal analyzers and NI toolkit software including the Modulation Toolkit. Refer to ni.com/examples for these examples and for more information.
Select Help»Find Examples from LabVIEW to launch the NI Example Finder. LabVIEW examples for the Modulation Toolkit are located in the labviewexamplesModulation directory. You can modify an example VI to fit an application, or you can copy and paste from one or more examples into a VI that you create.
Automating the Installation of NI Products
You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes.
If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software.
For more information about automating the installation of NI products, refer to the following KnowledgeBase articles:
For more information about silent installations of individual NI products, refer to Customize and Automate Installation of a Single Installer.
For more information about silent installations of NI products in a suite, such as NI Developer Suite, refer to Customize and Automate Installation of a Suited Installer.
To determine what version of NI Installers your product contains, refer to Determine Type and Version of My National Instruments Installer.
Using NI Software with Microsoft Windows 10
Microsoft Windows 10 is the latest version of the Windows operating system and features significant changes compared to previous versions. Windows 10 introduces several new capabilities and also combines features from both Windows 7 and Windows 8. For more information about NI support for Windows 10, visit ni.com/windows10.
Using NI Software with Microsoft Windows 8.1
When you install NI software on Microsoft Windows 8.1, you will notice a few additional tiles in the Apps view, including shortcuts to NI application software products such as NI LabVIEW, Measurement & Automation Explorer (NI MAX), and NI Launcher. For more information about NI support for Windows 8.1, visit ni.com/windows8.
Modulation Toolkit Drops Support for Windows 7 (32- and 64-Bit), Windows Server 2008 R2, and All 32-Bit Windows Operating Systems in 2021
Modulation Toolkit will drop support for Windows 7 (32- and 64-bit), Windows Server 2008 R2, and all 32-bit Windows operating systems starting in 2021. Versions of this product that ship after May 1, 2021, will not install or run on these operating systems. For detailed information about NI operating system support, visit ni.com/r/win32bitsupport.
For detailed information about NI application software product life cycles, visit ni.com/info and enter one of the following Info Codes:
| Product | Info Code |
| LabVIEW | lifecycle |
| LabWindows/CVI | cvi_lifecycle |
| Measurement Studio | mstudiolifecycle |
| TestStand | tslcp |
| DIAdem | ddlcp |
| SignalExpress | selcp |
| VeriStand | nivslifecycle |
Legal Information
Copyright
© 2002–2019 National Instruments. All rights reserved.
Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
NI respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
End-User License Agreements and Third-Party Legal Notices
You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:
Notices are located in the <National Instruments>_Legal Information and <National Instruments> directories.
EULAs are located in the <National Instruments>SharedMDFLegallicense directory.
Review <National Instruments>_Legal Information.txt for information on including legal information in installers built with NI products.
U.S. Government Restricted Rights
If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.
IVI Foundation Copyright Notice
Content from the IVI specifications reproduced with permission from the IVI Foundation.
The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
Trademarks
Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on NI trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.
Patents
For patents covering the NI products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the NI Patent Notice at ni.com/patents.
375435E-01
