Windows系统下(Linux和MAC系统下请自行了解清楚)NI的各种软件、模块、工具包、驱动程序,使用NI许可证管理器来激活的,绝大部分的都可以使用NI Lincense Activator来激活,以下链接可下载:
NI序列号Serial Number生成激活工具NI License Activator,LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本
http://pcmv.cn/thread-490-1-1.html
视觉论坛的各种资源,除了视觉相关的模块有使用外,大部分的都不会使用,所以仅提供资源不能提供技术支持。资源的下载地址一般会同时提供NI官方地址和百度网盘的下载地址。某些工具包NI的地址失效或没有NI的下载地址,那视觉论坛也没有办法,只能尝试使用百度网盘地址下载;如果百度网盘的下载地址失效过期,可联系论坛客服更新。现在NI的下载服务器对我国IP地址不是很友好,有些时候速度很慢或大的资源下载很容易出错,这样会造成安装过程各种类型报错而无法安装。建议在下载完成后,对下载资源做校验和验证(NI一般会提供MD5或SHA256等),与官方或视觉论坛提供的校验和对比,一致就可以安装,如果不一致,则需要重新下载。视觉论坛早期下载的资源,那时候NI没有这么多限制,基本上都是正常下载的资源;后期下载的资源,都与NI的正确校验和对比过,保证是正确的资源才上传到百度网盘,所以百度网盘的资源基本上是正确的。校验和工具下载地址:
文件Hash计算器FHash,文件校验和验证下载文件正确性验证,MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算
http://pcmv.cn/thread-26524-1-1.html
NI-XNET 1.5 Driver Download Win32 Eng/Ger/Jpn NI-XNET仪器驱动程序1.5下载
NI-XNET
NI-XNET为配置、开发和调试应用程序提供支持,适用于汽车以太网、CAN、LIN和FlexRay网络的原型验证、仿真和测试。
NI-XNET是一个NI仪器驱动程序,具有一组易用的常见功能,用于读写PXI、PCI、NI CompactDAQ和NI CompactRIO等不同平台的汽车以太网、CANI、LIN和FlexRay帧和信号。NI-XNET CAN、LIN和FlexRay接口经优化,适合需要对数百个CAN帧和信号进行高速实时操作的应用,如硬件在环仿真、快速控制原型、总线监控和自动化控制等。
1.5
文件大小: 472832180 字节 (450.93 MB)
修改日期: 2019-06-25 02:42
MD5: 2c3ae1b726b8ccf5e0795b7f3fc976a2(官方正确)
SHA1: 8655eb1e02cd686a48a15976b3d5564600ed69ab
SHA256: 8703cc649ac8528a2a507146402165e726bb5f964fda2529359dbb609e0717c2
CRC32: 0c968143
NI-XNET 1.5 Driver Download Win32 Eng/Ger/Jpn NI-XNET仪器驱动程序1.5下载
http://pcmv.cn/thread-25155-1-1.html?fromuid=9
(出处: 视觉论坛VISIONBBS|视觉之家VISIONHOME)
NI-XNET 1.5 Readme
Documentation
Supported Platforms
Installing NI-XNET 1.5
New Features and Changes
Known Issues
Bug Fixes
Additional Programming Topics
Documentation
Installing NI-XNET 1.5
Insert the NI-XNET software CD into your CD-ROM drive. The installer launches if your CD-ROM drive plays data CDs automatically. If the installer does not launch automatically, navigate to the CD using Windows Explorer and launch the autorun.exe file from your NI-XNET software CD.
The installation wizard guides you through the necessary steps to install the NI-XNET software. You can go back and change values where appropriate by clicking the Back button. You can exit the setup where appropriate by clicking Cancel.
When the installation is complete, click Finish.
Installing NI-XNET Silently
Supported PlatformsSupported Operating Systems
Windows 7 (32-bit and 64-bit)
Windows Vista (32-bit and 64-bit)
Windows XP (32-bit) SP2 or later
Windows Server 2003 R2 (32-bit)
Windows Server 2008 R2 (64-bit)
Caution If you plan to perform an upgrade of your system from a prior version of Microsoft Windows to Microsoft Windows Vista, you are required to uninstall all National Instruments software prior to performing the upgrade. After the upgrade has been completed, you can reinstall your National Instruments software. |
Supported Hardware
NI PCI-8511 (Low-Speed/Fault-Tolerant CAN)
NI PCI-8512 (High-Speed CAN)
NI PCI-8513 (Software-Selectable HS/LS/SW CAN)
NI PCI-8516 (LIN)
NI PCI-8517 (FlexRay)
NI PXI-8511 (Low-Speed/Fault-Tolerant CAN)
NI PXI-8512 (High-Speed CAN)
NI PXI-8513 (Software-Selectable HS/LS/SW CAN)
NI PXI-8516 (LIN)
NI PXI-8517 (FlexRay)
C Series modules:
CompactDAQ - NI-DAQmx 9.3 (or newer) required:
CompactDAQ - NI-DAQmx 9.4 (or newer) required:
CompactRIO - NI-RIO 4.0 (or newer) and LabVIEW 2010 SP1 (or newer) required for the following targets:
CompactRIO - NI-RIO 4.0 (or newer) and LabVIEW 2011 (or newer) required for the following targets:
NI cDAQ-9174
NI cDAQ-9178
NI cDAQ-9181
NI cDAQ-9188
NI cDAQ-9171
NI cDAQ-9191
Real-Time Controller: NI cRIO-9012, NI cRIO-9014, NI cRIO-9022, and NI cRIO-9024
CompactRIO Reconfigurable Chassis: NI cRIO-9111, NI cRIO-9112, NI cRIO-9113, NI cRIO-9114, NI cRIO-9116, and NI cRIO-9118
LabVIEW FPGA 2010 SP1 (or newer) is required to build and deploy a bitstream with NI 986x modules in the project.
Integrated CompactRIO Real-Time Controller: NI cRIO-9081, NI cRIO-9082
LabVIEW FPGA 2011 (or newer) is required to build and deploy a bitstream with NI 986x modules in the project.
NI 9861 (C Series Low-Speed CAN)
NI 9862 (C Series High-Speed CAN)
NI 9866 (C Series LIN)
Supported platforms for XNET C Series modules:
Supported Development Environments
LabVIEW 8.6, LabVIEW 2009 (32-bit), LabVIEW 2010 (32-bit), and LabVIEW 2011 (32-bit)
LabVIEW Real-Time (RT) 8.6, 2009, 2010, and 2011
LabWindows/CVI 8.5 and higher
Microsoft Visual C/C++ 6.0
New NI-XNET 1.5 Features and Changes as Compared to NI-XNET 1.4
New feature: Added support for the FlexRay Wakeup procedure.
New feature: Added support for the FlexRay Symbol Window.
New feature: Added support for LIN clusters in the FIBEX database (import and export).
New feature: Added support for LIN clusters in the NI-XNET Database Editor.
New feature: NI-XNET start/stop supports blocking behavior for session-only mode.
New feature: Added support for retrieving the started/stopped state of the session. Refer to XNET Read (State Session Info).vi or nxReadState»nxState_SessionInfo.
New feature: The NI-XNET Bus Monitor now can display the signal values of incoming frames.
New feature: Added support for 16-bit multiplexers.
New feature: Added support for importing FIBEX 4.0 database files.
NI-XNET Compatibility Library for NI-CAN: NI-CAN hardware in MAX now shows up under the new NI-CAN Devices category.
CAN Frame sessions allow transmitting a frame where the frame's payload length is less than the payload length configured in the database.
New NI-XNET 1.4 Features and Changes as Compared to NI-XNET 1.3.1
New feature: Added support for new XNET C Series modules: NI 9861 and NI 9866.
New feature: Added TDMS log file format to logging examples.
New feature: Support for the NI cDAQ-9171, NI cDAQ-9181, and NI cDAQ-9191 chassis.
New feature: CAN and LIN sessions can now be created while the corresponding interface is already communicating.
New feature: Up to 192 frames can now be used with XNET CAN interfaces, up from 128.
New feature: Added support for Series 1/Series 2 CAN filters to the NI-CAN Compatibility Library for NI-XNET.
New feature: Added support for the Timestamped Transmit mode to the NI-CAN Compatibility Library for NI-XNET.
General performance improvements when using XNET C Series modules with CompactDAQ.
The C API property nxPropSession_IntfRef has been removed from the nixnet.h header file. This property was not documented in C API help, and was not listed in LabVIEW property nodes.
New NI-XNET 1.3.1 Features and Changes as Compared to NI-XNET 1.3
New feature: Support for LabVIEW 2011 (32-bit).
Deprecated feature: Support for LabVIEW 8.5 and 8.5.1.
New NI-XNET 1.3 Features and Changes as Compared to NI-XNET 1.1.1
New feature: Support of the NI 9862 C Series module.
New feature: FIBEX 3.0 database file support.
New feature: PDU support (FlexRay only).
New feature: Frame/Signal conversion (refer to XNET Convert.vi or the nxConvertFramesToSignalsSinglePoint() and nxConvertSignalsToFramesSinglePoint() functions)
New feature: External transceiver support for CAN XS hardware (NI PCI-8513 and PXI-8513).
New feature: NI-Spy supports logging calls from NI-XNET LabVIEW VIs.
New feature: Reading custom attributes from .dbc files (refer to XNET Database Get DBC Attribute.vi or the nxConvertFramesToSignalsSinglePoint and nxConvertSignalsToFramesSinglePoint functions).
New feature: Allowing multiselect, drag-and-drop in the Tx/Rx frame dialog list boxes of the NI-XNET Database Editor.
New feature: Allowing multiple databases to be used on a single interface (using individual sessions).
Change: Database export file format changed from FIBEX 2.0.1 to 3.1.
New NI-XNET 1.1.1 Features and Changes as Compared to NI-XNET 1.1
New feature: Support for LabVIEW 2010 (32-bit).
New NI-XNET 1.1 Features and Changes as Compared to NI-XNET 1.0
New feature: Support for PCI-8516 and PXI-8516 (LIN bus interface).
New feature: Replay mode (CAN only. Refer to the Interface:Output Stream Timing, Interface:Output Stream List, and Interface:CAN:Output Stream List By ID properties.)
New feature: Cyclic frame spacing (CAN only. Refer to the Frame:CAN:Start Time Offset property.)
New feature: Frame level fault insertion (CAN only: Change the period during runtime. Refer to the Frame:CAN:Transmit Time property. CAN only: Skip N transmissions of a cyclic frame. Refer to the Frame:Skip N Cyclic Frames property.)
New feature: Frame reordering (CAN only. Refer to the Interface:CAN:Pending Transmit Order property.)
New feature: LabVIEW Real-Time support on desktop PC real-time systems.
In the NI-XNET 1.0, you could connect one NI-XNET class to a different NI-XNET class (for example, you could wire an NI-XNET frame to a property node of an NI-XNET signal). This class mismatch in NI-XNET 1.0 usually was detected at runtime only. In LabVIEW 2009, NI-XNET 1.1 shows this as a broken wire at edit time.
Known issues
Issue Number | Issue |
331644 | On Compact DAQ systems, the cyclic output rate is not synchronized with the timestamp counter. This can cause output cyclic messages to transmit at a rate that may drift from the input timestamp rate. |
340351 | Using signals in the NI-XNET Bus Monitor prevents the subordinate mode. Furthermore, you cannot use those signals in your applications that the Bus Monitor is already using. |
341928 | One cannot import diagnostic frames from LDF files (MasterReq/SlaveResp). That includes schedule tables that contain diagnostic frames. |
Bug Fixes
Bug ID | Fixed Issue |
312408 | Using the same trigger signal multiple times within a single session did not work as described. |
339763 | Display of FlexRay frames from log files does not work properly. |
333628 | Revisions C and D of the NI PCI-8513 could enter the bus off state after a cold reboot of the host computer. |
328817 | Crash on certain PCI Express systems. |
319291 | Crash in the NI-XNET Database Editor when trying to convert an NCD file into FIBEX. |
343178 | Crash while using FIBEX database. |
332120 | Unable to import SAE-J2602 databases. |
319616 | NI-XNET Compatibility Library for NI-CAN: Error –52000 reported when using frame and channel API on LabVIEW Real-Time targets. |
318120 | LabVIEW Get DBC Attribute.vi did not use correct enumeration for mode. |
316735 | Timeout error reported when using a baud rate of 2.5 Mbps on FlexRay. |
315556 | A negative "number to read" value does not cause the waveform session to return the maximum number of samples. |
315555 | Running the NI-XNET Bus Monitor in subordinate mode prevents other sessions from being run. |
Bug ID | Fixed Issue |
308704 | LabVIEW could crash with a "Pure virtual function call invoked" error when using Timebase signal on CompactDAQ. |
305079 | The Synchronize TimedLoop to FlexRay Macro Tick LabVIEW example could cause LabVIEW Real-Time to crash under certain timing conditions. |
299236 | The NI-XNET Bus Monitor reported an internal error when attempting to transmit a frame without reading from the network yet. |
308335, 310235 | Improved behaviour of scaling for LIN signals. |
307968 | The C API nxReadSignalWaveform() function returned an incorrect value for the NumberOfValuesReturned parameter when no data was available. |
307799 | Improved behaviour of scaling with invalid number of coefficients for FIBEX files. |
305512 | The NI-XNET Database Editor does not show all PDUs correctly when reimporting larger FIBEX files. |
Bug ID | Fixed Issue |
299336 | The FlexRay Frame Output Queued and the Convert FlexRay Frames to-from Signals examples returned error 0xBFF6309F (-1074384737). |
Bug ID | Fixed Issue |
287495 | NI-XNET database editor: When trying to enter a value for default value with more then 7 digits, the editor coerces the value and creates the coerced value in the FIBEX file. |
281193 | Cannot integrate if using FlexRay In Cycle Repeated Frames with 254 bytes. |
280120 | CAN remote frames are not transmitted when using single-point sessions. |
256773 | The cycle value returned from XNET Read (State FlexRay Cycle Macrotick).vi is not accurate. |
255818 | NI-XNET database editor: Deleting an ECU from an imported FIXED database does not delete the ECU from the FIBEX file. |
254192 | Selecting NI-XNET signals through constant or strings throws an error at session creation time. |
250196 | LabVIEW Project Assistant: Importing XNET Sessions does not import the session, if identical message- and channel-names exist. |
240132 | A LIN Slave Stream Input session requires defining a schedule, although it should not need to. |
237697 | NI-XNET database editor: FlexRay signals are not shown from imported FIBEX files. |
234865 | NI-XNET Compatibility Library for NI-CAN: .ncd or .dbc files cannot be used by NI-XNET Compatibility Library for NI-CAN on LabVIEW Real-Time targets. |
228013 | You can experience high processor load when using a waveform input session with many signals. |
224423 | NI-XNET does not read default and error values correctly from .dbc files. |
222491 | NI-XNET does not read the signal name for a multiplexer correctly from .dbc files. |
214704 | Collision Resolving Schedules were not always executed as highest priority schedule. |
211958 | Error –1074384742/0xBFF6309A is generated when trying to use different clusters on the same interface. |
211634 | LabVIEW Project Assistant: Under certain circumstances, you cannot select LIN interfaces on the Hardware Selection page. |
206976 | Querying the cluster for a receive frame returns an error if there is an ECU and a frame using the same name. |
200103 | NI-XNET Compatibility Library for NI-CAN: You cannot change the frame timing type of CAN frames once the database is in use. |
Bug ID | Fixed Issue |
195809 | NI-XNET Compatibility Library for NI-CAN: ncConfig/ncOpenObject/ncCloseObject functions leak memory and handles. |
194073 | NI-XNET Compatibility Library for NI-CAN: Notifications cannot be rearmed without disabling them first. |
192007 | Read timestamp function may return a timestamp that is off by about 7 minutes. |
181246 | NI-XNET Compatibility Library for NI-CAN: The nctInitialize function and the CAN Init VI do not use the baud rate of a currently running interface. |
180542 | NI-XNET Compatibility Library for NI-CAN: ncConfig called with same parameters on open of CAN objects returns an error. |
193647 | NI-XNET Compatibility Library for NI-CAN: Added code to avoid hanging ncCreateNotification() when attempting to disarm a pending notification. |
206461 | NI-XNET Compatibility Library for NI-CAN: Added code to avoid hanging ncCreateNotification() when attempting to close an object with a pending notification. |
186551 | Losing arbitration while in Single Shot Transmit mode may cause a session to stop sending frames. |
Additional Programming TopicsNI-CAN Compatibility
Deployed databases on LabVIEW Real-Time targets
Removing and inserting C Series modules on CompactRIO targets
Closing the XNET System in LabVIEW 8.6
Notice
Copyright
Trademarks
Patents