下载中心

LabVIEW Touch Panel Module 2010 Win32Eng LabVIEW触摸屏模块2010版下载

文章来源:石鑫华视觉网时间:2022-05-17 13:15:41 点击:451

Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活，以下链接可下载：
NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本
http://pcmv.cn/thread-490-1-1.html

视觉论坛的各种资源，除了视觉相关的模块有使用外，大部分的都不会使用，所以仅提供资源不能提供技术支持。资源的下载地址一般会同时提供NI官方地址和百度网盘的下载地址。某些工具包NI的地址失效或没有NI的下载地址，那视觉论坛也没有办法，只能尝试使用百度网盘地址下载；如果百度网盘的下载地址失效过期，可联系论坛客服更新。现在NI的下载服务器对我国IP地址不是很友好，有些时候速度很慢或大的资源下载很容易出错，这样会造成安装过程各种类型报错而无法安装。建议在下载完成后，对下载资源做校验和验证（NI一般会提供MD5或SHA256等），与官方或视觉论坛提供的校验和对比，一致就可以安装，如果不一致，则需要重新下载。视觉论坛早期下载的资源，那时候NI没有这么多限制，基本上都是正常下载的资源；后期下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘，所以百度网盘的资源基本上是正确的。校验和工具下载地址：
文件Hash计算器FHash,文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算
http://pcmv.cn/thread-26524-1-1.html

LabVIEW Touch Panel Module 2010 Win32Eng LabVIEW触摸屏模块2010版下载

LabVIEW触摸屏模块
LabVIEW触摸屏模块用于开发触摸屏计算机所需的应用程序。
LabVIEW触摸屏模块是一款软件附加工具，可用于创建和部署人机界面(HMI)应用程序，以便与CompactRIO系统等嵌入式实时平台进行通信。此工具包含多种用户界面开发工具，并具有通信、数据分析和数据存储功能。借助该附加工具，即可通过共享变量、TCP/IP或其他协议与控制器进行通信。您还可以借助内置LabVIEW演示工具，向操作人员显示重要信息。LabVIEW触摸屏模块经过优化，可将HMI部署于运行Windows Embedded Standard系统的NI或第三方工业触摸屏计算机。

2010
文件大小: 105224800 字节 (100.35 MB)
修改日期: 2012-08-03 21:30
MD5: 125d89aff63e8db0586a26adaa95c2a9（官方正确）
SHA1: 5c6683db42526c4542442acec548bc83db8eaff9
SHA256: cef7135589e9c25d138bc3ff5abc345e030c025ef78da78cc10b21e2da8291d6
百度网盘和NI官方下载地址：

http://pcmv.cn/thread-25289-1-1.html?fromuid=9

(出处: 视觉论坛VISIONBBS|视觉之家VISIONHOME)

LabVIEW 2010 Touch Panel Module Readme

Version 10.0

June 2010

This file contains important last-minute information about the LabVIEW 2010 Touch Panel Module, including installation issues.

System Requirements
Supported Operating Systems
Installing the Touch Panel Module
Known Issues
Bug Fixes
Resources
Important Information

System Requirements

The Touch Panel Module has the following system requirements:

LabVIEW Base, Full, or Professional Development System
2.5 GB available disk space
(Windows CE) A Touch Panel device, such as the NI TPC-2006, running Windows CE 4.2 or 5.0
(XP Embedded) A Touch Panel device, such as the NI TPC-2512, running Windows XP Embedded

Supported Operating Systems

The Touch Panel Module supports the following operating systems:

Windows 7 (32-bit and 64-bit)
Windows Vista (32-bit and 64-bit)
Windows XP (32-bit)
Windows Server 2003 R2 (32-bit)
Windows Server 2008 R2 (64-bit)

The Touch Panel Module does not support Windows NT/Me/98/95/2000 or the Windows Server non-R2 editions.

Installing the Touch Panel Module

You can install all of your LabVIEW products—including the Touch Panel Module—using the LabVIEW 2010 Platform DVDs. You can find installation instructions for the Touch Panel Module along with activation instructions in the following locations:

LabVIEW Release Notes, which are available in your LabVIEW software kit.
LabVIEW 2010 Platform DVDs Readme, which is available on the top-level of LabVIEW Platform DVD 1.

To request additional LabVIEW 2010 Platform DVDs, refer to the National Instruments Web site.

Note If you purchased this product with an NI Software Suite or NI Product Bundle, use the installation media that shipped with your purchase to install this product.

Additional Installation Information

This section contains information that you might find helpful as you install the Touch Panel Module.

The Touch Panel Module runs in evaluation mode if you do not activate it. In evaluation mode, you can create VIs, but any Touch Panel applications you build run only for five minutes. You have the option of activating the Touch Panel Module at the end of the installation. You also can use the NI License Manager, available by selecting Start»All Programs»National Instruments»NI License Manager, to activate National Instruments products. Refer to the National Instruments License Manager Help, available by selecting Help»Contents in the NI License Manager, for more information about activating NI products.
The Touch Panel Module includes Microsoft tools, such as Microsoft ActiveSync on Windows XP. Some of these Microsoft tools might interfere with any existing installations of Visual Studio, Windows Embedded, or Windows CE toolkits.
(Windows XP) The Touch Panel Module installs ActiveSync 4.2 if you do not already have ActiveSync 4.2 or later installed. The Touch Panel Module works with ActiveSync 4.2 or later.
(Windows Vista/7) You must install Windows Mobile Device Center to use the Touch Panel Module. Refer to the Microsoft Web site at www.microsoft.com to download Windows Mobile Device Center.
You might need to install the additional tools, such as NI-DAQmxBase, NI TPC Service support, Shared Variable support, or NI-VISA, to use the Touch Panel Module. Refer to the Installing Additional Tools section of the Getting Started with the LabVIEW Touch Panel Module manual for more information about additional tools.

Uninstalling the Touch Panel Module (Windows CE)

If you uninstall the Touch Panel Module, you also must uninstall the following:

(Windows XP) Microsoft ActiveSync
(Windows Vista/7) Windows Mobile Device Center
Microsoft Device Emulator version 1.0 – ENU
Microsoft Visual C++ 2005 Redistributable

Known Issues

You can access the software and documentation known issues list online. Refer to the National Instruments Web site for an up-to-date list of known issues in the LabVIEW 2010 Touch Panel Module.

Bug Fixes

The following table contains the IDs and titles of a subset of issues fixed in LabVIEW 2010 Touch Panel Module. This table is not an exhaustive list of issues fixed in the current version of the Touch Panel Module. If you have a CAR ID, you can search this list to validate the issue has been fixed.

ID	Fixed Issue
160961	Cannot cancel the Configure Jump Button dialog box when you first place a Jump Button control.
177101	Using shared variables on an XP Embedded target causes a build error if the library containing the variable has not been saved.

Resources

LabVIEW includes extensive online and PDF documentation for new and experienced LabVIEW users. Refer to the Related Documentation section in the Getting Started with the Touch Panel Module manual for more information about LabVIEW documentation. Visit the National Instruments Web site at ni.com for software drivers and updates, a searchable KnowledgeBase, product manuals, step-by-step troubleshooting wizards, thousands of example programs, tutorials, application notes, instrument drivers, and so on.

Important Information

Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.

National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.

Trademarks

LabVIEW, National Instruments, NI, ni.com, the National Instruments corporate logo, and the Eagle logo are trademarks of National Instruments Corporation. Refer to the Trademark Information at ni.com/trademarks for other National Instruments trademarks.

Other product and company names mentioned herein are trademarks or trade names of their respective companies.

Patents

For patents covering the National Instruments products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.

下载中心

LabVIEW Touch Panel Module 2010 Win32Eng LabVIEW触摸屏模块2010版下载