石鑫华视觉 手机微信QQ:13450001061 / 18038383457

下载中心

LabVIEW 2010SP1f4 LEGO MINDSTORMS NXT Module for MAC

文章来源:石鑫华视觉网时间:2022-05-17 12:34:39 点击:230

Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活，以下链接可下载：
NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本
http://pcmv.cn/thread-490-1-1.html

视觉论坛的各种资源，除了视觉相关的模块有使用外，大部分的都不会使用，所以仅提供资源不能提供技术支持。资源的下载地址一般会同时提供NI官方地址和百度网盘的下载地址。某些工具包NI的地址失效或没有NI的下载地址，那视觉论坛也没有办法，只能尝试使用百度网盘地址下载；如果百度网盘的下载地址失效过期，可联系论坛客服更新。现在NI的下载服务器对我国IP地址不是很友好，有些时候速度很慢或大的资源下载很容易出错，这样会造成安装过程各种类型报错而无法安装。建议在下载完成后，对下载资源做校验和验证（NI一般会提供MD5或SHA256等），与官方或视觉论坛提供的校验和对比，一致就可以安装，如果不一致，则需要重新下载。视觉论坛早期下载的资源，那时候NI没有这么多限制，基本上都是正常下载的资源；后期下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘，所以百度网盘的资源基本上是正确的。校验和工具下载地址：
文件Hash计算器FHash,文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算
http://pcmv.cn/thread-26524-1-1.html

LabVIEW 2010SP1f4 LEGO MINDSTORMS NXT Module for MAC

LEGO MINDSTORMS Module for LabVIEW

LEGO MINDSTORMS Module模块用于帮助学生使用基于LEGO MINDSTORMS EV3和NXT的机器人。

LEGO MINDSTORMS模块是用于LabVIEW的一款系统工程软件，学生可以在教室或机器人竞赛中结合LEGO Education机器人平台使用该软件。该软件可作为教学工具，帮助学生对LEGO MINDSTORMS机器人进行视觉控制和编程。LEGO MINDSTORMS模块可以将任何LEGO MINDSTORMS Education平台改造为科学和工程学习平台。该模块还提供包括教程和交互式练习，旨在帮助学生进一步提高LabVIEW技能。LEGO、LEGO商标和MINDSTORMS是LEGO集团的注册商标。 版权.2020 the LEGO Group。

2010SP1f4
文件大小: 108286869 字节 (103.27 MB)
修改日期: 2012-09-06 23:39
MD5: eb23fe3b664a27e414add09085c9d262
SHA1: 22e4867ff99843bbec22bd3bbe18e6719c30618a
SHA256: e145bef3037616e8da6934bf89a1655dd582717fcf19c6e5c783c69af858561f
CRC32: c3690f0e

百度网盘和NI官方下载地址：

LabVIEW 2010SP1f4 LEGO MINDSTORMS NXT Module for MAC

http://pcmv.cn/thread-25092-1-1.html?fromuid=9

(出处: 视觉论坛VISIONBBS|视觉之家VISIONHOME)



LabVIEW 2010 Service Pack 1 LEGO® MINDSTORMS® NXT Module f4 Readme

August 2012
This file contains information about the LabVIEW NXT Module.
Overview
System Requirements
Changes and Bug Fixes
Known Issues
Accessing the Help
Finding Applications and Examples

Overview

Use the LabVIEW NXT Module to create VIs that either run directly on an NXT brick or that run on a host computer and communicate with an NXT brick through a USB, Bluetooth, or Wi-Fi connection.

System Requirements

The LabVIEW NXT Module requires the LabVIEW 2010 Service Pack 1 (SP1) Full or Professional Development System.
Refer to the LabVIEW 2010 SP1 Readme on the National Instruments website for information about system requirements for LabVIEW 2010 SP1.

Changes and Bug Fixes

The LabVIEW NXT Module includes the following changes and bug fixes:

  • FeedWatchdog only updates DC motors.

  • PlayTone is in the NXT schematic plugin.

  • CloseFile no longer leaves open file handles.

  • ReadFile no longer hangs on invalid file names.

  • VIs in a robot project (.lvrbt) update correctly when edited.

Refer to the National Instruments website for a list of bug fixes in LabVIEW 2010 SP1.

Known Issues

The following list describes known issues at the time of release:

  • (Windows) A LabVIEW crash, an error message about Fantom.dll, and inconsistent behavior from the NXT Terminal are all consequences of deleting dependencies of Fantom.dll. To correct this behavior, navigate to the Control PanelProgramsPrograms and Features directory and repair the LEGO MINDSTORMS NXT Driver installation.

  • (Mac OS X) Built-in Broadcom Bluetooth adapters on Macintosh computers perform poorly while trying to communicate with an NXT brick. You can get better Bluetooth performance by using an external USB Bluetooth adapter with a Cambridge Silicon chipset such as the ABE 22S. Complete the following steps to check the chipset of your Bluetooth adapter.

    • Click the Apple icon on the toolbar and select About this Mac.

    • In the dialog box that appears, click the More Info button.

    • Expand the Hardware menu in the left window and view the USB Section to see the Bluetooth chipset manufacturer.

  • If the name of a local variable starts with the words sequence or generic refnum, that variable and any attached variables do not execute correctly. Rename the variable so that the name does not start with the words sequence or generic refnum.

  • When you target the NXT brick with an Invoke Node, the compiler handles NXTInput and NXTOutput refnums correctly only if their names begin with Generic Refnum Name.

  • Any calibration you perform on the NXT brick is not taken into account when you read sensor values using the direct command protocol.

  • You cannot wire a floating-point number directly to the type input of the Unflatten From String function. You first must place the floating-point number inside a cluster and then wire the cluster to the type input of the Unflatten From String function.

  • Move in Progress?, Moves in Progress?, and Any Moves in Progress? return TRUE only when performing a move with the TETRIX Move a Fixed Distance VI. These Boolean outputs always return FALSE if the move initiates with the TETRIX Move DC Motors VI.

  • The following code is not supported in VIs that you download to an NXT brick:

    • Auto-indexing on While Loops

    • Flat Sequence structures with multiple frames—Objects you place in parallel within a Sequence structure do not execute in parallel in VIs that you download to an NXT brick. Instead, the objects execute sequentially based on the scheduling order of the compiler.

    • Sequence Locals—Stacked Sequence structures support multiple frames but do not support sequence locals.

    • Case structure values displayed in any radix other than decimal—The NXT brick interprets all values as decimal.

    • Case structures with the error wired to the selector

    • Byte Array To String function if you try to coerce a 32-bit array

    • Numeric operations involving a cluster and an array of clusters

    • Conditional terminal or parallelism on For Loops

    • Some syntax in Formula Nodes—Only a subset of syntax is supported.

    • Password protected VIs

  • Unexpected behavior can occur in the Schematic Editor when you work on a remote desktop.

  • The Schematic Editor only correctly works on 32-bit color depth monitors.

  • NXT Dual-Mode VIs are not supported in LabVIEW stand-alone applications.

Accessing the Help

Refer to the following documents for more information about the LabVIEW NXT Module:

  • LabVIEW NXT Module Help—Use the LabVIEW NXT Module Help to access information about NXT Module programming concepts, step-by-step instructions for using the NXT Module, and reference information about the NXT VIs, palettes, menus, dialog boxes, and so on. Access the LabVIEW NXT Module Help by selecting Help»NXT Module Help.

  • LabVIEW NXT Module Programming Guide—Use this manual to learn about advanced modifications and extensions to LabVIEW that the NXT Module provides. Access this manual by navigating to the labviewmanuals directory and opening NXT_Advanced_Programming_Guide.pdf.

  • LabVIEW Help—Refer to the LabVIEW Help, accessible by selecting Help»LabVIEW Help in LabVIEW, for information about advanced LabVIEW concepts and procedures.

Finding Applications and Examples

Select Tools»NXT Applications to access applications that you can run on an NXT brick. These applications demonstrate several types of programs you can create with the LabVIEW NXT Module.
Access example VIs that demonstrate common tasks using the LabVIEW NXT Module in the NI Example Finder by selecting Help»Find Examples from the pull-down menu and selecting Toolkits and Modules»NXT in the NI Example Finder window. You also can access these VIs by referring to the labviewexamplesNXT Robotics directory. You can modify an example VI to fit an application, or you can copy and paste from one or more examples into a VI that you create.


Fantom 1.2.0 Driver for LabVIEW for LEGO® MINDOSTORMS® Readme

August 2012
This file contains information to introduce you to the Fantom 1.2.0 Driver for LabVIEW for LEGO® MINDSTORMS®.

Overview

The Fantom 1.2.0 Driver is automatically installed with LabVIEW for LEGO MINDSTORMS and allows communication between the NXT brick and the computer.

Known Issues

The following list describes known issues at the time of release:

  • Fantom cannot connect to the Samantha Wi-Fi Module if the network is not configured correctly. Refer to the wireless setup instructions on the FIRST website for the correct network configurations.

  • (Mac OS X) If the computer is connected to the Samantha Wi-Fi Module and an Ethernet cable is plugged into the computer, Fantom loses its connection to the Samantha Wi-Fi Module. Unplug the Ethernet cable from the computer to successfully connect to the Samantha Wi-Fi Module.

  • (Mac OS X) For Mac OS X 10.7, you may need to repair disk permissions to allow for proper installation. Open Disk Utility on the computer and select the appropriate drive. Click Repair Disk Permissions to fix problems that affect the installation of certain files.

  • (Mac OS X) Using Bluetooth with Fantom causes other aspects of the software to slow down. Use an external dongle to use Bluetooth.

Important Information

Copyright
© 2012 National Instruments. All rights reserved.
Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
End-User License Agreements and Third-Party Legal Notices
You can find end-user license agreements (EULAs) and third-party legal notices in the following locations:

  • Notices are located in the <National Instruments>_Legal Information and <National Instruments> directories.

  • EULAs are located in the <National Instruments>SharedMDFLegallicense directory.

  • Review <National Instruments>_Legal Information.txt for information on including legal information in installers built with NI products.

Trademarks
LabVIEW, National Instruments, NI, ni.com, the National Instruments corporate logo, and the Eagle logo are trademarks of National Instruments Corporation. Refer to the Trademark Information at ni.com/trademarks for other National Instruments trademarks.
LEGO and MINDSTORMS are trademarks of the LEGO Group. Other product and company names mentioned herein are trademarks or trade names of their respective companies.
Patents
For patents covering the National Instruments products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.


首页
84162741QQ
联系