Windows系统下(Linux和MAC系统下请自行了解清楚)NI的各种软件、模块、工具包、驱动程序,使用NI许可证管理器来激活的,绝大部分的都可以使用NI Lincense Activator来激活,以下链接可下载:
NI序列号Serial Number生成激活工具NI License Activator,LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本
http://pcmv.cn/thread-490-1-1.html
视觉论坛的各种资源,除了视觉相关的模块有使用外,大部分的都不会使用,所以仅提供资源不能提供技术支持。资源的下载地址一般会同时提供NI官方地址和百度网盘的下载地址。某些工具包NI的地址失效或没有NI的下载地址,那视觉论坛也没有办法,只能尝试使用百度网盘地址下载;如果百度网盘的下载地址失效过期,可联系论坛客服更新。现在NI的下载服务器对我国IP地址不是很友好,有些时候速度很慢或大的资源下载很容易出错,这样会造成安装过程各种类型报错而无法安装。建议在下载完成后,对下载资源做校验和验证(NI一般会提供MD5或SHA256等),与官方或视觉论坛提供的校验和对比,一致就可以安装,如果不一致,则需要重新下载。视觉论坛早期下载的资源,那时候NI没有这么多限制,基本上都是正常下载的资源;后期下载的资源,都与NI的正确校验和对比过,保证是正确的资源才上传到百度网盘,所以百度网盘的资源基本上是正确的。校验和工具下载地址:
文件Hash计算器FHash,文件校验和验证下载文件正确性验证,MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算
http://pcmv.cn/thread-26524-1-1.html
NI-Industrial Communications for Ethernet/IP 1.3 Win32/64Eng NI以太网/IP 工业通信软件1.3下载
NI-Industrial Communications for Ethernet/IP
NI-Industrial Communications for Ethernet/IP使LabVIEW系统能够作为以太网/IP网络上的以太网/IP Class 1适配器设备进行通信。
NI-Industrial Communications for Ethernet/IP是一款应用软件,为您使用CompactRIO控制器、CompactRIO单板控制器、PXI控制器、紧凑型视觉系统、智能相机、工业控制器或独立CompactDAQ系统提供了所需的支持。它包含丰富的LabVIEW VI和属性库,助您快速为兼容的以太网/IP硬件设备创建自定义的以太网/IP应用程序。该软件具有显式消息传递和I/O数据通信机制。这些机制提供与各种可编程逻辑控制器(PLC)和以太网/IP I/O设备的通信和数据共享。
1.3
文件大小: 165382432 字节 (157.72 MB)
修改日期: 2013-08-06 02:47
MD5: ef619c701770119e63db42c9b00287ee
SHA1: 9d9e80590fec21e0b46e0274eb0ab950978e8e1b
SHA256: 9d21396529207b01293aa5ad9a188bf0f837a10a0f813bd10dd3180852253e9b
CRC32: 033e8ec0
百度网盘和NI官方下载地址:
NI-Industrial Communications for Ethernet/IP 1.3 Win32/64Eng NI以太网/IP 工业通信软件1.3下载
http://pcmv.cn/thread-25558-1-1.html?fromuid=9
(出处: 视觉论坛VISIONBBS|视觉之家VISIONHOME)
NI-Industrial Communications for EtherNet/IP 1.3 Readme
Overview
New Features and ChangesEtherNet/IP 1.3
Added support for NI cRIO-9068
Added support for LabVIEW 2013 32-bit and 64-bit
EtherNet/IP 1.2.1
Added support for NI License Manager
Added support for LabVIEW 2012 32-bit and 64-bit
(Bug ID 336355) Resolved a problem that EtherNet/IP can not be included in the installer created using Application Builder
EtherNet/IP 1.2
Added support for LabVIEW 64-bit
Added support for LabVIEW 2011
(Bug ID 307085) Resolved a stability issue seen only in LabVIEW RT 2009
(Bug ID 305672) Resolved a problem that ethernetIPInterface.dll is not exported when building an EIP Windows application
EtherNet/IP 1.1
First official release to support EtherNet/IP
Added example VIs to show how to use the VI APIs for creating EtherNet/IP applications
Added more LabVIEW error codes to better diagnose problems
System RequirementsSupported Hardware
Desktop PCs
NI PXI controllers
NI CompactRIO
NI Single-Board RIO
NI Industrial Controllers
NI Smart Cameras
NI Compact Vision System
NI Embedded Vision System
Software Requirements
LabVIEW 2010, LabVIEW 2011, LabVIEW 2012, or LabVIEW 2013
If you want to run the NI-Industrial Communications for EtherNet/IP software on the NI real-time hardware platforms, you should also install the LabVIEW Real-Time Module of the same version as the LabVIEW you installed.
Installation Instructions
Insert the NI-Industrial Communications for EtherNet/IP software CD into your CD-ROM drive. The installer launches if your CD-ROM drive plays data CDs automatically. If the installer does not launch automatically, navigate to the CD using Windows Explorer and launch the autorun.exe file from your NI-Industrial Communications for EtherNet/IP software CD.
The installation wizard guides you through the necessary steps to install the NI-Industrial Communications for EtherNet/IP software. You can go back and change values where appropriate by clicking the Back button. You can exit the setup where appropriate by clicking Cancel.
When the installation is complete, click Finish.
Installing the Software on a Real-Time Target
Expand Remote Systems in the configuration tree and expand your real-time target.
Select the Software category. Click the Add/Remove Software icon on the toolbar to launch the LabVIEW Real-Time Software Wizard.
If the real-time target is a CompactRIO controller, select Custom software installation.
Select NI-IndCom for EtherNet/IP from the feature list and click Next.
Follow the remaining installation instructions until installation is complete.
NI-Industrial Communications for EtherNet/IP Updates and Notifications
Accessing the Help
Finding Examples
Automating the Installation of NI Products
For more information on silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.
For more information on silent installations of suited NI products, such as NI Developer Suite, refer to KB 4GGGDQH0, Automating the Installation of a Suited Installer.
To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My National Instruments Installer?.
Finding All Programs
NI-Industrial Communications for EtherNet/IP Drops Support for Microsoft Windows Vista, Windows XP, and Windows Server 2003 in 2016
Product | Info Code |
NI LabVIEW | lifecycle |
NI LabWindows™/CVI™ | cvi_lifecycle |
NI Measurement Studio | mstudiolifecycle |
NI TestStand | tslcp |
NI DIAdem | ddlcp |
NI SignalExpress | selcp |
NI VeriStand | nivslifecycle |
Important Information
Notices are located in the <National Instruments>_Legal Information and <National Instruments> directories.
EULAs are located in the <National Instruments>SharedMDFLegallicense directory.
Review <National Instruments>_Legal Information.txt for information on including legal information in installers built with NI products.