石鑫华视觉
Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活，以下链接可下载：
NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本
http://pcmv.cn/thread-490-1-1.html
视觉论坛的各种资源，除了视觉相关的模块有使用外，大部分的都不会使用，所以仅提供资源不能提供技术支持。资源的下载地址一般会同时提供NI官方地址和百度网盘的下载地址。某些工具包NI的地址失效或没有NI的下载地址，那视觉论坛也没有办法，只能尝试使用百度网盘地址下载；如果百度网盘的下载地址失效过期，可联系论坛客服更新。现在NI的下载服务器对我国IP地址不是很友好，有些时候速度很慢或大的资源下载很容易出错，这样会造成安装过程各种类型报错而无法安装。建议在下载完成后，对下载资源做校验和验证（NI一般会提供MD5或SHA256等），与官方或视觉论坛提供的校验和对比，一致就可以安装，如果不一致，则需要重新下载。视觉论坛早期下载的资源，那时候NI没有这么多限制，基本上都是正常下载的资源；后期下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘，所以百度网盘的资源基本上是正确的。校验和工具下载地址：
文件Hash计算器FHash,文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算
http://pcmv.cn/thread-26524-1-1.html
NI DIAdem 2022Q2 Win64DE NI数据管理软件2022第二季度DIADEM2022Q2基本高级专业版德语版DIAdem22.0.0-64bit
从2014版起，将默认包含DAC模块，不再另外发行DAC版本的DIAdem软件。从2015版起，提供32位、64位版本，且提供英德日三种语言版本。从2018版起，放弃32位版本，仅提供64位版本，同时有英德日三种语言版本。
DIAdem是一款应用软件，可帮助您快速查找、检查、分析和报告测量数据。
DIAdem是一个统一的单一软件环境，可帮助您更高效地进行测量数据后期处理。 DIAdem针对大型数据集进行了优化，内含的工具可帮助您快速搜索所需的数据，查看和研究数据，使用特定工程分析函数转换数据，并使用强大的拖放式报告编辑器共享结果。 您可以在DIAdem中使用脚本来自动执行重复的数据后处理任务，并高效地将测量数据转换为有价值的信息。
DIAdem 2022Q2
发布日期：
2022/4/22
包含的版本：
2022 Q2 专业版、基本版、高级版
支持的操作系统：
Windows 10 64-bit
Windows 11
Windows Server 2016 64-bit
Windows Server 2019 64-bit
Windows Server 2022 64-bit
语言：
German
应用程序位数：
64位
校验和：
百度网盘和NI官方下载地址：
请注册登陆视觉论坛用户，充值购买附件查看下载地址
NI DIAdem 2022Q2 Win64DE NI数据管理软件2022第二季度DIADEM2022Q2基本高级专业版德语版DIAdem22.0.0-64bit
http://pcmv.cn/thread-28657-1-1.html?fromuid=9
(出处: 视觉论坛VISIONBBS|视觉之家VISIONHOME)
DIAdem 2022 Q2 Release Notes
DIAdem Release Notes: Known issues, bugs fixed since the last release, and other notes about this release
DIAdem Manuals: New features, behavior changes, and other documentation
Overview
System Requirements
Hardware
| CPU | x64 compatible processor, 1.6 GHz or more |
| Amount of memory | 2 GB or more |
| Hard disk memory | Depending on the operating system, up to 6 GB free storage space on the system partition |
| Graphic card | Color depth at least 16-bit (High Color), 24-bit, or 32-bit (True Color) recommended |
| Screen resolution | From 1280x800 with a scaling step of 100% |
Supported Operating Systems
Windows 11
Windows 10 64-bit
Windows Server 2019
Windows Server 2016
Administration
| Firewall | The firewall displays warnings while DIAdem installs and while DIAdem launches, for the following reasons: The usireg component executes during the installation of DataPlugins. The DataFinder, which you use for searching and navigating in files, then starts. When DIAdem launches, a DNS query determines whether to license locally or whether to use a license server. If you want to be able to use all the DIAdem functions, NI recommends that you select "Do not block" for all programs listed. This also applies when you want to evaluate DIAdem. Refer to ni.com/info under the winxpsp2 info code for more information. |
| Windows User Permissions | DIAdem and its components are basically executable under the pre-configured Microsoft Windows user accounts from User upwards. DIAdem must be installed with full administrator permissions. If you operate various DIAdem versions on one computer, you only have the entire range of functions in each version if you have administrator rights. |
Miscellaneous
Recommended:
- Adobe Reader to display manual files
DIAdem installs the base package of Python 3.8 (64-bit). DIAdem also supports Python versions 3.6, 3.7, and 3.9 (64-bit).
Installation Instructions
Notes
If Windows Update is enabled, the installation process might hang if Windows Update interferes with the installation of Microsoft Visual C++ 2015 Run-Time. Visit ni.com/r/exjq43 for more information and steps to resolve this issue.
If you purchased this product with an NI Software Suite or NI Product Bundle, use the installation media that shipped with your purchase to install this product.
Use the serial number that is included with your software to activate DIAdem. For more information about how to activate DIAdem, refer to the NI License Manager Help.
Notes on DIAdem 2022 Q2
DIAdem 2019 and later versions no longer support the projection of data with color shading or with deformation onto a 3D model of the test object in DIAdem VIEW.
As of the DIAdem 2019 installation, the 64-bit version of My DataFinder replaces earlier 32-bit installations. The configuration of My DataFinder takes place in DIAdem versions 2019 or later in DIAdem. In DIAdem versions later than 2019, you configure My DataFinder using the tray icon in the Windows taskbar. C ++ DataPlugins, which are only available in a 32-bit version, need to upgrade to a 64-bit version.
As of DIAdem 2018, you can no longer connect to My DataFinder from a remote computer.
For the MyDataFinder in DIAdem 2022 Q2, any index files from earlier DIAdem versions must be regenerated. This occurs automatically when you launch DIAdem. Depending on how many files are to be indexed, this may take quite some time.
Scripts written for the use on SystemLink analysis automation are subject to certain restrictions. Refer to Analysis Automation, General in the Help, for further information.
When you activate DIAdem, you must create a NI user profile at ni.com. The evaluation period is now 7 days without a user profile. If you create a user profile, this period is extended to 45 days.
When using the OPC UA server, a missing Windows update can lead to error messages because functions or DLLs are missing. If this error occurs, check the logfile as to whether a message describes an error in the search path extension. To eliminate this error, install the Windows Update KB2533623 at https://www.microsoft.com/download/details.aspx?id=26767.
When loading a DAC block diagram, DIAdem now checks whether the block diagram contains outdated blocks. The block diagram can still run with these blocks, however the outdated blocks are identified with a label. Please replace these by up-to-date blocks because in future versions the earlier blocks will no longer be supported.
In order to use the following DIAdem drivers the following NI software components must be installed:
Driver | Components | Version |
| ADCS | Automotive Diagnostic Command Set | >= 18.0 |
| DAQmx driver | NI-DAQmx | >= 17.0 |
| ECU MC | ECU Measurement and Calibration Toolkit | >= 18.0 |
| XNET | NI-XNET | >= 15.0 |
Older hardware is no longer supported by the modified minimum requirements, including NI PCI-MIO-16XE-10 and NI PCI-MIO-16XE-50 in the PCMCIA version and NI 6533 as a DAQ card.
Very old commands and variables, which have been replaced by new technologies, are marked as obsolete in DIAdem. This means that these commands and variables are no longer supported in one of the upcoming DIAdem versions. On the DIAdem help page DIAdem»Searching for Obsolete Commands and Variables you can find a script which checks your scripts for obsolete identifiers.
The previously obsolete commands DataCheckChnls and DataSelChn have been permanently removed from DIAdem. Use the Selection collection instead.
If you install an earlier DIAdem version after you have installed the current DIAdem version, the PDF export of the earlier version might not function correctly. You can solve the issue by copying the files acfpdf*.* and cdintf*.dll from the current DIAdem program folder into the program folder of the earlier DIAdem version.
From version 2018 onwards, DIAdem imports VBS DataPlugins in encrypted form by default. You can only import and then process a DataPlugin unencrypted if you select Import DataPlugin in the DataPlugin Settings dialog box.
The images you use in the Picture for Tree SUD property must have a minimum size of 16*16 pixels.
You cannot use VIs that require .NET assemblies from DIAdem through the LVRuntime object.
Compatibility of DIAdem 2022 Q2 with DIAdem 2021 SP1
The SUD file format is unchanged compared to DIAdem 2021 SP1, so that SUD dialogs can be loaded in DIAdem 2021 SP1.
Notes on Future DIAdem Versions
None
Product Security and Critical Updates
New Features in DIAdem 2022 Q2DIAdem NAVIGATOR, DataFinder, Data Portal
In a script, you can update the QueryForm with the new command Navigator.Display.CurrDataFinder.QueryForm.RefreshAll so that additional properties previously optimized in a script are then offered for selection in the QueryForm and their value ranges are available.
With the Data.Move command, you can efficiently move multiple channels or multiple groups to another position in the data portal.
DIAdem VIEW
In all areas you can delete the VIEW area using the new entry "Delete Area" in the popup menu of the VIEW area. Previously, this was only possible via the context menu.
DIAdem REPORT
You can now easily transfer the object to VIEW via the context menu of the object in REPORT.
DIAdem ANALYSIS
The function to remove duplicates (ChnDeleteDuplicateValues) has been extended by taking a maximum, minimum or average value of dependent channels when reducing.
DIAdem Script
In Python scripts, CodeCompletion is now offered for enumerated variables and polymorphic objects. The support of external modules in CodeCompletion has been improved. The data type of a variable is displayed in the tooltip. While entering parameters of a function, a short help for this parameter appears.
Preview Features
The DIAdem Python environment also supports Python version 3.9.
DIAdem supports complex channels. You can load and save complex channels. You can convert numeric channels to complex channels and vice versa.
Accessing the Help
Finding Examples
Automating the Installation of NI Products
Unsupported Windows Operating Systems
Legal Information
Notices are located in the <National Instruments>_Legal Information and <National Instruments> directories.
EULAs are located in the <National Instruments>SharedMDFLegallicense directory.
Review <National Instruments>_Legal Information.txt for information on including legal information in installers built with NI products.