石鑫华视觉 手机微信QQ:13450001061 / 18038383457

下载中心

NI-XNET 20.5 Driver Download Win32/64 Eng/Ger/Jpn NI-XNET仪器驱动程序20.5下载

文章来源:石鑫华视觉网时间:2022-05-10 14:29:20 点击:678

Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活，以下链接可下载：
NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本
http://pcmv.cn/thread-490-1-1.html

视觉论坛的各种资源，除了视觉相关的模块有使用外，大部分的都不会使用，所以仅提供资源不能提供技术支持。资源的下载地址一般会同时提供NI官方地址和百度网盘的下载地址。某些工具包NI的地址失效或没有NI的下载地址，那视觉论坛也没有办法，只能尝试使用百度网盘地址下载；如果百度网盘的下载地址失效过期，可联系论坛客服更新。现在NI的下载服务器对我国IP地址不是很友好，有些时候速度很慢或大的资源下载很容易出错，这样会造成安装过程各种类型报错而无法安装。建议在下载完成后，对下载资源做校验和验证（NI一般会提供MD5或SHA256等），与官方或视觉论坛提供的校验和对比，一致就可以安装，如果不一致，则需要重新下载。视觉论坛早期下载的资源，那时候NI没有这么多限制，基本上都是正常下载的资源；后期下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘，所以百度网盘的资源基本上是正确的。校验和工具下载地址：
文件Hash计算器FHash,文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算
http://pcmv.cn/thread-26524-1-1.html

NI-XNET 20.5 Driver Download Win32/64 Eng/Ger/Jpn NI-XNET仪器驱动程序20.5下载

NI-XNET
NI-XNET为配置、开发和调试应用程序提供支持，适用于汽车以太网、CAN、LIN和FlexRay网络的原型验证、仿真和测试。
NI-XNET是一个NI仪器驱动程序，具有一组易用的常见功能，用于读写PXI、PCI、NI CompactDAQ和NI CompactRIO等不同平台的汽车以太网、CANI、LIN和FlexRay帧和信号。NI-XNET CAN、LIN和FlexRay接口经优化，适合需要对数百个CAN帧和信号进行高速实时操作的应用，如硬件在环仿真、快速控制原型、总线监控和自动化控制等。

20.5
文件大小: 2320334848 字节 (2.16 GB)
修改日期: 2020-09-14 05:17
MD5: 04e131ad4f640d6a2d1e4748fb007881（官方正确）
SHA1: 7c46463453a4d0af2b26b46ee1a0ac741d360040
SHA256: 7ce254ffd18d0a47c093504971b27483ce769516dd71fa1c772e5341b9bccf6a
CRC32: 6a2f7753

NI-XNET 20.5 Driver Download Win32/64 Eng/Ger/Jpn NI-XNET仪器驱动程序20.5下载

http://pcmv.cn/thread-25185-1-1.html?fromuid=9

(出处: 视觉论坛VISIONBBS|视觉之家VISIONHOME)



NI-XNET 20.5 Readme

August 2020
This file contains important information about NI-XNET, including installation instructions and known issues.
Overview
Supported Operating Systems
Application Software Support
Installation Instructions
Product Security and Critical Updates
New Features and Changes
Supported Hardware
Known Issues
Bug Fixes
Additional Programming Topics
Automating the Installation of NI Products
Using NI Software with Microsoft Windows 10
Using NI Software with Microsoft Windows 8.1
LabVIEW NXG Support and Considerations
Legal Information

Overview

NI-XNET is an NI instrument driver that features a common set of easy-to-use functions for reading and writing Automotive Ethernet, CAN, LIN, and FlexRay data on many different platforms including USB, PXI, PCI, NI CompactDAQ, and NI CompactRIO.

Supported Operating Systems

NI-XNET supports the following operating systems:

  • Windows 10/8.11/7 SP12

  • Windows Embedded Standard 7 SP12

  • Windows Server 2016

  • Windows Server 2012 R21

  • Windows Server 2008 R2 SP12

Note  Support for Windows 32-bit operating systems may require disabling physical address extension (PAE). To learn how this might affect your system and what actions you might need to take, visit ni.com/r/paesupport.
1 NI software installs VC2015 Runtime and .NET 4.6.2. Windows 8.1 and Windows Server 2012 R2 require Microsoft updates to support these items. Refer to Microsoft KB2919442 and KB2919355 for more information about how to install these updates.
2 NI software is signed with a SHA-256 certificate. Windows 7 SP1, Windows Embedded Standard 7 SP1, and Windows Server 2008 R2 SP1 require Microsoft updates to support SHA-256. Refer to Microsoft KB3033929 for more information about how to install this security update.
The NI-XNET installer does not support Windows Server 2003/NT/Vista/XP/Me/2000/98/95 or the Windows Server non-R2 editions.
NI-XNET does not support guest accounts on Windows 7. You must log into an administrative or user account to use NI-XNET on these operating systems.
PXI Automotive Ethernet Interface Modules (PXIe-8521, PXIe-8522, and PXIe-8523) do not support the Phar Lap ETS real-time operating system that installs with the LabVIEW Real-Time Module.

NI-XNET Drops Support for Windows 7 (32- and 64-Bit), Windows Server 2008 R2, and All 32-Bit Windows Operating Systems in 2021

NI-XNET will drop support for Windows 7 (32- and 64-bit), Windows Server 2008 R2, and all 32-bit Windows operating systems starting in 2021. Versions of this product that ship after May 1, 2021, may not install or execute correctly on these operating systems. For detailed information about NI operating system support, visit ni.com/r/win32bitsupport.

NI Software Drops Support for Phar Lap ETS Real-Time Operating System in 2022

NI Software will drop support for Phar Lap ETS Real-Time Operating System starting in 2022. Versions of this product that ship after May 1, 2022, may not install or execute correctly on this operating system. For high-level information on the support roadmap for Phar Lap and its replacement, NI Linux Real-Time, please visit ni.com/r/xf35k1. To find out what hardware is supported on PXI controllers running NI Linux Real-Time, please visit ni.com/r/b7g5wi.

Application Software Support

The following table lists the application software versions supported by NI-XNET.
Application Software3
Versions Supported by NI-XNET 20.5
LabVIEW
2017, 2018, 2019, and 2020
LabVIEW Real-Time (RT)
2017, 2018, 2019, and 2020
LabVIEW NXG
5.0
LabWindows™/CVI™
2015 and later
3 Application software support for LabVIEW NXG is not included with NI-XNET and must be downloaded separately via NI Package Manager.

Microsoft Visual Studio Support

NI-XNET supports the following Microsoft Visual Studio versions and associated programming languages.
Programming Languages
Versions Supported by NI-XNET 20.5
Microsoft Visual C/C++
Visual Studio 2003 or later

Installation Instructions

NI installs NI-XNET using NI Package Manager. If you do not already have NI software installed, NI-XNET installs NI Package Manager to handle the installation of your NI software. Visit ni.com/r/NIPMDownload to download NI Package Manager. Refer to the NI Package Manager Manual for more information about installing, removing, and upgrading NI software using NI Package Manager.

Product Security and Critical Updates

Visit ni.com/security to view and subscribe to receive security notifications about NI products. Visit ni.com/critical-updates for information about critical updates from NI.

New Features and ChangesNew NI-XNET 20.5 Features and Changes as Compared to NI-XNET 20.1

The NI-XNET 20.5 release adds the following features:

  • Expanded the number of database sessions that can be opened at the same time from 7 to 63.

  • Added support to NI-XNET IP Stack for the IPv6 protocol.

  • Added support for NI-XNET Database Editor Preview, a new version of the existing Database Editor that offers improved user experience and supports modern automotive industry standards such as AUTOSAR. Use NI Package Manager to install the new editor, or download it from ni.com/r/xnetdbeditor.

New NI-XNET 20.1 Features and Changes as Compared to NI-XNET 20.0

The NI-XNET 20.1 release adds the following features:

  • Added NI-XNET IP Stack, which improves support for TCP/IP-based protocols using Automotive Ethernet modules. NI-XNET IP Stack supports the following protocols and features:

    • TCP, UDP

    • IPv4, ARP, ICMPv4, IGMP

    • Static and link-local IPv4 addressing

    • IEEE 802.1Q tagged and non-tagged virtual interfaces

    • Jumbo frames (gigabit Ethernet speeds only)

  • Added new logging property Ethernet:Logging:Error? to XNET Session Node.

The NI-XNET 20.1 release changes the following:

  • Extended the Interrupt Moderation property to support the PXIe-8521 Automotive Ethernet module.

  • Disabled the automatic import of all ARXML files contained within a folder. Instead, only the ARXML file specified by the user is imported.

New NI-XNET 20.0 Features and Changes as Compared to NI-XNET 19.6

The NI-XNET 20.0 release adds the following features:

  • Added support for LabVIEW NXG 5.0.

  • Added support for LabVIEW 2020.

  • Added a System Configuration API property, Interrupt Moderation, for PXIe-8522 and PXIe-8523 Automotive Ethernet modules that can improve system performance.

The NI-XNET 20.0 release changes the following:

  • Removed support for LabVIEW 2016.

  • Removed support for CVI 2013.

  • Removed support for cRIO-9022, cRIO-9023, cRIO-9024, cRIO-9025, cRIO-9081, and cRIO-9082 controllers.

  • Removed support for cRIO-9111, cRIO-9112, cRIO-9113, cRIO-9114, cRIO-9116, and cRIO-9118 chassis.

New NI-XNET 19.6 Features and Changes as Compared to NI-XNET 19.5

The NI-XNET 19.6 release adds the following features:

  • Added support for jumbo frames with the PXIe-8522 and PXIe-8523 Automotive Ethernet modules.

  • Added support for Ethernet Frame Filter property.

  • Added support for Automotive Ethernet modules to use Wireshark to monitor Ethernet frames in real-time. (Supported in Windows only and tested with Wireshark 3.0.6.)

New NI-XNET 19.5 Features and Changes as Compared to NI-XNET 19.1

The NI-XNET 19.5 release adds the following features:

  • Added support for LabVIEW NXG 4.0.

  • Added support for sbRIO-9603, sbRIO-9608, sbRIO-9609, sbRIO-9628, sbRIO-9629, and sbRIO-9638 chassis.

  • Added support for PXIe-8522 and PXIe-8523 Automotive Ethernet modules.

New NI-XNET 19.1 Features and Changes as Compared to NI-XNET 19.0

The NI-XNET 19.1 release adds the following features:

  • Added support for PXI controllers running NI Linux Real-Time for NI-XNET PCI, PXI, PCIe, PXIe, and C Series devices4.

  • Added support for network time synchronization with the PXIe-8521 while in Tap mode.

  • Added support for the PXIe-8521 in LabVIEW NXG 3.1.

4C Series devices are supported only when used in a supported CompactDAQ chassis.

New NI-XNET 19.0 Features and Changes as Compared to NI-XNET 18.5

The NI-XNET 19.0 release adds the following features:

  • Added support for LabVIEW 2019.

  • Added support for the PXIe-8521 4-port, 100BASE-T1 Automotive Ethernet Interface Module.

Note  The PXIe-8521 does not support LabVIEW Real-Time or LabVIEW NXG in NI-XNET 19.0.
The NI-XNET 19.0 release changes the following:

  • Extended the NI-XNET LabVIEW API to support Automotive Ethernet.

  • Removed support for LabVIEW 2015.

  • Removed support for NI-XNET C series modules in a cDAQ chassis when attached to a controller or host running Phar Lap. Support for other Operating Systems remains unaffected.

  • Removed support for cRIO-9012 and cRIO-9014 controllers. Note that these targets may still support installation, but they are no longer officially supported, and may be removed in a future release.

  • Changed behavior for Signal Input Waveform sessions to address defects.

  • Changed options for building LabVIEW or CVI application installers: "NI-XNET Runtime" installs only the NI-XNET Runtime, "NI-XNET Utilities" installs the NI-XNET Database Editor and Bus Monitor in addition to the NI-XNET Runtime.

New NI-XNET 18.5 Features and Changes as Compared to NI-XNET 18.0

The NI-XNET 18.5 release adds the following features:

  • Added support for LabVIEW NXG 3.0.

  • Added support for LabVIEW 2018 SP1.

  • Added support for the USB-8501 NI-XNET CAN LS/FT Interface.

  • Added support for importing CAN FD settings from FIBEX 4.1.2 databases.

  • Added support for J1939 session property, SAE J1939:Include Destination Address in PGN, in LabVIEW NXG.

The NI-XNET 18.5 release changes the following:

  • Lowered the default value for the nxPropSession_J1939ResponseTimeTrSD property from 0.05 s to 0 s to improve performance in handling multipacket messages.

  • Improved performance when opening large database files.

  • Removed support for LabVIEW NXG 2.0 and 2.1.

New NI-XNET 18.0 Features and Changes as Compared to NI-XNET 17.5.1

The NI-XNET 18.0 release adds the following features:

  • Added ability in SystemDesigner to discover XNET hardware ports and select new names for them. (LabVIEW NXG)

  • Added a new J1939 session property, SAE J1939:Include Destination Address in PGN. (C and LabVIEW 2018 only)

  • Added support for LabVIEW NXG 2.1.

  • Added support for LabVIEW 2018.

The NI-XNET 18.0 release changes the following:

  • Removed support for LabVIEW 2014.

New NI-XNET 17.5.1 Features and Changes as Compared to NI-XNET 17.5

The NI-XNET 17.5.1 release changes the following:

  • Bug Fix for cDAQ-9171 support.

New NI-XNET 17.5 Features and Changes as Compared to NI-XNET 17.0.1

The NI-XNET 17.5 release adds the following features:

  • Read LIN clusters from AUTOSAR 3.x and 4.x files.

    Notes  NI-XNET supports PDUs only if there is a 1:1 mapping between the PDU and frame layout. The import is limited to features supported by the NI-XNET driver.

    • Extract LIN frames and signals. The signal names are the names of the SYSTEM-SIGNAL instances.

    • Attach LIN frames to the ECUs as "Rx/Tx."

    • Extract LIN cluster specific information (e.g., schedules and configuration frames).

  • Added user accessible checksum values to NI-XNET LIN frames.

  • Added support for ISC-178X smart cameras.

  • Added support for signals larger than 52 bits in the API and the Database Editor.

    • Signals up to 64 bits can be read/written as double floating point (rounded).

    • Signals of any size can be read/written as byte strings using a conversion session.

New NI-XNET 17.0.1 Features and Changes as Compared to NI-XNET 17.0

The NI-XNET 17.0.1 release changes the following:

  • Bug Fix for LabVIEW 64-bit support.

New NI-XNET 17.0 Features and Changes as Compared to NI-XNET 16.1

The NI-XNET 17.0 release adds the following features:

  • Support for LabVIEW 2017.

  • Support for PCIe-8510.

  • Read CAN clusters from AUTOSAR 3.x and 4.x files.

    Notes  NI-XNET supports PDUs only if there is a 1:1 mapping between the PDU and frame layout. The import is limited to features supported by the NI-XNET driver.


    • Extract CAN frames and signals. The signal names are the names of the SYSTEM-SIGNAL instances.

    • Attach CAN frames to the ECUs as "Rx/Tx."

    • Extract CAN FD specific settings.

The NI-XNET 17.0 release changes the following:

  • Improvements that require a firmware update for NI 9860 modules and the cDAQ integrated XNET port.

  • Removed support for LabVIEW 2013.

  • Removed support for CVI 2010.

Supported Hardware

  • USB-8501 Low-Speed/Fault Tolerant USB CAN Interface Device

  • USB-8502 High-Speed/FD USB CAN Interface Device

  • USB-8506 USB LIN Interface Device

  • PCI-8511 Low‑Speed/Fault-Tolerant CAN Interface Device

  • PCI-8512 High‑Speed/FD CAN Interface Device

  • PCI-8513 Software‑Selectable/FD CAN Interface Device

  • PCI-8516 PCI LIN Interface Device

  • PCI-8517 FlexRay Interface Device

  • PCIe-8510 PCIe Vehicle Multi-Protocol Interface Device

  • PXI-8511 Low-Speed/Fault Tolerant PXI CAN Interface Module

  • PXI-8512 High-Speed, Flexible Data Rate PXI CAN Interface Module

  • PXI-8513 Software-Selectable PXI CAN Interface Module

  • PXI-8516 PXI LIN Interface Module

  • PXI-8517 PXI FlexRay Interface Module

  • PXIe-8510 PXI Vehicle Multiprotocol Interface Module

  • PXIe-8521 100BASE-T1 PXI Automotive Ethernet Interface Module

  • PXIe-8522 1000BASE-T1 PXI Automotive Ethernet Interface Module

  • PXIe-8523 100/1000BASE-T1 PXI Automotive Ethernet Interface Module

  • TRC-8542 CAN HS/FD Transceiver Cable

  • TRC-8543 CAN HS/FD or LS/FT Transceiver Cable

  • TRC-8546 LIN Transceiver Cable

C Series modules:

  • NI 9860 C Series Vehicle Multiprotocol Interface Module

  • NI 9861 Low-Speed/Fault Tolerant C Series CAN Interface Module

  • NI 9862 High-Speed, Flexible Data Rate C Series CAN Interface Module

  • NI 9866 C Series LIN Interface Module

Supported platforms for XNET C Series modules:

  • CompactDAQ—NI-DAQmx 17.1 (or later) is required for:

    • USB Chassis: cDAQ-9171, cDAQ-9174, cDAQ-9178, and cDAQ-9179

    • Ethernet Chassis: cDAQ-9181, cDAQ-9184, and cDAQ-9188

    • Wireless Chassis: cDAQ-9191

    • cDAQ Controller: cDAQ-9138 (Windows only) and cDAQ-9139 (Windows only)

    • cDAQ Controller: cDAQ-9132 (Windows and RT) and cDAQ-9134 (Windows and RT)

    • cDAQ Controller: cDAQ-9133 (Windows and RT) and cDAQ-9135 (Windows and RT)

    • cDAQ Controller: cDAQ-9136 (Windows and RT) and cDAQ-9137 (Windows and RT)

    • Ethernet Chassis: cDAQ-9185 and cDAQ-9189

  • CompactRIO—CompactRIO 20.0 (or later) and LabVIEW 2017 (or later) are required for the following targets:

    • Integrated CompactRIO Real-Time Controller: cRIO-906x, and cRIO-903x

    • Single-Board RIO: sbRIO-9627, sbRIO-9607

    • CompactRIO Real-Time Controller: cRIO-9032, cRIO-9037

    • CompactRIO Real-Time Controller: cRIO-9035 (Sync), cRIO-9039 (Sync)

    • When using a cRIO-903x or cRIO-906x, a bit stream is not needed with NI 986x modules in the project

    • When using a cRIO-903x, cRIO-906x, or sbRIO-96x7, installation in the "Other" programming environment is not supported

    • CompactRIO Real-Time Controller: cRIO-9040, cRIO-9042, cRIO-9043, cRIO-9045, cRIO-9047, cRIO-9048, and cRIO-9049

    • When using a cRIO-904x, NI 986x modules will only be usable in Real-Time mode, and no bit stream is necessary

  • CompactRIO—CompactRIO 20.0 (or later) and LabVIEW 2018 (or later) are required for the following targets:

    • CompactRIO Real-Time Controller: cRIO-9053, cRIO-9054, cRIO-9056, and cRIO-9057

    • When using a cRIO-905x, NI 986x modules will only be usable in Real-Time mode, and no bit stream is necessary

  • CompactRIO—CompactRIO 20.0 (or later) and LabVIEW 2019 (or later) are required for the following targets:

    • Single-Board RIO: sbRIO-9603, sbRIO-9608, sbRIO-9609, sbRIO-9628, sbRIO-9629, sbRIO-9638

    • When using an sbRIO-9603, sbRIO-9608, sbRIO-9609, sbRIO-9628, sbRIO-9629, or sbRIO-9638, NI 986x modules will only be usable in Real-Time mode, and no bit stream is necessary

Note  The NI-XNET software supports only NI Automotive Ethernet, CAN, FlexRay, and LIN hardware products. For information about software for CAN products from other vendors, refer to the documentation you received with those products.

Known Issues

You can access the NI-XNET 20.5 known issues online at NI-XNET 20.5 Known Issues.

Bug Fixes

You can access the NI-XNET 20.5 bug fix list online at NI-XNET 20.5 Bug Fixes. This list describes a subset of issues fixed in this release. If you have a Bug ID, you can search this list to validate that the issue has been fixed.

Additional Programming TopicsNI-CAN Compatibility

If you intend to use the NI-CAN API with NI-XNET hardware, refer to the NI-XNET Compatibility for NI-CAN appendix in the NI-CAN Hardware and Software Manual.

Deployed databases on LabVIEW Real-Time targets

When upgrading the NI-XNET software on your LabVIEW Real-Time target, you need to re-deploy your database files to that target using a host computer that runs the same version of NI-XNET as the target.

Removing and inserting C Series modules on CompactRIO targets during device communication is not supported

Inserting a module into or removing a module from a cRIO chassis that is actively communicating with an NI 986x module can cause application failures and possibly device damage. This does not apply to controllers which support the NI-DAQmx programming method, such as the cRIO-904x family.

RT Bus Monitor requires LabVIEW Real-Time

Installing software to a Real-Time target using the "Other" programming environment will not run the RT Bus Monitor. To use this utility, select a "LabVIEW" or "LabVIEW NXG" programming environment.

Automating the Installation of NI Products

You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes.
If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software.
For more information about automating the installation of NI products, refer to Automating an Installer in the NI Package Manager manual.

Using NI Software with Microsoft Windows 10

Microsoft Windows 10 is the latest version of the Windows operating system and features significant changes compared to previous versions. Windows 10 introduces several new capabilities and also combines features from both Windows 7 and Windows 8. For more information about NI support for Windows 10, visit ni.com/windows10.

Using NI Software with Microsoft Windows 8.1

When you install NI software on Microsoft Windows 8.1, you will notice a few additional tiles in the Apps view, including shortcuts to NI application software products such as NI LabVIEW, Measurement & Automation Explorer (NI MAX), and NI Launcher. For more information about NI support for Windows 8.1, visit ni.com/windows8.

LabVIEW NXG Support and Considerations

The following sections detail considerations for using NI-XNET with LabVIEW NXG.

LabVIEW NXG Operating Systems and System Requirements

Software support for LabVIEW NXG differs in the following ways:

  • System requirements—Only 64-bit (x64) processors are supported.

  • Operating system—Only 64-bit operating systems are supported. Refer to the Supported Operating Systems section for more information.

Note  Refer to the LabVIEW NXG Readme for additional system requirements.

LabVIEW NXG Help

View context help in LabVIEW by pressing <Ctrl-H> and hovering over an object.
Search for items using the search bar in the upper right corner of the LabVIEW window. You can also view context help for the search results.
Additional documentation is available online at ni.com/manuals.

LabVIEW NXG Examples

Launch LabVIEW and click the Learning tab.
LabVIEW lessons are located in the Lessons tab, and LabVIEW Examples are located in the Examples tab. Follow the instructions in the lessons and examples.

Legal Information

Copyright
© 2009–2020 National Instruments Corporation. All rights reserved.
Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
NI respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
End-User License Agreements and Third-Party Legal Notices
You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:

  • Notices are located in the <National Instruments>_Legal Information and <National Instruments> directories.

  • EULAs are located in the <National Instruments>SharedMDFLegallicense directory.

  • Review <National Instruments>_Legal Information.txt for information on including legal information in installers built with NI products.

U.S. Government Restricted Rights
If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.
IVI Foundation Copyright Notice
Content from the IVI specifications reproduced with permission from the IVI Foundation.
The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on NI trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.
Patents
For patents covering the NI products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the NI Patent Notice at ni.com/patents.
374802W-01


首页
84162741QQ
联系