Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活，以下链接可下载：
NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本
http://pcmv.cn/thread-490-1-1.html
视觉论坛的各种资源，除了视觉相关的模块有使用外，大部分的都不会使用，所以仅提供资源不能提供技术支持。资源的下载地址一般会同时提供NI官方地址和百度网盘的下载地址。某些工具包NI的地址失效或没有NI的下载地址，那视觉论坛也没有办法，只能尝试使用百度网盘地址下载；如果百度网盘的下载地址失效过期，可联系论坛客服更新。现在NI的下载服务器对我国IP地址不是很友好，有些时候速度很慢或大的资源下载很容易出错，这样会造成安装过程各种类型报错而无法安装。建议在下载完成后，对下载资源做校验和验证（NI一般会提供MD5或SHA256等），与官方或视觉论坛提供的校验和对比，一致就可以安装，如果不一致，则需要重新下载。视觉论坛早期下载的资源，那时候NI没有这么多限制，基本上都是正常下载的资源；后期下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘，所以百度网盘的资源基本上是正确的。校验和工具下载地址：
文件Hash计算器FHash,文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算
http://pcmv.cn/thread-26524-1-1.html
NI CompactRIO 16.1.1 Patch Download Windows32 English/Janpnese/Chinese设备驱动程序补丁下载NICRIO2017April
NI CompactRIO
NI CompactRIO支持CompactRIO控制器、CompactRIO机箱和CompactRIO单板控制器。
NI CompactRIO是一个驱动软件，用于支持CompactRIO系统的识别、编程和部署。除LabVIEW之外，您还必须安装此驱动程序以及LabVIEW Real-Time模块和/或LabVIEW FPGA模块才能开始编程硬件。
16.1.1Patch（官方叫16.0Patch，针对CRIO16.0版本升级，请先安装CRIO16.0）
文件大小: 59415433 字节 (56.66 MB)
修改日期: 2019-06-25 03:01
MD5: 51c3af0148e1bfd8aa62294cac74d11d（官方正确）
SHA1: 6b1b1d0883a3a6a2238eba997e71faac62368887
SHA256: 35fac2289086cee511b1e4d96fc0070475f45998d1567ed422d50bc6af0d6099
CRC32: 47e88773
NI CompactRIO 16.1.1 Patch Download Windows32 English/Janpnese/Chinese设备驱动程序补丁下载NICRIO2017April
http://pcmv.cn/thread-25254-1-1.html?fromuid=9
(出处: 视觉论坛VISIONBBS|视觉之家VISIONHOME)
NI CompactRIO Device Drivers August 2016 Readme
August 2016
This document contains the following important information about NI CompactRIO Device Drivers August 2016:
Installing NI CompactRIO Device Drivers August 2016
What's New in NI CompactRIO Device Drivers August 2016
Preserving Device Aliases when Upgrading Software
Bug Fixes
Known Issues
Accessing the Help
Supported Platforms
NI CompactRIO Device Drivers August 2016 Drops Support for Microsoft Windows 7 RTM, Windows Vista, Windows XP, and Windows Server 2003
Supported Hardware and Software
Product Security and Critical Updates
Automating the Installation of NI Products
Using NI Software with Microsoft Windows 10
Using NI Software with Microsoft Windows 8.1
Legal Information
Installing NI CompactRIO Device Drivers August 2016
Note This installation requires at least 2 GB of RAM in addition to the requirements for LabVIEW, the LabVIEW Real-Time Module, and the LabVIEW FPGA Module.
Complete the following steps to install NI CompactRIO Device Drivers August 2016 for use with LabVIEW.
Install one of the following supported versions of LabVIEW:
LabVIEW 2016
LabVIEW 2015 SP1
LabVIEW 2014 SP1
LabVIEW 2013 SP1
Install the LabVIEW Real-Time Module.
Install the LabVIEW FPGA Module.
Install NI CompactRIO Device Drivers August 2016.
↑ Back to Top
What's New in NI CompactRIO Device Drivers August 2016
Software support for the following new CompactRIO controllers:
cRIO-9035 (Sync)
cRIO-9039 (Sync)
Scan Interface mode support for the following existing C Series modules:
Support for the NI ELVIS RIO Control Module (NI ELVIS RIO CM)
↑ Back to Top
Preserving Device Aliases when Upgrading Software
Ensure that you back up any aliases for local RIO devices before you upgrade the software on your system, or ensure that the devices remain connected to the system during the upgrade. Any local aliases that are not associated with a connected device might be removed during the upgrade.
↑ Back to Top
Bug Fixes
Refer to the List of Known Issues and Bug Fixes for NI-RIO Device Drivers on ni.com for a list of bug fixes in this release.
↑ Back to Top
Known Issues
Refer to the List of Known Issues and Bug Fixes for NI-RIO Device Drivers on ni.com for a current list of all known issues in this release.
↑ Back to Top
Accessing the Help
In the LabVIEW Help, click the Contents tab and select NI CompactRIO Device Drivers to access the software help for your NI CompactRIO device.
↑ Back to Top
Supported Platforms
Use the following Microsoft Windows operating systems and service packs with NI CompactRIO Device Drivers August 2016.
| Operating System | 64-bit | 32-bit | Comments |
| Windows 10 | ✓ | ✓ | Refer to the Using NI Software with Microsoft Windows 10 section of this document for more information about using NI CompactRIO Device Drivers on Windows 10. |
| Windows 8.11 | ✓ | ✓ | Refer to the Using NI Software with Microsoft Windows 8.1 section of this document for more information about using NI CompactRIO Device Drivers on Windows 8.1. |
| Windows 7 Professional SP12 | ✓ | ✓ | — |
| Windows Server 2012 R21 | ✓ | — | — |
| Windows Server 2008 R2 SP12 | ✓ | — | — |
Notes:
1 NI software installs VC2015 Runtime and .NET Framework 4.6.1. Windows 8.1 and Windows Server 2012 R2 require Microsoft updates to support these items. Refer to Microsoft KB2919442 and KB2919355 for more information about how to install these updates.
2 NI software is signed with a SHA-256 certificate. Windows 7 SP1 and Windows Server 2008 R2 SP1 require Microsoft updates to support SHA-256. Refer to Microsoft KB3033929 for more information about how to install this security update. |
↑ Back to Top
NI CompactRIO Device Drivers August 2016 Drops Support for Microsoft Windows 7 RTM, Windows Vista, Windows XP, and Windows Server 2003
NI CompactRIO Device Drivers August 2016 drops support for Microsoft Windows 7 RTM (with no service pack), Windows Vista, Windows XP, and Windows Server 2003. NI CompactRIO Device Drivers August 2016 and later will not install or run on an unsupported OS. You cannot deploy or distribute applications that use NI CompactRIO Device Drivers August 2016 to an unsupported OS. Additionally, after installing NI CompactRIO Device Drivers August 2016, you cannot use any installers built on this computer with any version of LabVIEW, LabWindows™/CVI™, NI TestStand™, or Measurement Studio on an unsupported OS.
For more information about the changes to our OS support for 2016, refer to KB 79UC78LS, Why Does my LabVIEW, LabWindows/CVI, Measurement Studio, or TestStand Built Installer Fail on Windows XP/Vista and Server 2003?.
↑ Back to Top
Supported Hardware and Software
Refer to the Software Support for CompactRIO, CompactDAQ, Single-Board RIO, R Series, FlexRIO, and EtherCAT support document on ni.com for a complete list of the hardware and LabVIEW software versions supported by each version of NI CompactRIO.
Visit to ni.com/compactrio for additional NI CompactRIO product support and information.
↑ Back to Top
Product Security and Critical Updates
Visit ni.com/security to view and subscribe to receive security notifications about NI products. Visit ni.com/critical-updates for information about critical updates from NI.
↑ Back to Top
Automating the Installation of NI Products
You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes. However, starting with the August 2012 releases (products using NI Installers version 3.1 or later), you may need to perform additional steps before or during a silent installation of NI software.
If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software.
For more information about automating the installation of NI products, refer to the following KnowledgeBase articles:
For more information about silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.
For more information about silent installations of NI products in a suite, such as NI Developer Suite, refer to KB 4GGGDQH0, How Do I Automate the Installation of a Suited Installer?.
To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My NI Installer?.
↑ Back to Top
Using NI Software with Microsoft Windows 10
Microsoft Windows 10 is the latest version of the Windows operating system and features significant changes compared to previous versions. Windows 10 introduces several new capabilities and also combines features from both Windows 7 and Windows 8. For more information about NI support for Windows 10, visit ni.com/windows10.
↑ Back to Top
Using NI Software with Microsoft Windows 8.1
When you install NI software on Microsoft Windows 8.1, you will notice a few additional tiles in the Apps view, including shortcuts to NI application software products such as NI LabVIEW, Measurement & Automation Explorer (NI MAX), and NI Launcher.
Using NI Launcher
NI Launcher helps you find and launch installed NI products. It provides you with a method of finding NI products similar to the Start menu in previous versions of Microsoft Windows. To use NI Launcher, click the NI Launcher tile in the Apps view. NI Launcher launches the desktop and opens a menu containing a list of NI products. Click any NI product to launch it.
Note NI MAX does not appear as a desktop shortcut when installed on Microsoft Windows 8.1. You can launch NI MAX either from the Apps view or from within NI Launcher.
Pinning Frequently Used Applications
For convenience, you can pin your most-used NI applications, such as MAX, to either the Start screen or the Taskbar on the desktop, as necessary:
| Current Application | Icon Location | Pin to Action |
| Windows 8.1 Desktop | Desktop Taskbar | Right-click application and select Pin to Taskbar |
| Windows 8.1 Desktop | Start screen | Right-click application and select Pin to Start |
| Windows 8.1 Start screen | Desktop Taskbar | Right-click application and select Pin to taskbar from the menu bar on the bottom of the screen |
Finding All Programs
If you want to find a particular application or related files, such as documentation files, from the Start screen, you can access all installed files from the Apps view. To get to the Apps view, right-click anywhere on the Start screen and select All apps (Windows 8.0) or click the down arrow on the bottom left of the screen (Windows 8.1).
For more information about NI support for Windows 8.1, visit ni.com/windows8.
↑ Back to Top
Legal Information
Copyright
© 2004–2016 National Instruments. All rights reserved.
Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
NI respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
End-User License Agreements and Third-Party Legal Notices
You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:
Notices are located in the <National Instruments>_Legal Information and <National Instruments> directories.
EULAs are located in the <National Instruments>SharedMDFLegallicense directory.
Review <National Instruments>_Legal Information.txt for information on including legal information in installers built with NI products.
U.S. Government Restricted Rights
If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 for military agencies.
IVI Foundation Copyright Notice
Content from the IVI specifications reproduced with permission from the IVI Foundation.
The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
Trademarks
Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on NI trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.
Patents
For patents covering the NI products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the NI Patent Notice at ni.com/patents.
375022D-01
