石鑫华视觉 手机微信QQ:13450001061 / 18038383457

下载中心

NI-DCPower Driver 1.6 Download Win32/64ENG NI DC电源仪器驱动程序下载1.6

文章来源:石鑫华视觉网时间:2022-05-10 10:19:17 点击:228

Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活，以下链接可下载：
NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本
http://pcmv.cn/thread-490-1-1.html

视觉论坛的各种资源，除了视觉相关的模块有使用外，大部分的都不会使用，所以仅提供资源不能提供技术支持。资源的下载地址一般会同时提供NI官方地址和百度网盘的下载地址。某些工具包NI的地址失效或没有NI的下载地址，那视觉论坛也没有办法，只能尝试使用百度网盘地址下载；如果百度网盘的下载地址失效过期，可联系论坛客服更新。现在NI的下载服务器对我国IP地址不是很友好，有些时候速度很慢或大的资源下载很容易出错，这样会造成安装过程各种类型报错而无法安装。建议在下载完成后，对下载资源做校验和验证（NI一般会提供MD5或SHA256等），与官方或视觉论坛提供的校验和对比，一致就可以安装，如果不一致，则需要重新下载。视觉论坛早期下载的资源，那时候NI没有这么多限制，基本上都是正常下载的资源；后期下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘，所以百度网盘的资源基本上是正确的。校验和工具下载地址：
文件Hash计算器FHash,文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算
http://pcmv.cn/thread-26524-1-1.html

NI-DCPower Driver 1.6 Download Win32/64ENG NI DC电源仪器驱动程序下载1.6

NI-DCPower
NI-DCPower为使用NI DC电源和源测量单元(SMU)的客户提供支持。
NI-DCPower是与所有NI可编程电源和SMU进行通信必需的NI仪器驱动程序。NI-DCPower是一种可兼容可互换虚拟仪器(IVI)的仪器驱动程序，提供一系列操作和属性，可以执行波形或信号发生器的功能，并包含交互式软件前面板和示例。

1.6
文件大小: 1431387724 字节 (1.33 GB)
修改日期: 2011-09-27 09:46
MD5: 979b5f8528989ac4301f02084e5dd1a2（官方正确）
SHA1: eb886d0f850572c61a39080e22e010fae655b588
SHA256: 09b06c5f6a9039ae30fb9ebc6a446e3d785bf7e443b9989f0de98e4235136221
CRC32: 5093be94

NI-DCPower Driver 1.6 Download Win32/64ENG NI DC电源仪器驱动程序下载1.6

http://pcmv.cn/thread-25112-1-1.html?fromuid=9

(出处: 视觉论坛VISIONBBS|视觉之家VISIONHOME)



NI-DCPower Readme

Version 1.6
Thank you for using NI-DCPower. This file contains important information about NI-DCPower and is organized into the following sections:

  • New Features

  • Supported Hardware

  • System Requirements

  • Installed File Names and Locations

    • Software

    • Documentation

    • Examples

  • Uninstalling/Modifying NI-DCPower

  • Known Issues

  • Bug Fixes

New Features in Version 1.6

  • Support for NI PXIe-4140/4141

  • Support for new signal routes added to the NI PXI-4132 (Source Complete event to Measure trigger) and the NI PXIe-4140/4141/4154 (Measure trigger to Source trigger, Source trigger to Measure trigger, and Source Complete event to Measure trigger)

New Features in Version 1.5

  • Support for NI PXIe-4154

  • Support for channel-based sessions

  • Support for measure records

  • The NI PXI-4132 now supports streaming sequences, allowing the size of a sequence to be virtually unlimited.

New Features in Version 1.4.1

  • Support for LabVIEW 2010 (32-bit and 64-bit)

  • Support removed for LabVIEW 8.2.1

New Features in Version 1.4

  • Support for LabVIEW 2009 (64-bit)

  • Support for NI PXI-4132

  • Support for 64-bit user mode

New Features in Version 1.3.1

  • Support for LabVIEW 2009 (32-bit)

  • Support removed for LabVIEW 7.1.1

New Features in Version 1.3

  • Japanese localization for driver, LabVIEW application programming interface (API), and documentation

  • New behavior: Error and self-test message strings now return localized values in LabVIEW. User applications that check the value of these strings (or trap errors by comparing the error cluster) may experience a change in behavior.

Supported Hardware

NI-DCPower 1.6 and later supports the following power supply and source-measure units (SMUs):

  • NI PXI-4110

  • NI PXI-4130

  • NI PXI-4132

  • NI PXIe-4140

  • NI PXIe-4141

  • NI PXIe-4154

NOTE:  If you are using a PXI product, notice that MXI-4 is supported under Windows 7/Vista/XP, but MXI-3 is only supported under Windows XP.

System RequirementsSupported Operating Systems

NI-DCPower 1.6 and later supports the following operating systems:

  • Windows 7 (32-bit and 64-bit)

  • Windows Vista (32-bit and 64-bit)

  • Windows XP (32-bit)

  • Windows Server 2003 R2 (32-bit)

  • Windows Server 2008 R2 (64-bit)

NOTE:  NI-DCPower 1.6 and later does not support Windows Server non-R2 editions.
It is recommended that you have the most recent service pack for your operating system installed. Windows 2000 users must use NI-DCPower 1.4 or earlier.

Supported Real-Time Operating Environments

NI-DCPower 1.6 and later supports the following real-time operating environments:

  • LabVIEW Real-Time Module

  • LabWindows/CVI Real-Time Module

Minimum System

  • Processor—Pentium III/Celeron 600 MHz or equivalent

  • RAM

    • Windows XP: 128 MB

    • Windows 7/Vista: 512 MB

  • Microsoft Internet Explorer 5.5 or later

  • A screen resolution of 800 x 600 with 256 colors

  • Windows 7/Vista/XP, with all available critical updates and service packs

Recommended System

  • Processor—Pentium 4 or equivalent

  • RAM

    • Windows XP: 256 MB

    • Windows 7/Vista: 1 GB

  • A screen resolution of 1,024 x 768

  • Windows 7/Vista/XP, with all available critical updates and service packs

  • If you are running your application on an RT target, 64 MB of memory or more is recommended.

Application Development Environments (ADEs)

  • LabVIEW 8.5.1, 8.6.1, 2009 SP1 (32-bit), 2009 SP1 (64-bit), 2010 SP1 (32-bit), or 2010 SP1 (64-bit)

  • LabVIEW Real-Time Module 8.5.1 or later

  • LabWindows™/CVI™ 8.1.1 or later

  • LabWindows/CVI Real-Time Module 8.1 or later

  • Microsoft Visual C++ (MSVC) 6.0 or later

  • Microsoft Visual Basic 6.0

Installed File Names and LocationsSoftware

  • National Instruments file folder location, <NIDocDir>:

    • Windows 7/Vista: UsersPublicDocumentsNational Instruments

    • Windows XP: Documents and SettingsAll UsersShared DocumentsNational Instruments

  • National Instruments file folder location, <IVIROOTDIR32>:

    • Windows 7/Vista/XP 32-bit: Program FilesIVI

    • Windows 7/Vista 64-bit: Program Files (x86)IVI

    • Windows 7/Vista/XP 32-bit: Program FilesIVI FoundationIVI

    • Windows 7/Vista 64-bit: Program Files (x86)IVI FoundationIVI

      NOTES:$(IVIROOTDIR32) is configured as an environment variable on the target system.

      		If you upgraded an installation of IVI, your files may be located in the following location:


  • National Instruments file folder location, <IVIROOTDIR64>:

    • Windows Vista 64-bit: Program FilesIVI FoundationIVI

      NOTE:$(IVIROOTDIR64) is configured as an environment variable on the target system.


File Locations

ItemInstalled Location on Windows 7/Vista/XP
NI-DCPower<IVIROOTDIR32>Drivers iDCPower
NI-DCPower Function Panel<IVIROOTDIR32>Drivers iDCPower iDCPower.fp
NI-DCPower Examples<NIDocDir> iDCPowerExamples
NI-DCPower Header files<IVIROOTDIR32>Include
NI-DCPower Import Library files (32-bit)<IVIROOTDIR32>Lib
NI-DCPower Import Library files (64-bit)<IVIROOTDIR32>Lib_x64
NI-DCPower DLL (32-bit)<IVIROOTDIR32>Bin


Additional File Locations for Windows 7/Vista 64-bit

ItemInstalled Location on Windows 7/Vista 64-bit
NI-DCPower Function Panel<IVIROOTDIR64>Drivers iDCPower iDCPower.fp
NI-DCPower Header files<IVIROOTDIR64>Include
NI-DCPower Import Library files (64-bit)<IVIROOTDIR64>Lib_x64
NI-DCPower DLL (64-bit)<IVIROOTDIR64>Bin


Documentation

Documentation is available at Start»All Programs»National Instruments»NI-DCPower»Documentation. The documentation set is composed of the following documents:

  • NI-DCPower Readme

  • NI DC Power Supplies and SMUs Getting Started Guide

    Printed and PDF format. Contains hardware and software installation, MAX configuration, and signal connection information.

  • NI DC Power Supplies and SMUs Help

    HTML help format. Contains power supply fundamentals, hardware device overview, programming information, LabVIEW reference, and C/CVI/VB reference sections.

  • NI PXI-4110 Specifications

    Printed and PDF format. Lists specifications for the NI PXI-4110 triple-output, programmable DC power supply.

  • NI PXI-4110 Calibration Procedure

    PDF format. Contains calibration instructions for the NI PXI-4110.

  • NI PXI-4130 Specifications

    Printed and PDF format. Lists specifications for the NI PXI-4130 dual-channel, power SMU.

  • NI PXI-4130 Calibration Procedure

    PDF format. Contains calibration instructions for the NI PXI-4130.

  • NI PXI-4132 Specifications

    Printed and PDF format. Lists specifications for the NI PXI-4132 single-channel, precision SMU.

  • NI PXI-4132 Calibration Procedure

    PDF format. Contains calibration instructions for the NI PXI-4132.

  • NI PXIe-4140/4141 Specifications

    Printed and PDF format. Lists specifications for the NI PXI-4140 four-channel, four-quadrant SMU and the NI PXIe-4141 four-channel, four-quadrant precision SMU with enhanced capabilities including programmable compensation.

  • NI PXIe-4140/4141 Calibration Procedure

    PDF format. Contains calibration instructions for the NI PXI-4140/4141.

  • NI PXIe-4154 Specifications

    Printed and PDF format. Lists specifications for the NI PXIe-4154 battery simulator.

  • NI PXIe-4154 Calibration Procedure

    PDF format. Contains calibration instructions for the NI PXIe-4154.

  • Maintain Forced-Air Cooling Note to Users

    Printed format. Contains important cooling information for NI DC power supplies and SMUs.

  • Read Me First: Safety and Electromagnetic Compatibility

    Printed format. Contains safety instructions and electromagnetic compatibility (EMC) information for the hardware it accompanies.


Examples

Refer to Start»All Programs»National Instruments»NI-DCPower»Examples for the examples for the supported ADEs.
Refer to the Installed File Names and Locations section for the installed locations of the example sets.

Uninstalling/Modifying NI-DCPower

For Windows XP, complete the following steps:

  • Launch the Control Panel by selecting Start»Settings.

  • Double-click Add/Remove Programs.

  • Select National Instruments Software.

  • Click Change/Remove.

  • Select NI-DCPower 1.6 from the dialog box that appears.

  • Click Remove to uninstall the product; click Modify to change the components that are installed.

For Windows 7/Vista, complete the following steps:

  • Launch the Control Panel by selecting Start»Control Panel.

  • Double-click Programs and Features.

  • Select National Instruments Software.

  • Click the Uninstall/Change button.

  • Select NI-DCPower 1.6 from the dialog box that appears.

  • Click Remove to uninstall the product; click Modify to change the components that are installed.

As part of the NI-DCPower installation, the following list of software was installed. To completely remove NI-DCPower from your system, you must remove all of these packages also.

  • NI IVI Compliance Package 4.2

  • NI Measurement & Automation Explorer 4.7.2

  • NI-DAQmx 9.1.7

  • NI-VISA 5.0

  • NI Spy 2.7.2


Caution  Several of the software packages listed above are shared with other NI software packages. If you attempt to remove a piece of software that something else is dependent on, a message launches to warn you about the software dependencies. You can choose to either uninstall all of the software or to leave the shared software installed. If you choose to uninstall the shared software, some of your other NI software may no longer function correctly.

Known Issues

You can access the software and documentation known issues list online. Refer to the NI-DCPower 1.6 Known Issues List web page on the National Instruments Web site for an up-to-date list of known issues in NI-DCPower 1.6.

Bug Fixes

The following items are changes in NI-DCPower 1.6 from NI-DCPower 1.5.
IDFixed Issue
283254Warning 1073364993 is now returned instead of error -1074118605 if a measurement is taken while the device is performing a range change.
The following items are changes in NI-DCPower 1.5 from NI-DCPower 1.4.
IDFixed Issue
217333The source delay attribute will be coerced to a minimum of 30μs on the NI PXI-4132.
178242When handshaking on the NI PXI-4132 with other devices using the source trigger and measure complete event, the source trigger will no longer be missed.

Important Information

Copyright
© 2006–2011 National Instruments Corporation. All rights reserved.
Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
Trademarks
CVI, LabVIEW, National Instruments, NI, ni.com, the National Instruments corporate logo, and the Eagle logo are trademarks of National Instruments Corporation. Refer to the Trademark Information at ni.com/trademarks for other National Instruments trademarks.
The mark LabWindows is used under a license from Microsoft Corporation. Windows is a registered trademark of Microsoft Corporation in the United States and other countries.
Other product and company names mentioned herein are trademarks or trade names of their respective companies.
Patents
For patents covering the National Instruments products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.


首页
84162741QQ
联系