Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活，以下链接可下载：
NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本
http://pcmv.cn/thread-490-1-1.html
视觉论坛的各种资源，除了视觉相关的模块有使用外，大部分的都不会使用，所以仅提供资源不能提供技术支持。资源的下载地址一般会同时提供NI官方地址和百度网盘的下载地址。某些工具包NI的地址失效或没有NI的下载地址，那视觉论坛也没有办法，只能尝试使用百度网盘地址下载；如果百度网盘的下载地址失效过期，可联系论坛客服更新。现在NI的下载服务器对我国IP地址不是很友好，有些时候速度很慢或大的资源下载很容易出错，这样会造成安装过程各种类型报错而无法安装。建议在下载完成后，对下载资源做校验和验证（NI一般会提供MD5或SHA256等），与官方或视觉论坛提供的校验和对比，一致就可以安装，如果不一致，则需要重新下载。视觉论坛早期下载的资源，那时候NI没有这么多限制，基本上都是正常下载的资源；后期下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘，所以百度网盘的资源基本上是正确的。校验和工具下载地址：
文件Hash计算器FHash,文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算
http://pcmv.cn/thread-26524-1-1.html
NI-Sync 16.0 Driver Download Win32/64Eng NI PXI同步模块及实时控制器驱动程序下载June.2016
NI-Sync用于支持用户使用PXI同步模块或任何运行实时操作系统的NI控制器。
NI-Sync是一个NI仪器驱动程序，用于配置系统定时和同步，包括基于信号的同步和直接使用时钟。您还可以使用时间协议（如IEEE 1588标准，IEEE 802.1AS标准，IRIG或GPS）执行基于时间的同步，作为时间戳的时间参考或执行同步时钟和触发生成。NI-Sync支持PXI同步模块和实时PXI、CompactDAQ和CompactRIO控制器以及紧凑视觉系统和工业控制器。NI-Sync中还包括高级实用程序及范例，可帮助用户更轻松地创建应用程序。
百度网盘下载（限速，请开会员或使用工具下载）:
请注册视觉论坛会员，登陆购买附件查看，充值请联系在线客服
NI官方下载地址（可能无法下载完成或地址无效）：
请注册视觉论坛会员，登陆购买附件查看，充值请联系在线客服
NI-Sync 16.0 Driver Download Win32/64Eng NI PXI同步模块及实时控制器驱动程序下载June.2016
http://pcmv.cn/thread-24922-1-1.html?fromuid=9
(出处: 视觉论坛VISIONBBS|视觉之家VISIONHOME)
文件大小: 1489321504 字节 (1.39 GB)
修改日期: 2016-07-12 04:21
MD5: f04f9cb0972b2300c5ba0668a5b0d13e
SHA1: f7859daf852cd3cbbc46c339a1ebc1ca31d1fc27
SHA256: 3b5680d455372390f8fdbc30eb477cf5ed876010e8303a869bde8c7eae4fc819
CRC32: c3adb651
NI-Sync 16.0 Readme
June 2016
This file includes important information about NI-Sync, including system requirements, a partial list of bugs fixed for NI-Sync 16.0, and known issues.
Contents
Supported Operating Systems
Application Software Support
NI Software Support for Microsoft Windows 7, Windows Vista, Windows XP, and Windows Server 2003
Supported Devices
Product Security and Critical Updates
Known Issues
Bug Fixes
Finding Examples
Automating the Installation of NI Products
Using NI Software with Microsoft Windows 10
Using NI Software with Microsoft Windows 8.1
Legal Information
Supported Operating Systems
NI-Sync 16.0 supports the following operating systems:
Windows 7 x86, x64
Windows 8.1 x86, x64
Windows 10 x86, x64
Windows Server 2008 R2 (x64)
Windows Server 2012 R2 (x64)
NI Real-Time Phar Lap ETS
Application Software Support
The following table lists the application software versions, including service packs, supported by NI-Sync.
| Application Software | Versions Supported by NI-Sync |
| LabVIEW | 2013, 2014, 2015, 2016 |
| LabVIEW Real-Time Module | 2013, 2014, 2015, 2016 |
| LabWindows™/CVI™ | 2013, 2015 |
NI-Sync 16.0 Drops Support for Microsoft Windows 7 RTM, Windows Vista, Windows XP, and Windows Server 2003
With this release, NI-Sync drops support for Windows 7 RTM (with no service pack), Windows Vista, Windows XP, and Windows Server 2003. NI-Sync 16.0 and later will not install or run on an unsupported OS. You cannot deploy or distribute applications that use NI-Sync 16.0 to an unsupported OS. Additionally, after installing NI-Sync 16.0, you cannot use any installers built on this computer with any version of LabVIEW, LabWindows™/CVI™, NI TestStand™, or Measurement Studio on an unsupported OS.
For more information about the changes to our OS support for 2016, refer to KB 79UC78LS, Why Does my LabVIEW, LabWindows/CVI, Measurement Studio, or TestStand Built Installer Fail on Windows XP/Vista and Server 2003?.
Supported Devices
NI-Sync 16.0 supports the following devices:
Signal-Based Modules
NI PXI-6651
NI PXI-6652
NI PXI-6653
NI PXIe-6672
NI PXIe-6674
NI PXIe-6674T
Time-Based Modules
NI PCI-1588
NI PXI-6682
NI PXI-6682H
NI PXI-6683
NI PXI-6683H
Product Security and Critical Updates
Visit ni.com/security to view and subscribe to receive security notifications about NI products. Visit ni.com/critical-updates for information about critical updates from NI.
Known Issues
You can access the software and documentation known issues list online. For a list of known issues with NI-Sync 16.0, visit ni.com/info and enter the Info Code NISync160KnownIssues.
Bug Fixes
For a list of bug fixes for NI-Sync, visit ni.com/info and enter the Info Code NISyncFixList.
Finding Examples
Select Help»Find Examples from LabVIEW to launch the NI Example Finder. LabVIEW examples for NI-Sync are located in the examplesinstr
iSync directory. You can modify an example VI to fit an application, or you can copy and paste from one or more examples into a VI that you create.
For signal-based examples that use clocks and triggers directly, open the NI Example Finder and navigate to Hardware Input and Output»Timing and Synchronization»Signal-Based.
For time-based examples that use time references such as IEEE 1588-2008 or GPS as a basis for synchronization, open the NI Example Finder and navigate to Hardware Input and Output»Timing and Synchronization»Time-Based.
Automating the Installation of NI Products
You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes. However, starting with the August 2012 releases (products using NI Installers version 3.1 or later), you may need to perform additional steps before or during a silent installation of NI software.
If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software.
For more information, refer to the following KnowledgeBase articles:
For more information on silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.
For more information on silent installations of suited NI products, such as NI Developer Suite, refer to KB 4GGGDQH0, How Do I Automate the Installation of a Suited Installer?.
To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My National Instruments Installer?.
Using NI Software with Microsoft Windows 10
Microsoft Windows 10 is the latest version of the Windows operating system and features significant changes compared to previous versions. Windows 10 introduces several new capabilities and also combines features from both Windows 7 and Windows 8. For more information about NI support for Windows 10, visit ni.com/windows10.
Using NI Software with Microsoft Windows 8.1
When you install NI software on Microsoft Windows 8.1, you will notice a few additional tiles in the Apps view, including shortcuts to NI application software products such as LabVIEW, Measurement & Automation Explorer (NI MAX), and NI Launcher. For more information about NI support for Windows 8.1, visit ni.com/windows8.
| Note MAX does not appear as a desktop shortcut when installed on Microsoft Windows 8.x. You can launch MAX either from the Apps view or from within NI Launcher. |
Legal Information
Copyright
©2003-2016 National Instruments. All rights reserved.
Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
End-User License Agreements and Third-Party Legal Notices
You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:
Notices are located in the <National Instruments>_Legal Information and <National Instruments> directories.
EULAs are located in the <National Instruments>SharedMDFLegallicense directory.
Review <National Instruments>_Legal Information.txt for information on including legal information in installers built with NI products.
U.S. Government Restricted Rights
If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 for military agencies.
IVI Foundation Copyright Notice
Content from the IVI specifications reproduced with permission from the IVI Foundation.
The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
Trademarks
Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on National Instruments trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.
Patents
For patents covering the National Instruments products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.
375085D-01
