Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活，以下链接可下载：
NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本
http://pcmv.cn/thread-490-1-1.html
视觉论坛的各种资源，除了视觉相关的模块有使用外，大部分的都不会使用，所以仅提供资源不能提供技术支持。资源的下载地址一般会同时提供NI官方地址和百度网盘的下载地址。某些工具包NI的地址失效或没有NI的下载地址，那视觉论坛也没有办法，只能尝试使用百度网盘地址下载；如果百度网盘的下载地址失效过期，可联系论坛客服更新。现在NI的下载服务器对我国IP地址不是很友好，有些时候速度很慢或大的资源下载很容易出错，这样会造成安装过程各种类型报错而无法安装。建议在下载完成后，对下载资源做校验和验证（NI一般会提供MD5或SHA256等），与官方或视觉论坛提供的校验和对比，一致就可以安装，如果不一致，则需要重新下载。视觉论坛早期下载的资源，那时候NI没有这么多限制，基本上都是正常下载的资源；后期下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘，所以百度网盘的资源基本上是正确的。校验和工具下载地址：
文件Hash计算器FHash,文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算
http://pcmv.cn/thread-26524-1-1.html
NI-Industrial Communications for EtherCAT 14.5 Win32/64Eng 以太网控制自动化技术工业通信软件14.5版下载
NI-Industrial Communications for EtherCAT
NI-Industrial Communications for EtherCAT提供了EtherCAT主站支持，以支持NI控制器硬件上的确定性I/O。
NI-Industrial Communications for EtherCAT为用户使用CompactRIO控制器、PXI控制器或工业控制器提供支持。使用此软件，您可以通过使用基于EtherCAT总线的CompactRIO机箱或使用远程I/O硬件来扩展I/O。NI建议结合经过充分测试和验证的NI EtherCAT产品使用此驱动软件。
14.5
文件大小: 324798752 字节 (309.75 MB)
修改日期: 2015-02-25 04:10
MD5: 985556f2a5fbed7b4d1325b205cde6bb
SHA1: 7216a2c009dec5cb413507f4a423487710d40f83
SHA256: c9147aa6cf64588ed351e059fd341f3427bc506a1b4402bc54d88ae6e91d4213
CRC32: d9d162a7
百度网盘和NI官方下载地址：
NI-Industrial Communications for EtherCAT 14.5 Win32/64Eng 以太网控制自动化技术工业通信软件14.5版下载
http://pcmv.cn/thread-25583-1-1.html?fromuid=9
(出处: 视觉论坛VISIONBBS|视觉之家VISIONHOME)
NI-Industrial Communications for EtherCAT® 14.5 Readme
January 2015
This file contains important information about the NI-Industrial Communications for EtherCAT software, including installation instructions, new features, a partial list of bug fixes, and known issues.
Overview
System Requirements
Installation Instructions
Product Security and Critical Updates
New Features
Supported Hardware
Driver Version Naming Changes
Accessing the Help
Finding Examples
Known Issues
Bug Fixes
Automating the Installation of NI Products
How to Use NI Software with Microsoft Windows 8.x
NI Software Support for Microsoft Windows Vista, Windows XP, and Windows Server 2003
Legal Information
Overview
The NI-Industrial Communications for EtherCAT software provides an EtherCAT master driver to support the real-time EtherCAT network operations. Use the software with the LabVIEW Real-Time Module to configure the EtherCAT network and map the EtherCAT device signals to the LabVIEW I/O variables.
System Requirements
NI-Industrial Communications for EtherCAT 14.5 supports the following operating systems.
Windows 8.1/8.0/7/Vista (32-bit and 64-bit)
Windows XP SP3 (32-bit)
Windows Server 2012 R2 (64-bit)
Windows Server 2008 R2 (64-bit)
Windows Server 2003 R2 (32-bit)
Note NI-Industrial Communications for EtherCAT supports only R2 editions of Windows Server.
Software Requirements
To install the NI-Industrial Communications for EtherCAT software, install the following prerequisite software.
Refer to the LabVIEW Readme for additional system requirements and supported operating systems for LabVIEW.
Notes NI 9144 is the only EtherCAT slave that has FPGA support in LabVIEW. To use the NI 9144 in FPGA Mode, install the LabVIEW 2011 FPGA Module or later on the host computer and then download a bitfile to the FPGA of the NI 9144. You can compile or copy a bitfile to download to the FPGA. NI 951x Series drive interface modules require the LabVIEW 2011 NI SoftMotion Module or later to work for EtherCAT.
|
Installation Instructions
Before installing the NI-Industrial Communications for EtherCAT software, log on as Administrator or as a user with Administrator privileges. The NI-Industrial Communications for EtherCAT software setup program must have Administrator privileges because the program modifies the configuration registry of your system. Complete the following steps to install the NI-Industrial Communications for EtherCAT software on the host computer.
Insert the NI-Industrial Communications for EtherCAT software media into a drive. The installer launches if the drive plays media automatically. If the installer does not launch automatically, navigate to the media using Windows Explorer and launch the autorun.exe file from your NI-Industrial Communications for EtherCAT software media.
The installation wizard guides you through the necessary steps to install the NI-Industrial Communications for EtherCAT software. You can go back and change values where appropriate by clicking the Back button. You can exit the setup where appropriate by clicking the Cancel button.
When the installation is complete, click the Finish button.
Note After installing the NI-Industrial Communications for EtherCAT software on the host computer, if you want to use the software on a real-time controller, refer to NI-Industrial Communications for EtherCAT® Installation Guide to learn how to install the NI-Industrial Communications for EtherCAT software on the real-time controller. This manual is available in PDF-format in the NI-Industrial Communications for EtherCAT media or in printed-format shipped with the media.
Product Security and Critical Updates
Visit ni.com/security to view and subscribe to receive security notifications about National Instruments products. Visit ni.com/critical-updates for information about critical updates from National Instruments.
New FeaturesVersion 14.5
Added support for LabVIEW 2014 SP1.
Added support for new CompactRIO real-time controllers. Refer to the Supported Hardware section for a list of real-time controllers that each version of the NI-Industrial Communications for EtherCAT software supports.
Version 14.0
Version 2.7
Version 2.6
Version 2.5
Version 2.4
Version 2.3
Fixed a latency issue caused by using fiberoptic converters in an EtherCAT network.
Added support for third-party C series modules in the NI 9144 FPGA mode.
Added support for using Remote Programmatic API with the LabVIEW Run-Time Engine.
Extended the maximum scan period to 1 second.
Version 2.2
Added support for cable redundancy.
Added support for Modular Device Profiles.
Added support for cRIO-908x.
Version 2.1
Version 2.0
Added support for Programmatic Configuration.
Added support for synchronization among multiple NI EtherCAT masters.
Added support for PXIe-8133 and Real-Time Desktop target.
Added support for NI 9214 C Series Module.
Version 1.2
Added support for cRIO-9023, NI 9792, and EVS-146x Series.
Added support for new C series modules.
Version 1.1
Added LabVIEW FPGA Module support for the NI 9144.
Added support for Industrial Controller and cRIO-9024.
Added support for new C series modules, including the NI 951x Motion modules.
Version 1.0.2
Version 1.0.1
Version 1.0
Supported Hardware
Refer to Supported Hardware for NI-Industrial Communications for EtherCAT for the latest information about the hardware that the NI-Industrial Communications for EtherCAT software supports.
Driver Version Naming Changes
NI-Industrial Communications for EtherCAT versions are now aligned with the versions of major NI application software products. This alignment gives you information about the year the driver was released and the most recent software version the driver was designed to work with. Driver versions now start with a two-digit year indicator: <;ProductName><Year-BasedVersion>. For example, NI-Industrial Communications for EtherCAT 14.0 is the version released with LabVIEW 2014. The last version released under the old numbering scheme is NI-Industrial Communications for EtherCAT 2.7. The first version released under the new numbering scheme is NI-Industrial Communications for EtherCAT 14.0.
Accessing the Help
Refer to the NI-Industrial Communications for EtherCAT® Help, available by selecting Help»NI-Industrial Communications for EtherCAT from LabVIEW, for information about using the NI-Industrial Communications for EtherCAT software.
Finding Examples
LabVIEW examples for the NI-Industrial Communications for EtherCAT software are in the labviewexamplesindcomecat folder. You can modify an example VI to fit an application or copy an example and paste the example to a VI you create.
Known Issues
You can access the software and documentation known issues list online. Refer to the National Instruments website for an up-to-date list of known issues in the NI-Industrial Communications for EtherCAT software.
Bug Fixes
The following items are the ID and title of a subset of issues fixed in the NI-Industrial Communications for EtherCAT software. This is not an exhaustive list of issues fixed in the current version of the NI-Industrial Communications for EtherCAT software. If you have a CAR ID, you can search this list to validate that the issue has been fixed.
| ID | Fixed Issue |
| 477512 | Correct the calibration parameters for NI 9235/9236 |
Automating the Installation of NI Products
You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes. However, starting with the August 2012 releases (products using NI Installers version 3.1 or later), you may need to perform additional steps before or during a silent installation of NI software.
If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software.
For more information about automating the installation of NI products, refer to the following KnowledgeBase articles:
For more information about silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.
For more information about silent installations of NI products in a suite, such as NI Developer Suite, refer to KB 4GGGDQH0, How Do I Automate the Installation of a Suited Installer?.
To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My National Instruments Installer?.
How to Use NI Software with Microsoft Windows 8.x
When you install National Instruments software on Microsoft Windows 8.x, you will notice a few additional tiles in the Apps view, including shortcuts to NI application software products such as NI LabVIEW, Measurement & Automation Explorer (NI MAX), and NI Launcher.
Using NI Launcher
NI Launcher helps you find and launch installed NI products. It provides you with a method of finding NI products similar to the Start menu in previous versions of Microsoft Windows. To use NI Launcher, click the NI Launcher tile in the Apps view. NI Launcher launches the desktop and opens a menu containing a list of NI products. Click any NI product to launch it.
| Note NI MAX does not appear as a desktop shortcut when installed on Microsoft Windows 8.x. You can launch NI MAX either from the Apps view or from within NI Launcher. |
Pinning Frequently Used Applications
For convenience, you can pin your most-used NI applications, such as MAX, to either the Start screen or the Taskbar on the desktop, as necessary:
| Current Application | Icon Location | Pin to Action |
| Windows 8.x Desktop | Desktop Taskbar | Right-click application and select Pin to Taskbar |
| Windows 8.x Desktop | Start screen | Right-click application and select Pin to Start |
| Windows 8.x Start screen | Desktop Taskbar | Right-click application and select Pin to taskbar from the menu bar on the bottom of the screen |
Finding All Programs
If you want to find a particular application or related files, such as documentation files, from the Start screen, you can access all installed files from the Apps view. To get to the Apps view, right-click anywhere on the Start screen and select All apps (Windows 8.0) or click the down arrow on the bottom left of the screen (Windows 8.1).
For more information about NI support for Windows 8.x, visit ni.com/windows8.
NI-Industrial Communications for EtherCAT Drops Support for Microsoft Windows Vista, Windows XP, and Windows Server 2003 in 2016
NI-Industrial Communications for EtherCAT will drop support for Microsoft Windows Vista, Windows XP, and Windows Server 2003 as of July 1, 2016. Versions of NI-Industrial Communications for EtherCAT that ship after July 1, 2016 will not install or run on Windows Vista, Windows XP, or Windows Server 2003. For detailed information about NI application software product life cycles, visit ni.com/info and enter one of the following Info Codes:
| Product | Info Code |
| NI LabVIEW | lifecycle |
| NI LabWindows™/CVI™ | cvi_lifecycle |
| NI Measurement Studio | mstudiolifecycle |
| NI TestStand | tslcp |
| NI DIAdem | ddlcp |
| NI SignalExpress | selcp |
| NI VeriStand | nivslifecycle |
Legal Information
Copyright
© 2008–2015 National Instruments. All rights reserved.
Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
End-User License Agreements and Third-Party Legal Notices
You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:
Notices are located in the <National Instruments>_Legal Information and <National Instruments> directories.
EULAs are located in the <National Instruments>SharedMDFLegallicense directory.
Review <National Instruments>_Legal Information.txt for information on including legal information in installers built with NI products.
U.S. Government Restricted Rights
If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.
IVI Foundation Copyright Notice
Content from the IVI specifications reproduced with permission from the IVI Foundation.
The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
Trademarks
Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on National Instruments trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.
Patents
For patents covering the National Instruments products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.
Credits
This product includes components that use the Expat XML Parser. In regards to the Expat XML Parser, the following notice applies:
Copyright © 1998, 1999, 2000 Thai Open Source Software Center Ltd and Clark Cooper. Copyright © 2001, 2002, 2003, 2004, 2005, 2006 Expat maintainers.
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
374786B-01
