石鑫华视觉 手机微信QQ:13450001061 / 18038383457

下载中心

LabVIEW Simnuation Interface Toolkit 2012 Win32Eng LabVIEW2012仿真接口工具包SIT2012下载

文章来源:石鑫华视觉网时间:2022-05-16 14:52:01 点击:257

Windows系统下(Linux和MAC系统下请自行了解清楚)NI的各种软件、模块、工具包、驱动程序,使用NI许可证管理器来激活的,绝大部分的都可以使用NI Lincense Activator来激活,以下链接可下载:
NI序列号Serial Number生成激活工具NI License Activator,LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本
http://pcmv.cn/thread-490-1-1.html

视觉论坛的各种资源,除了视觉相关的模块有使用外,大部分的都不会使用,所以仅提供资源不能提供技术支持。资源的下载地址一般会同时提供NI官方地址和百度网盘的下载地址。某些工具包NI的地址失效或没有NI的下载地址,那视觉论坛也没有办法,只能尝试使用百度网盘地址下载;如果百度网盘的下载地址失效过期,可联系论坛客服更新。现在NI的下载服务器对我国IP地址不是很友好,有些时候速度很慢或大的资源下载很容易出错,这样会造成安装过程各种类型报错而无法安装。建议在下载完成后,对下载资源做校验和验证(NI一般会提供MD5或SHA256等),与官方或视觉论坛提供的校验和对比,一致就可以安装,如果不一致,则需要重新下载。视觉论坛早期下载的资源,那时候NI没有这么多限制,基本上都是正常下载的资源;后期下载的资源,都与NI的正确校验和对比过,保证是正确的资源才上传到百度网盘,所以百度网盘的资源基本上是正确的。校验和工具下载地址:
文件Hash计算器FHash,文件校验和验证下载文件正确性验证,MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算
http://pcmv.cn/thread-26524-1-1.html

LabVIEW Simnuation Interface Toolkit 2012 Win32Eng LabVIEW2012仿真接口工具包SIT2012下载

2012
文件大小: 201374344 字节 (192.05 MB)
修改日期: 2012-08-07 05:33
MD5: 8470dd45b0a840cb81ac16dc439a0e04(重复一致,可秒传)
SHA1: 359201d0dbb5dfe37039ac3dc5363cdd433f54bf
SHA256: 3474849eb078ec04c25fdaac214cbce109f4da3e15793731c5383f4622aa2fe6
CRC32: 720fc7e2

百度网盘和NI官方下载地址:

LabVIEW Simnuation Interface Toolkit 2012 Win32Eng LabVIEW2012仿真接口工具包SIT2012下载

http://pcmv.cn/thread-25516-1-1.html?fromuid=9

(出处: 视觉论坛VISIONBBS|视觉之家VISIONHOME)



LabVIEW 2012 Simulation Interface Toolkit Readme

Version 2012.0.0
June 2012
This file contains the following information about the LabVIEW Simulation Interface Toolkit.
Overview
Supported Operating Systems
System Requirements
Installation Instructions
Upgrading from SIT 2.0.x/3.0.x/4.0/5.0.x/2009/2010/2011
What's New in 2012
Support for Real-Time Targets
Accessing the Help and Examples
Development Tips
Known Issues
Automating the Installation of NI Products

Overview

The NI LabVIEW Simulation Interface Toolkit gives control system design and test engineers a link between the NI LabVIEW graphical development environment and The MathWorks, Inc. Simulink® application software. With the LabVIEW Simulation Interface Toolkit, you can easily build custom LabVIEW user interfaces to view and control your simulation model at run time. This toolkit also provides a plug-in for use with The MathWorks, Inc. Real-Time Workshop® (Simulink Coder®), so you can use LabVIEW to connect your model developed in the Simulink environment to the real world through a variety of real-time I/O platforms (requires the LabVIEW Real-Time Module). With these capabilities, you can easily take your models from software verification to real-world prototyping and hardware-in-the-loop simulation.

Supported Operating Systems

You can run the LabVIEW Simulation Interface Toolkit installer on the following operating systems:
  • Windows 7 (32-bit and 64-bit)

  • Windows Vista (32-bit and 64-bit)

  • Windows XP SP2 (32-bit)

  • Windows Server 2003 R2 (32-bit)

  • Windows Server 2008 R2 (64-bit)

Note  The LabVIEW Simulation Interface Toolkit runs as a 32-bit application on all operating systems.
The LabVIEW Simulation Interface Toolkit does not support Windows 2000/NT/Me/98/95, Windows XP x64, or the Windows Server non-R2 editions.
Refer to the LabVIEW readme for additional system requirements and supported operating systems for LabVIEW 2012.

System Requirements

In addition to the system requirements for the LabVIEW Development System, the LabVIEW 2012 Simulation Interface Toolkit has the following requirements:
  • LabVIEW 2012 Full or Professional Development System (32-bit)

To create a host VI for a previously-developed model, you need only LabVIEW installed. To develop your model, you also must be a properly licensed user of and have the following software installed on the host computer:
  • The MathWorks, Inc. MATLAB® software and The MathWorks, Inc. Simulink® application software release 13.x, 14.x, 2006a, 2006b, 2007a, 2007b, 2008a, 2008b, 2009a, 2009b, 2010a, 2010b, or 2011a

Note  The LabVIEW Simulation Interface Toolkit does not support 64-bit versions of the MATLAB application software.
To control an offline simulation using the LabVIEW 2012 Simulation Interface Toolkit, you must install LabVIEW 2012 Simulation Interface Toolkit in addition to the MATLAB application software and the Simulink application software.
To compile your model into a model DLL, you must install the following software:
  • The MathWorks, Inc. Real-Time Workshop® software release 13.x, 14.x, 2006a, 2006b, 2007a, 2007b, 2008a, 2008b, 2009a, 2009b, 2010a, 2010b, or 2011a

  • Microsoft Visual C++ 6.0, .NET 2003, 2005 (Professional or Express), or 2008 (Professional or Express)

To control a simulation with a model in DLL form (Real-Time Target or Driver VI on Localhost), you must be a properly licensed user of and have the following software installed on both the host computer and the real-time target.
  • National Instruments LabVIEW 2012 Real-Time Module for ETS Targets.

  • (Optional) National Instruments LabVIEW 2012 FPGA Module, to create customized FPGA bitfiles used in real-time simulations involving NI FPGA devices.

  • You also must install the following driver software versions, depending on the type of hardware you want to use.

    National Instruments HardwareDriver Software Version Required
    National Instruments FPGA DevicesNI-RIO™ 4.0 or later
    National Instruments CAN InterfacesNI-CAN™ 2.7.3 or later
    National Instruments DAQ DevicesNI-DAQmx™ 9.3.5 or later


Installation Instructions

You can install all of your LabVIEW products—including the LabVIEW 2012 Simulation Interface Toolkit—using the LabVIEW 2012 Platform DVDs. Refer to the LabVIEW Installation Guide on the LabVIEW Platform DVD 1 for installation instructions and system requirements.
To request additional LabVIEW 2012 Platform DVDs, refer to the National Instruments Web site at ni.com.
Note If you purchased this product with an NI Software Suite or NI Product Bundle, use the installation media that shipped with your purchase to install this product.

Upgrading from SIT 2.0.x/3.0.x/4.0/5.0.x/2009/2010/2011

  • Load a host VI saved in SIT 3.0.x/4.0 and launch the SIT Connection Manager dialog box. Click the OK button to apply new settings. The conversion process preserves control/indicator mappings and all block diagram code. You will lose changes to SIT 3.0.x driver VI, but SIT 5.0.1 maintains hardware mappings. If the path to your model is invalid, SIT 5.0.1 prompts you to specify a valid path.

  • SIT 3.0.x driver VIs are not supported in SIT 5.0.1. If you are not using the SIT Connection Manager you will need to manually upgrade the driver VI. Refer to one of the examples for the correct driver VI structure.

  • SIT 5.0.1 does not convert driver VIs that SIT 2.0.x generated. Use the SIT Connection Manager dialog box to build a new driver VI for use in real-time simulations.

  • SIT 5.0.1 does not convert host VIs that SIT 2.0 generated.

  • The Simulation Interface Toolkit 4.0 deprecated the following VIs: SIT Execute Task and SIT Synchronize Base Rate.

  • The Simulation Interface Toolkit 5.0.1 relies heavily upon the SIT Connection Manager dialog box. National Instruments recommends you use this dialog box to create host VIs and driver VIs.

  • When running a simulation in Simulation Environment, the SignalProbe blocks from SIT 3.0.x/4.0 do not recognize tuneable variables specified through Data Objects. To be able to tune variables specified as tuneable through Data Objects, you must delete and re-add the SignalProbe block.

  • Update any custom FPGA bitfiles and VIs you developed in SIT 3.0.x/4.0 to the new FPGA VI template and recompile them.

  • SIT Write Log Settings to Configuration File.vi and SIT Write Playback Settings to Configuration File.vi in the User API have a new required input for Model Path.

  • The Simulation Interface Toolkit 5.0/5.0.1/2009/2010/2011 VIs can be used in LabVIEW 2012 Simulation Interface Toolkit without any modification.

  • The LabVIEW 2012 Simulation Interface Toolkit supports the 2011a software release of The Mathworks, Inc. MATLAB®, Simulink®, Real-Time Workshop®, and Stateflow® software.

What's New in 2012

The LabVIEW 2012 Simulation Interface Toolkit includes the following new features:
  • Updated Support for The MathWorks, Inc. Software

Support for Real-Time Targets

The LabVIEW Simulation Interface Toolkit supports running a simulation on the following types of National Instruments RT Series Hardware:
  • PXI

    • Any PXI-RT controller

  • FieldPoint

    • Any Compact FieldPoint controller

  • CompactRIO

    • Any CompactRIO controller is supported. A default bitfile is provided for the cRIO-9103 with NI 9215, NI 9263, NI 9411 and NI 9474 I/O modules. If you are using a different controller or a different set of I/O modules, you can use LabVIEW FPGA module to compile a custom bitfile.

    • You can use the Single Point Timed I/O Timing Engine in the FPGA Wizard to help create the FPGA VI for use with SIT. FPGA VIs created by the FPGA Wizard can only be used when there is only one HW timed device in the system. If you are using more than one HW timed device (e.g. two R-series boards in a PXI chassis) you need to use the template provided with SIT.

    • If you are using a VxWorks-based controller refer to the X:SimulationInterfaceToolkit1VxWorks eadme_sit_vxworks.txt file for information about enabling VxWorks support, where X is the drive where you installed the Simulation Interface Toolkit.

    • National Instruments recommends that you do not install the Scan Engine if you are using the CompactRIO controller with Simulation Interface Toolkit.

The LabVIEW 2012 Simulation Interface Toolkit ships with FPGA VIs for the following FPGA devices:
  • NI PCI-7811R

  • NI PXI-7811R

  • NI PCI-7813R

  • NI PXI-7813R

  • NI PCI-7831R

  • NI PXI-7831R

  • NI PCI-7833R

  • NI PXI-7833R

  • NI PXI-7841R

  • NI PXI-7842R

  • NI PXI-7851R

  • NI PXI-7852R

  • NI cRIO-9103

Accessing the Help and Examples

The LabVIEW Help contains conceptual, how-to, and reference information about the Simulation Interface Toolkit. Complete the following steps to access this help file.
  • Launch LabVIEW.

  • Select Help»LabVIEW Help to launch the LabVIEW Help.

  • Click the Contents tab.

  • Navigate to the Toolkits»Simulation Interface top-level topic.

The LabVIEW Simulation Interface Toolkit examples are located in the labviewexamplesSimulation Interface directory.

Development Tips

  • Driver VIs running on NI FPGA devices use the hardware settings for channel measurements.

  • In order to use the example .mdl files, that are included with SIT, when the execution host is set to driver VI on local or real-time, you first must compile the model into a DLL using Simulink®.

Known Issues

You can access the software and documentation known issues list online. Refer to the National Instruments Web site for an up-to-date list of known issues in the LabVIEW Simulation Interface Toolkit.

Automating the Installation of NI Products

You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes. However, starting with the August 2012 releases (products using NI Installers version 3.1 or later), you may need to perform additional steps before or during a silent installation of NI software.
If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software.
For more information, refer to the following KnowledgeBase articles:
  • For more information on silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.

  • For more information on silent installations of suited NI products, such as NI Developer Suite, refer to KB 4GGGDQH0, Automating the Installation of a Suited Installer.

  • To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My National Instruments Installer?.


Important Information

Copyright
© 2002–2012 National Instruments. All rights reserved.
Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
End-User License Agreements and Third-Party Legal Notices
You can find end-user license agreements (EULAs) and third-party legal notices in the following locations:
  • Notices are located in the <National Instruments>_Legal Information and <National Instruments> directories.

  • EULAs are located in the <National Instruments>SharedMDFEULAs directory.

  • Review <National Instruments>_Legal Information.txt for information on including legal information in installers built with NI products.

Trademarks
CompactRIO, FieldPoint, LabVIEW, National Instruments, NI, ni.com, the National Instruments corporate logo, and the Eagle logo are trademarks of National Instruments Corporation. Refer to the Trademark Information at ni.com/trademarks for other National Instruments trademarks. Refer to the Terms of Use section on ni.com/legal for more information about National Instruments trademarks.
MATLAB®, Real-Time Workshop®, Stateflow®, and Simulink® are registered trademarks of The MathWorks, Inc.
Other product and company names are trademarks or trade names of their respective companies.
Only Licensed Use is Permitted
You are only permitted to use this product in accordance with the accompanying license agreement. All rights not expressly granted to you in the license agreement accompanying the product are reserved to NI. Further, and without limiting the forgoing, no license or any right of any kind (whether by express license, implied license, the doctrine of exhaustion or otherwise) is granted under any NI patents or other intellectual property right of NI with respect to any other product(s) of NI or of anyone else (including without limitation, the MATLAB, Simulink and/or the Real-Time Workshop software of The MathWorks, Inc.), including without limitation, the right to use any of these other products.
Patents


For patents covering the National Instruments products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.


首页
84162741QQ
联系