Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活，以下链接可下载：
NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本
http://pcmv.cn/thread-490-1-1.html
视觉论坛的各种资源，除了视觉相关的模块有使用外，大部分的都不会使用，所以仅提供资源不能提供技术支持。资源的下载地址一般会同时提供NI官方地址和百度网盘的下载地址。某些工具包NI的地址失效或没有NI的下载地址，那视觉论坛也没有办法，只能尝试使用百度网盘地址下载；如果百度网盘的下载地址失效过期，可联系论坛客服更新。现在NI的下载服务器对我国IP地址不是很友好，有些时候速度很慢或大的资源下载很容易出错，这样会造成安装过程各种类型报错而无法安装。建议在下载完成后，对下载资源做校验和验证（NI一般会提供MD5或SHA256等），与官方或视觉论坛提供的校验和对比，一致就可以安装，如果不一致，则需要重新下载。视觉论坛早期下载的资源，那时候NI没有这么多限制，基本上都是正常下载的资源；后期下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘，所以百度网盘的资源基本上是正确的。校验和工具下载地址：
文件Hash计算器FHash,文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算
http://pcmv.cn/thread-26524-1-1.html
NI-SLSC 17.0 Runtime Driver Win32/64Eng NI开关负载信号调理设备驱动17.0版运行引擎下载
NI-SLSC
NI-SLSC驱动用于支持在NI数据采集设备（如PXI和CompactRIO）上使用开关、负载和信号调理(SLSC)设备。
NI-SLSC是一种仪器驱动程序，为SLSC（开关、负载和信号调理）硬件提供支持。它集成了开关、负载和信号调理功能，可扩展基于PXI和C系列平台的系统功能。SLSC可将连接标准化，并提供模块化方法，适用于信号调理、故障插入和其他测试需求。NI-SLSC还包括一个开关路由API，使您能够在LabVIEW中控制和配置NI和第三方SLSC开关。
17.0RT
文件大小: 96855624 字节 (92.37 MB)
修改日期: 2019-06-25 03:09
MD5: 0bd38c510e45b8e43619079206829006（官方正确）
SHA1: 32dcd11329b53ad46122ba202d8834249e3499de
SHA256: bd3880a55950f19e5d9a77c4a0104cfd3d66cc88c8bf69d958651ce071b8650d
CRC32: 0fe829b5
百度网盘和NI官方下载地址：
NI-SLSC 17.0 Runtime Driver Win32/64Eng NI开关负载信号调理设备驱动17.0版运行引擎下载
http://pcmv.cn/thread-25463-1-1.html?fromuid=9
(出处: 视觉论坛VISIONBBS|视觉之家VISIONHOME)
NI-SLSC 17.0 Readme
May 2017
This file contains important information about NI-SLSC, including any system requirements and any known issues for the application and the driver software.
Supported Operating Systems
Application Software Support
Supported Devices
Known Issues
Enhancements and Bug Fixes
Automating the Installation of NI Products
Using NI Software with Microsoft Windows 10
Using NI Software with Microsoft Windows 8.1
Legal Information
Supported Operating Systems
NI-SLSC supports the following operating systems:
1 NI software is signed with a SHA-256 certificate. Windows 7 SP1, Windows Embedded Standard 7 SP1, and Windows Server 2008 R2 SP1 require Microsoft updates to support SHA-256. Refer to Microsoft KB3033929 for more information about how to install this security update.
Application Software Support
The following table lists the NI application software versions, including service packs, supported by NI-SLSC.
| Application Software | Versions Supported by NI-SLSC |
| LabVIEW | 2015, 2016, 2017 |
| LabVIEW Real-Time Module1 | 2015, 2016, 2017 |
| 1 NI-SLSC supports Phar Lap ETS and Linux RT targets. It does not support VxWorks targets. |
Supported Devices
Product Security and Critical Updates
Visit ni.com/security to view and subscribe to receive security notifications about NI products. Visit ni.com/critical-updates for information about critical updates from NI.
Known Issues
You can access an up-to-date list of known issues in NI-SLSC by visiting ni.com/info and entering ex2t83.
Enhancements and Bug Fixes
Added LabVIEW 2016 and 2017 support.
Added Linux RT support.
Moved SLSC examples to LabVIEW example finder.
Updated chassis status LED to turn green when the chassis is ready to accept network connections, although module discovery may not be complete. Modules may require several more seconds to fully enumerate.
Information about NVMEM areas is now updated correctly after the module is reset.
Updated physical channel names to allow slashes.
Improved reporting chassis firmware and module capabilities for compatibility and versioning.
Updated the firmware for the SLSC-12001 chassis to fix the incorrect device class appearing in the System Configuration API. This fix enables filtering of SLSC chassis using the device class “SLSC."
Improved synchronization when multiple sessions in the same reservation group attempt to access a module. Attempts to write registers, commit properties, or execute commands while a command is in progress will report an error. Other operations are synchronized to allow execution without error while preserving data integrity on the chassis.
Made changes to allow the properties DefaultDevices, DefaultNVMEMAreas, and DefaultPhysicalChannels to now be writeable through the NI-SLSC Session property node. NI-SLSC 1.0 allowed them to be read, but attempts to write to them failed.
Updated web interface for the SLSC-12001 to now indicate that a reboot is required for changed network settings to take effect.
Automating the Installation of NI Products
You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes. However, starting with the August 2012 releases (products using NI Installers version 3.1 or later), you may need to perform additional steps before or during a silent installation of NI software.
If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software.
For more information about automating the installation of NI products, refer to the following KnowledgeBase articles:
For more information about silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.
For more information about silent installations of NI products in a suite, such as NI Developer Suite, refer to KB 4GGGDQH0, How Do I Automate the Installation of a Suited Installer?.
To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My NI Installer?.
Using NI Software with Microsoft Windows 10
Microsoft Windows 10 is the latest version of the Windows operating system and features significant changes compared to previous versions. Windows 10 introduces several new capabilities and also combines features from both Windows 7 and Windows 8. For more information about NI support for Windows 10, visit ni.com/windows10.
Using NI Software with Microsoft Windows 8.1
When you install NI software on Microsoft Windows 8.1, you will notice a few additional tiles in the Apps view, including shortcuts to NI application software products such as NI LabVIEW, Measurement & Automation Explorer (NI MAX), and NI Launcher. For more information about NI support for Windows 8.1, visit ni.com/windows8.
Legal Information
Copyright
© 2016–2017 National Instruments. All rights reserved.
Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
NI respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
End-User License Agreements and Third-Party Legal Notices
You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:
Notices are located in the <National Instruments>_Legal Information and <National Instruments> directories.
EULAs are located in the <National Instruments>SharedMDFLegallicense directory.
Review <National Instruments>_Legal Information.txt for information on including legal information in installers built with NI products.
U.S. Government Restricted Rights
If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.
IVI Foundation Copyright Notice
Content from the IVI specifications reproduced with permission from the IVI Foundation.
The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
Trademarks
Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on NI trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.
Members of the NI Alliance Partner Program are business entities independent from NI and have no agency, partnership, or joint-venture relationship with NI.
Patents
For patents covering the NI products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the NI Patent Notice at ni.com/patents.
376773B-01
