Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活，以下链接可下载：
NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本
http://pcmv.cn/thread-490-1-1.html
视觉论坛的各种资源，除了视觉相关的模块有使用外，大部分的都不会使用，所以仅提供资源不能提供技术支持。资源的下载地址一般会同时提供NI官方地址和百度网盘的下载地址。某些工具包NI的地址失效或没有NI的下载地址，那视觉论坛也没有办法，只能尝试使用百度网盘地址下载；如果百度网盘的下载地址失效过期，可联系论坛客服更新。现在NI的下载服务器对我国IP地址不是很友好，有些时候速度很慢或大的资源下载很容易出错，这样会造成安装过程各种类型报错而无法安装。建议在下载完成后，对下载资源做校验和验证（NI一般会提供MD5或SHA256等），与官方或视觉论坛提供的校验和对比，一致就可以安装，如果不一致，则需要重新下载。视觉论坛早期下载的资源，那时候NI没有这么多限制，基本上都是正常下载的资源；后期下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘，所以百度网盘的资源基本上是正确的。校验和工具下载地址：
文件Hash计算器FHash,文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算
http://pcmv.cn/thread-26524-1-1.html
NI-Industrial Communications for EtherCAT 19.0 Win32/64Eng 以太网控制自动化技术工业通信软件19.0版下载
NI-Industrial Communications for EtherCAT
NI-Industrial Communications for EtherCAT提供了EtherCAT主站支持，以支持NI控制器硬件上的确定性I/O。
NI-Industrial Communications for EtherCAT为用户使用CompactRIO控制器、PXI控制器或工业控制器提供支持。使用此软件，您可以通过使用基于EtherCAT总线的CompactRIO机箱或使用远程I/O硬件来扩展I/O。NI建议结合经过充分测试和验证的NI EtherCAT产品使用此驱动软件。
19.0
文件大小: 543117312 字节 (517.96 MB)
修改日期: 2019-06-26 13:01
MD5: 072ce7051fb48554fc85b98bd13f4e90
SHA1: a93d3055a45a3ae195876a5874def935ed55ad0b
SHA256: f9fe38e6cc0c927d4f0fccf56d3f4a6824cae27444036d158e9ef0a086c81c90
CRC32: c54a5830
百度网盘和NI官方下载地址：
NI-Industrial Communications for EtherCAT 19.0 Win32/64Eng 以太网控制自动化技术工业通信软件19.0版下载
http://pcmv.cn/thread-25591-1-1.html?fromuid=9
(出处: 视觉论坛VISIONBBS|视觉之家VISIONHOME)
NI-Industrial Communications for EtherCAT® 19.0 Readme
June 2019
This file contains important information about the NI-Industrial Communications for EtherCAT software, including installation instructions, new features, and known issues.
Overview
Supported Operating Systems
Installation Instructions
Product Security and Critical Updates
New Features
Supported EtherCAT Masters
Known Issues
Accessing the Help
Finding Examples
Automating the Installation of NI Products
Using NI Software with Microsoft Windows 10
Using NI Software with Microsoft Windows 8.1
NI-Industrial Communications for EtherCAT Drops Support for Windows 7 (32- and 64-Bit), Windows Server 2008 R2, and All 32-Bit Windows Operating Systems in 2021
Legal Information
Overview
The NI-Industrial Communications for EtherCAT software provides an EtherCAT master driver to support the real-time EtherCAT network operations. Use the software with the LabVIEW Real-Time Module to configure the EtherCAT network and map the EtherCAT device signals to the LabVIEW I/O variables.
Supported Operating Systems
The NI-Industrial Communications for EtherCAT supports the following operating systems:
1 NI software installs VC2015 Runtime and .NET 4.6.2. Windows 8.1 and Windows Server 2012 R2 require Microsoft updates to support these items. Refer to Microsoft KB2919442 and KB2919355 for more information about how to install these updates.
2 NI software is signed with a SHA-256 certificate. Windows 7 SP1, Windows Embedded Standard 7 SP1, and Windows Server 2008 R2 SP1 require Microsoft updates to support SHA-256. Refer to Microsoft KB3033929 for more information about how to install this security update.
Note Refer to NI-Industrial Communications for EtherCAT Drops Support for Windows 7 (32- and 64-Bit), Windows Server 2008 R2, and All 32-Bit Windows Operating Systems in 2021 for information about future OS support.
Note In 2016 NI-Industrial Communications for EtherCAT dropped support for Windows Vista, Windows XP, Windows Server 2003, and installations of Windows 7 without any service packs. NI-Industrial Communications for EtherCAT 19.0 will not install or run on an unsupported OS. You cannot deploy or distribute applications that use NI-Industrial Communications for EtherCAT 19.0 to an unsupported OS. Additionally, after installing NI-Industrial Communications for EtherCAT 19.0, you cannot use any installers built on this computer with any version of LabVIEW, LabWindows™/CVI™, NI TestStand™, or Measurement Studio on an unsupported OS.
For more information about the changes to our OS support for 2016, refer to Why Does My NI ADE Installer Fail on Windows XP/Vista and Windows Server 2003?.
Note Support for Windows 32-bit operating systems may require disabling physical address extension (PAE). To learn how this might affect your system and what actions you might need to take, visit ni.com/info and enter the Info Code PAESupport.
Software Requirements
To install the NI-Industrial Communications for EtherCAT software, install the following prerequisite software.
Refer to the LabVIEW Readme for additional system requirements and supported operating systems for LabVIEW.
Notes NI 9144 and NI 9145 are the only EtherCAT slaves that have FPGA support in LabVIEW. To use the NI 9144/9145 in FPGA Mode, install the LabVIEW 2014 FPGA Module or later on the host computer and then download a bitfile to the FPGA of the NI 9144/9145. You can compile or copy a bitfile to download to the FPGA. NI 951x Series drive interface modules require the LabVIEW 2014 SoftMotion Module or later to work for EtherCAT.
|
Installation Instructions
NI automates software installation using NI Package Manager. Visit ni.com/info and enter the Info Code NIPMDownload to download NI Package Manager. Refer to the NI Package Manager Manual for more information about installing, removing, and upgrading NI software using NI Package Manager.
Note Refer to NI-Industrial Communications for EtherCAT® Installation Guide to learn how to install the NI-Industrial Communications for EtherCAT software on the real-time controller. This manual is available at ni.com/manuals and in printed-format shipped with the NI-Industrial Communications for EtherCAT software.
Product Security and Critical Updates
Visit ni.com/security to view and subscribe to receive security notifications about NI products. Visit ni.com/critical-updates for information about critical updates from NI.
New Features and ChangesVersion 19.0
Added support for LabVIEW 2019.
Added support for PXI controllers with NI Linux Real-Time—PXIe-8840 Quad-Core, PXIe-8861, and PXIe-8880. This support no longer relies on VeriStand.
Version 18.5
Added support for LabVIEW 2018 SP1.
For VeriStand, added support for PXI controllers with NI Linux Real-Time—PXIe-8840 Quad-Core and PXIe-8880.
Version 18.0
Added support for LabVIEW 2018.
Added support for cRIO-905x.
Added support for new C Series modules—NI 9210/9224/9228.
Dropped support for the C Series module—NI 9233.
Version 17.6
Version 17.0
Version 16.1
Version 16.0
Added support for LabVIEW 2016.
Added support for cRIO-9032/9035 (Sync)/9037/9039 (Sync).
Added support for new C Series modules—NI 9209/9216/9226/9344/9436.
Added support for IC-3171/3172/3173.
Added support for Remote I/O. Remote I/O is a modular I/O system for measurement, machine control, and industrial automation. NI provides Remote I/O API for communicating with Remote I/O devices in an EtherCAT environment.
Version 15.0
Added support for LabVIEW 2015.
Added support for new C Series modules—NI 9220/9222/9223/9242/9244/9437.
Added support for sbRIO-9607/9627.
Version 14.5
Version 14.0
Version 2.7
Version 2.6
Version 2.5
Version 2.4
Version 2.3
Fixed a latency issue caused by using fiber-optic converters in an EtherCAT network.
Added support for third-party C Series modules in the NI 9144 FPGA mode.
Added support for using Remote Programmatic API with the LabVIEW Run-Time Engine.
Extended the maximum scan period to 1 second.
Version 2.2
Added support for cable redundancy.
Added support for Modular Device Profiles.
Added support for cRIO-908x.
Version 2.1
Version 2.0
Added support for Programmatic Configuration.
Added support for synchronization among multiple NI EtherCAT masters.
Added support for PXIe-8133 and RT desktop target.
Added support for NI 9214 C Series Module.
Version 1.2
Added support for cRIO-9023, NI 9792, and EVS-146x Series.
Added support for new C Series modules.
Version 1.1
Added LabVIEW FPGA Module support for the NI 9144.
Added support for Industrial Controllers and cRIO-9024.
Added support for new C Series modules, including the NI 951x Motion modules.
Version 1.0.2
Version 1.0.1
Version 1.0
Supported EtherCAT Masters
The following table lists the supported EtherCAT masters and the earliest supported version of the NI-Industrial Communications for EtherCAT.
EtherCAT Master | Earliest Supported Version |
| cRIO-9074 | 1.0 |
| PXI-8106 | 1.0 |
| PXIe-8130 | 1.0 |
| PXI-8104 | 1.0 |
| PXI-8183 | 1.0 |
| PXI-8145 | 1.0 |
| cRIO-9022 | 1.01 |
| PXI-8108 | 1.01 |
| cRIO-9024 | 1.1 |
| NI 3100 | 1.1 |
| NI 3110 | 1.1 |
| cRIO-9023 | 1.2 |
| cRIO-9025 | 1.2 |
| NI 9792 | 1.2 |
| EVS 1463RT | 1.2 |
| EVS 1464RT | 1.2 |
| All real-time embedded PXI controllers with the PXI-8231 or PXI-8232 Ethernet interface | 2.0 |
| PXIe-8133 | 2.0 |
| PCI-8232 | 2.0 |
| PCIe-8231 | 2.0 |
| PCIe-8233 | 2.0 |
| PCIe-8235 | 2.0 |
| cRIO-9081 | 2.2 |
| cRIO-9082 | 2.2 |
| RMC-8354RT | 2.5 |
| RMC-8355RT | 2.5 |
| PXI-8109 | 2.5 |
| PXI-8115 | 2.5 |
| PXIe-8115 | 2.5 |
| PXIe-8135 | 2.5 |
| cRIO-9068 | 2.6 |
| cRIO-9030 | 14.0 |
| cRIO-9031 | 14.0 |
| cRIO-9033 | 14.0 |
| cRIO-9067 | 14.0 |
| sbRIO-9651 | 14.0 |
| cDAQ-9132RT | 14.0 |
| cDAQ-9134RT | 14.0 |
| cDAQ-9139RT | 14.0 |
| PXI-8840 | 14.0 |
| PXIe-8840 | 14.0 |
| CVS-1457RT | 14.0 |
| PXI-8119 | 14.0 |
| PXIe-8119 | 14.0 |
| PXIe-8880 | 14.0 |
| cRIO-9034 | 14.5 |
| cRIO-9035 | 14.5 |
| cRIO-9036 | 14.5 |
| cRIO-9038 | 14.5 |
| cRIO-9039 | 14.5 |
| cRIO-9064 | 14.5 |
| cRIO-9065 | 14.5 |
| cDAQ-9133RT | 14.5 |
| cDAQ-9135RT | 14.5 |
| sbRIO-9607 | 15.0 |
| sbRIO-9627 | 15.0 |
| cDAQ-9136RT | 15.0 |
| cDAQ-9137RT | 15.0 |
| CVS-1458RT | 15.0 |
| cRIO-9032 | 16.0 |
| cRIO-9037 | 16.0 |
| cRIO-9035 (Sync) | 16.0 |
| cRIO-9039 (Sync) | 16.0 |
| IC-3171 | 16.0 |
| IC-3172 | 16.0 |
| IC-3173 | 16.0 |
| cRIO-904x | 17.6 |
| cRIO-905x | 18.0 |
| PXIe-8840 Quad-Core with NI Linux Real-Time | 18.5 |
| PXIe-8880 with NI Linux Real-Time | 18.5 |
| PXIe-8861 with NI Linux Real-Time | 19.0 |
Note NI does not recommend using cDAQ real-time controllers with the NI 9144/9145 EtherCAT slave device in FPGA mode, because cDAQ real-time controllers cannot read user-defined variables from the NI 9144/9145 EtherCAT slave device. When using a cDAQ real-time controller as the master device, you can only read EtherCAT device signals from the LabVIEW I/O Variable Functions. You cannot read directly from the LabVIEW I/O variables.
Note If you use NI Measurement & Automation Explorer (MAX) to install the NI-Industrial Communications for EtherCAT software on real-time controllers, some controllers, such as the Embedded Vision System, require you to install the controller driver software. Otherwise, MAX cannot discover the controllers.
Note In NI-Industrial Communications for EtherCAT 18.5, PXIe-8840 Quad-Core with NI Linux Real-Time and PXIe-8880 with NI Linux Real-Time are supported only for VeriStand. In NI-Industrial Communications for EtherCAT 19.0 or later, this support no longer relies on VeriStand.
Note NI-Industrial Communications for EtherCAT 19.0 supports only the built-in and non-primary Ethernet ports of PXI controllers with NI Linux Real-Time.
Known Issues
You can access the software and documentation known issues list online. Refer to the NI website for an up-to-date list of known issues in the NI-Industrial Communications for EtherCAT software.
Accessing the Help
Refer to the NI-Industrial Communications for EtherCAT® Help, available by selecting Help»NI-Industrial Communications for EtherCAT from LabVIEW, for information about the NI-Industrial Communications for EtherCAT software.
Finding Examples
Select Help»Find Examples from LabVIEW to launch the NI Example Finder. Navigate to the Hardware Input and Output»NI-Industrial Communications»EtherCAT folder to access the examples.
You can also find the examples for NI-Industrial Communications for EtherCAT® in the labviewexamplesindcomecat folder.
Automating the Installation of NI Products
You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes.
If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software.
For more information about automating the installation of NI products, refer to the following KnowledgeBase articles:
For more information about silent installations of individual NI products, refer to Customize and Automate Installation of a Single Installer.
For more information about silent installations of NI products in a suite, such as NI Software Platform Bundle, refer to Customize and Automate Installation of a Suited Installer.
To determine what version of NI Installers your product contains, refer to Determine Type and Version of My National Instruments Installer.
Using NI Software with Microsoft Windows 10
Microsoft Windows 10 is the latest version of the Windows operating system and features significant changes compared to previous versions. Windows 10 introduces several new capabilities and also combines features from both Windows 7 and Windows 8. For more information about NI support for Windows 10, visit ni.com/windows10.
Using NI Software with Microsoft Windows 8.1
When you install NI software on Microsoft Windows 8.1, you will notice a few additional tiles in the Apps view, including shortcuts to NI application software products such as NI LabVIEW, NI Measurement & Automation Explorer (MAX), and NI Launcher. For more information about NI support for Windows 8.1, visit ni.com/windows8.
NI-Industrial Communications for EtherCAT Drops Support for Windows 7 (32- and 64-Bit), Windows Server 2008 R2, and All 32-Bit Windows Operating Systems in 2021
NI-Industrial Communications for EtherCAT will drop support for Windows 7 (32- and 64-bit), Windows Server 2008 R2, and all 32-bit Windows operating systems starting in 2021. Versions of this product that ship after May 1, 2021, will not install or run on these operating systems. For detailed information about NI operating system support, visit ni.com/r/win32bitsupport.
For detailed information about NI application software product life cycles, visit ni.com/info and enter one of the following Info Codes:
Product | Info Code |
| LabVIEW | lifecycle |
| LabWindows/CVI | cvi_lifecycle |
| Measurement Studio | mstudiolifecycle |
| TestStand | tslcp |
| DIAdem | ddlcp |
| SignalExpress | selcp |
| VeriStand | nivslifecycle |
Legal Information
Copyright
© 2008–2019 National Instruments. All rights reserved.
Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
NI respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
End-User License Agreements and Third-Party Legal Notices
You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:
Notices are located in the <National Instruments>_Legal Information and <National Instruments> directories.
EULAs are located in the <National Instruments>SharedMDFLegallicense directory.
Review <National Instruments>_Legal Information.txt for information on including legal information in installers built with NI products.
U.S. Government Restricted Rights
If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.
IVI Foundation Copyright Notice
Content from the IVI specifications reproduced with permission from the IVI Foundation.
The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
Trademarks
Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on NI trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.
Patents
For patents covering the NI products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the NI Patent Notice at ni.com/patents.
Credits
This product includes components that use the Expat XML Parser. In regards to the Expat XML Parser, the following notice applies:
Copyright © 1998, 1999, 2000 Thai Open Source Software Center Ltd and Clark Cooper. Copyright © 2001, 2002, 2003, 2004, 2005, 2006 Expat maintainers.
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
374786L-01
