Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活，以下链接可下载：
NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本
http://pcmv.cn/thread-490-1-1.html
视觉论坛的各种资源，除了视觉相关的模块有使用外，大部分的都不会使用，所以仅提供资源不能提供技术支持。资源的下载地址一般会同时提供NI官方地址和百度网盘的下载地址。某些工具包NI的地址失效或没有NI的下载地址，那视觉论坛也没有办法，只能尝试使用百度网盘地址下载；如果百度网盘的下载地址失效过期，可联系论坛客服更新。现在NI的下载服务器对我国IP地址不是很友好，有些时候速度很慢或大的资源下载很容易出错，这样会造成安装过程各种类型报错而无法安装。建议在下载完成后，对下载资源做校验和验证（NI一般会提供MD5或SHA256等），与官方或视觉论坛提供的校验和对比，一致就可以安装，如果不一致，则需要重新下载。视觉论坛早期下载的资源，那时候NI没有这么多限制，基本上都是正常下载的资源；后期下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘，所以百度网盘的资源基本上是正确的。校验和工具下载地址：
文件Hash计算器FHash,文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算
http://pcmv.cn/thread-26524-1-1.html
NI-XNET 21.0.1 Driver Download Win10x64 Eng/Ger/Jpn NI-XNET仪器驱动程序21.0.1下载
NI-XNET
NI-XNET为配置、开发和调试应用程序提供支持，适用于汽车以太网、CAN、LIN和FlexRay网络的原型验证、仿真和测试。
NI-XNET是一个NI仪器驱动程序，具有一组易用的常见功能，用于读写PXI、PCI、NI CompactDAQ和NI CompactRIO等不同平台的汽车以太网、CANI、LIN和FlexRay帧和信号。NI-XNET CAN、LIN和FlexRay接口经优化，适合需要对数百个CAN帧和信号进行高速实时操作的应用，如硬件在环仿真、快速控制原型、总线监控和自动化控制等。
从NI-XNET 21.0版本开始，仅支持64位的Win10/WinServer 2016/WinServer 2019系统，但是仍然支持64位系统下的32位LabVIEW。
NI-XNET 21.0.1
发布日期
2021/8/30
包含的版本
21.0.1完整版
受支持的操作系统
Windows 10 64-bit
Windows Server 2016 64-bit
Windows Server 2019 64-bit
应用程序位数
32/64位
语言
德语，日语，英文
校验和
文件大小: 1867157504 字节 (1.74 GB)
修改日期: 2021-08-30 16:15
MD5: a5c441735ac01f96f0f91fedcc5b9583
SHA1: 363fbfdbde498e68a8a0f7f18a4773175d11ec6c
SHA256: fe151d39b6e1258701b2b9baed50009fe5cb6caaf18b057e9396d4c7d496ddb2
CRC32: afca741b
百度网盘与NI官方下载地址：
注册登陆视觉论坛，购买附件查看下载地址
NI-XNET 21.0.1 Driver Download Win10x64 Eng/Ger/Jpn NI-XNET仪器驱动程序21.0.1下载
http://pcmv.cn/thread-27561-1-1.html?fromuid=9
(出处: 视觉论坛VISIONBBS|视觉之家VISIONHOME)
NI-XNET 21.0.1 Readme
August 2021
This file contains installation instructions and compatibility information for NI-XNET.
You can find more release information on ni.com.
NI-XNET Release Notes: Known issues, bugs fixed since the last release, and other notes about this release
NI-XNET Manuals: New features, behavior changes, and other documentation
If you plan to use LabVIEW NXG, refer to LabVIEW NXG Support and Considerations.
Overview
Supported Operating Systems
Application Software Support
Installation Instructions
Product Security and Critical Updates
New Features
Supported Hardware
Accessing the Help
Finding Examples
LabVIEW NXG Support and Considerations
Automating the Installation of NI Products
Using NI Software with Microsoft Windows 10
Unsupported Windows Operating Systems
NI Software Drops Support for Phar Lap ETS Real-Time Operating System in 2022
Legal Information
Overview
NI-XNET 21.0.1 patches the NI-XNET 21.0 release, resolving an issue in which support for PXIe-8623 was unintentionally missing.
NI-XNET is an NI instrument driver that features a common set of easy-to-use functions for reading and writing Automotive Ethernet, CAN, LIN, and FlexRay data on many different platforms including USB, PXI, PCI, NI CompactDAQ, and NI CompactRIO.
Supported Operating Systems
NI-XNET 21.0 supports the following operating systems:
Note Refer to Unsupported Windows Operating Systems for more information about support for Microsoft Windows OSes.
Note NI-XNET 21.0 will not install or run on an unsupported OS. You cannot deploy or distribute applications that use NI-XNET 21.0 to an unsupported OS. Additionally, after installing NI-XNET 21.0, you cannot use any installers built on this computer with any version of LabVIEW, LabWindows™/CVI™, NI TestStand™, or Measurement Studio on an unsupported OS.
Application Software Support
NI-XNET 21.0 supports the following application software versions, including service packs. If you are not using NI application software, refer to Microsoft Visual Studio Support.
Application Software | Versions Supported by NI-XNET |
| LabVIEW | 2018 SP1, 2019 SP1, 2020 SP1, and 2021 |
| LabVIEW Real-Time (RT) | 2018, 2019, 2020, and 2021 |
| LabVIEW NXG | 5.0, 5.1 |
| LabWindows™/CVI™ | 2017 and later |
Microsoft Visual Studio Support
If you are using the NI-XNET .NET Class Library, .NET Framework 4.0 (minimum) is required. The NI-XNET .NET Class Library can be used with Visual C# or Visual Basic .NET in any Visual Studio version that can target .NET Framework 4.0 or .NET Framework 4.5.
To use the .NET API, you must install the .NET class libraries or the .NET wrapper in addition to the NI device driver. For information about versions of the .NET Framework and the drivers each supports, as well as the download location of the installer files, refer to .NET Resources for NI Hardware and Software.
Installation Instructions
Download the NI-XNET installer from ni.com/downloads. NI software includes NI Package Manager to handle the installation. Refer to the NI Package Manager Manual for more information about installing, removing, and upgrading NI software using NI Package Manager.
Product Security and Critical Updates
Visit ni.com/security to view and subscribe to receive security notifications about NI products. For information about critical updates from NI, refer to Available Critical and Security Updates for NI Software.
New Features
Added support for LabVIEW 2021.
Added support for LabVIEW NXG 5.1.
Added sleep/wake capability based on OPEN Alliance TC10 Sleep/Wake 2.0 specification. (This feature is currently supported only on the PXIe-8523 Automotive Ethernet module.)
Added new property, Interface:Ethernet:Output Stream Timescale, which enables an XNET Stream Session to output individual Ethernet frames at specified times.
Added new property, Session:Interface:Ethernet:Signal Quality, to indicate signal quality of an NI Automotive Ethernet interface.
Added support to create FlexRay timing sources for Linux RT.
Added support for PXIe-8623.
Replaced the NI-XNET Database Editor with new version (previously NI-XNET Database Editor Preview).
Supported Hardware
The following list details the hardware models supported in NI-XNET 21.0.
USB-8501 Low-Speed/Fault Tolerant USB CAN Interface Device
USB-8502 High-Speed/FD USB CAN Interface Device
USB-8506 USB LIN Interface Device
PCI-8511 Low‑Speed/Fault-Tolerant CAN Interface Device
PCI-8512 High‑Speed/FD CAN Interface Device
PCI-8513 Software‑Selectable/FD CAN Interface Device
PCI-8516 PCI LIN Interface Device
PCI-8517 FlexRay Interface Device
PCIe-8510 PCIe Vehicle Multi-Protocol Interface Device
PXI-8511 Low-Speed/Fault Tolerant PXI CAN Interface Module
PXI-8512 High-Speed, Flexible Data Rate PXI CAN Interface Module
PXI-8513 Software-Selectable PXI CAN Interface Module
PXI-8516 PXI LIN Interface Module
PXI-8517 PXI FlexRay Interface Module
PXIe-8510 PXI Vehicle Multiprotocol Interface Module
PXIe-8521 100BASE-T1 PXI Automotive Ethernet Interface Module
PXIe-8522 1000BASE-T1 PXI Automotive Ethernet Interface Module
PXIe-8523 100/1000BASE-T1 PXI Automotive Ethernet Interface Module
PXIe-8623 100BASE-TX/1000BASE-T PXI Automotive Ethernet Interface Module
TRC-8542 CAN HS/FD Transceiver Cable
TRC-8543 CAN HS/FD or LS/FT Transceiver Cable
TRC-8546 LIN Transceiver Cable
C Series modules:
NI 9860 C Series Vehicle Multiprotocol Interface Module
NI 9861 Low-Speed/Fault Tolerant C Series CAN Interface Module
NI 9862 High-Speed, Flexible Data Rate C Series CAN Interface Module
NI 9866 C Series LIN Interface Module
Supported platforms for XNET C Series modules:
CompactDAQ—NI-DAQmx 17.1 (or later) is required for:
USB Chassis: cDAQ-9171, cDAQ-9174, cDAQ-9178, and cDAQ-9179
Ethernet Chassis: cDAQ-9181, cDAQ-9184, and cDAQ-9188
Wireless Chassis: cDAQ-9191
cDAQ Controller: cDAQ-9138 (Windows only) and cDAQ-9139 (Windows only)
cDAQ Controller: cDAQ-9132 (Windows and RT) and cDAQ-9134 (Windows and RT)
cDAQ Controller: cDAQ-9133 (Windows and RT) and cDAQ-9135 (Windows and RT)
cDAQ Controller: cDAQ-9136 (Windows and RT) and cDAQ-9137 (Windows and RT)
Ethernet Chassis: cDAQ-9185 and cDAQ-9189
CompactRIO—CompactRIO 20.0 (or later) and LabVIEW 2017 (or later) are required for the following targets:
Integrated CompactRIO Real-Time Controller: cRIO-906x, and cRIO-903x
Single-Board RIO: sbRIO-9627, sbRIO-9607
CompactRIO Real-Time Controller: cRIO-9032, cRIO-9037
CompactRIO Real-Time Controller: cRIO-9035 (Sync), cRIO-9039 (Sync)
When using a cRIO-903x or cRIO-906x, a bit stream is not needed with NI 986x modules in the project
When using a cRIO-903x, cRIO-906x, or sbRIO-96x7, installation in the "Other" programming environment is not supported
CompactRIO Real-Time Controller: cRIO-9040, cRIO-9042, cRIO-9043, cRIO-9045, cRIO-9046, cRIO-9047, cRIO-9048, and cRIO-9049
When using a cRIO-904x, NI 986x modules will only be usable in Real-Time mode, and no bit stream is necessary
CompactRIO—CompactRIO 20.0 (or later) and LabVIEW 2018 (or later) are required for the following targets:
CompactRIO Real-Time Controller: cRIO-9053, cRIO-9054, cRIO-9056, and cRIO-9057
When using a cRIO-905x, NI 986x modules will only be usable in Real-Time mode, and no bit stream is necessary
CompactRIO—CompactRIO 20.0 (or later) and LabVIEW 2019 (or later) are required for the following targets:
Single-Board RIO: sbRIO-9603, sbRIO-9608, sbRIO-9609, sbRIO-9628, sbRIO-9629, sbRIO-9638
When using an sbRIO-9603, sbRIO-9608, sbRIO-9609, sbRIO-9628, sbRIO-9629, or sbRIO-9638, NI 986x modules will only be usable in Real-Time mode, and no bit stream is necessary
Note NI-XNET software supports only NI Automotive Ethernet, CAN, FlexRay, and LIN hardware products. For information about software for CAN products from other vendors, refer to the documentation you received with those products.
Accessing the Help
Refer to NI-XNET Help, accessible from the Help menu in LabVIEW, for information about NI-XNET.
Finding Examples
Select Help»Find Examples from LabVIEW to launch the NI Example Finder.
You can find Automotive Ethernet, CAN, FlexRay, and LIN examples under Hardware Input and Output in the Example Finder.
LabVIEW examples for NI-XNET are located in the National InstrumentsLabVIEWexamples
ixnet directory. You can modify an example VI to fit an application, or you can copy and paste from one or more examples into a VI that you create.
LabVIEW NXG Support and Considerations
The following sections detail considerations for using LabVIEW NXG with NI-XNET 21.0.
LabVIEW NXG Operating Systems and System Requirements
Software support for LabVIEW NXG differs in the following ways:
LabVIEW NXG Help
View context help in LabVIEW by pressing <Ctrl-H> and hovering over an object.
Search for items using the search bar in the upper right corner of the LabVIEW window. You can also view context help for the search results.
Additional documentation is available online at ni.com/manuals.
LabVIEW NXG Examples
Launch LabVIEW and click the Learning tab.
LabVIEW lessons are located in the Lessons tab, and LabVIEW Examples are located in the Examples tab. Follow the instructions in the lessons and examples.
Automating the Installation of NI Products
You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes.
If the NI product you are installing uses Microsoft .NET 4.6.2, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.6.2 separately before you install NI software.
For more information about automating the installation of NI products, refer to Automating an Installer in the NI Package Manager manual.
Using NI Software with Microsoft Windows 10
Microsoft Windows 10 is the latest version of the Windows operating system and features significant changes compared to previous versions. Windows 10 introduces several new capabilities and also combines features from both Windows 7 and Windows 8. For more information about NI support for Windows 10, refer to NI Product Compatibility for Microsoft Windows 10.
Unsupported Windows Operating Systems
NI-XNET no longer supports Windows Vista/XP/7/8.x, Windows Server 2003/2008/2012, or any 32-bit Windows operating system. Versions of this product that ship after May 1, 2021, may not install or execute correctly on these operating systems. For detailed information about NI operating system support, visit
https://www.ni.com/r/win32bitsupport.NI Software Drops Support for Phar Lap ETS Real-Time Operating System in 2022.
NI Software will drop support for Phar Lap ETS Real-Time Operating System starting in 2022. Versions of this product that ship after May 1, 2022, may not install or execute correctly on this operating system. For high-level information on the support roadmap for Phar Lap and its replacement, NI Linux Real-Time, visit ni.com/r/xf35k1. To find out what hardware is supported on PXI controllers running NI Linux Real-Time, visit ni.com/r/b7g5wi.
Legal Information
Copyright
© 2009–2021 National Instruments Corporation. All rights reserved.
Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
NI respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
End-User License Agreements and Third-Party Legal Notices
You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:
Notices are located in the <National Instruments>_Legal Information and <National Instruments> directories.
EULAs are located in the <National Instruments>SharedMDFLegallicense directory.
Review <National Instruments>_Legal Information.txt for information on including legal information in installers built with NI products.
U.S. Government Restricted Rights
If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.
IVI Foundation Copyright Notice
Content from the IVI specifications reproduced with permission from the IVI Foundation.
The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
Trademarks
Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on NI trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.
Patents
For patents covering the NI products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the NI Patent Notice at ni.com/patents.
374802AB-01
