石鑫华视觉
Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活，以下链接可下载：
NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本
http://pcmv.cn/thread-490-1-1.html
视觉论坛的各种资源，除了视觉相关的模块有使用外，大部分的都不会使用，所以仅提供资源不能提供技术支持。资源的下载地址一般会同时提供NI官方地址和百度网盘的下载地址。某些工具包NI的地址失效或没有NI的下载地址，那视觉论坛也没有办法，只能尝试使用百度网盘地址下载；如果百度网盘的下载地址失效过期，可联系论坛客服更新。现在NI的下载服务器对我国IP地址不是很友好，有些时候速度很慢或大的资源下载很容易出错，这样会造成安装过程各种类型报错而无法安装。建议在下载完成后，对下载资源做校验和验证（NI一般会提供MD5或SHA256等），与官方或视觉论坛提供的校验和对比，一致就可以安装，如果不一致，则需要重新下载。视觉论坛早期下载的资源，那时候NI没有这么多限制，基本上都是正常下载的资源；后期下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘，所以百度网盘的资源基本上是正确的。校验和工具下载地址：
文件Hash计算器FHash,文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算
http://pcmv.cn/thread-26524-1-1.html
NI DIAdem 2021 Download Win64De NI数据管理软件DIADEM2021基本高级专业版德语版离线安装版下载DIAdem21.0.0-64bit German
从2014版起，将默认包含DAC模块，不再另外发行DAC版本的DIAdem软件。从2015版起，提供32位、64位版本，且提供英德日三种语言版本（我方仅提供英语版）。从2018版起，放弃32位版本，仅提供64位版本，同时有英德日三种语言版本（我方仅提供英语版）
DIAdem是一款应用软件，可帮助您快速查找、检查、分析和报告测量数据。
DIAdem是一个统一的单一软件环境，可帮助您更高效地进行测量数据后期处理。 DIAdem针对大型数据集进行了优化，内含的工具可帮助您快速搜索所需的数据，查看和研究数据，使用特定工程分析函数转换数据，并使用强大的拖放式报告编辑器共享结果。 您可以在DIAdem中使用脚本来自动执行重复的数据后处理任务，并高效地将测量数据转换为有价值的信息。
DIAdem 2021Ger
文件大小: 1011558400 字节 (964.70 MB)
修改日期: 2021-04-16 16:31
MD5: 42ef452397ea0a61b93511e9a709e05f（官方正确）
SHA1: 4ea528bf961f62c2afbb6e58b702d626115b9cb3
SHA256: 0d12b1740459d13ac18c8c12aa7962bb991030a115a5bcd3f84620ada2759537
CRC32: 7b1cb1ee
百度网盘和NI官方下载地址：
NI DIAdem 2021 Download Win64De NI数据管理软件DIADEM2021基本高级专业版德语版离线安装版下载DIAdem21.0.0-64bit German
http://pcmv.cn/thread-27206-1-1.html?fromuid=9
(出处: 视觉论坛VISIONBBS|视觉之家VISIONHOME)
DIAdem 2021 Release Notes
DIAdem Release Notes: Known issues, bugs fixed since the last release, and other notes about this release
DIAdem Manuals: New features, behavior changes, and other documentation
Overview
System Requirements
Hardware
| CPU | x64 compatible processor, 1.6 GHz or more |
| Amount of memory | 2 GB or more |
| Hard disk memory | Depending on the operating system, up to 6 GB free storage space on the system partition |
| Graphic card | Color depth at least 16-bit (High Color), 24-bit, or 32-bit (True Color) recommended |
| Screen resolution | From 1280x800 with a scaling step of 100% |
Supported Operating Systems
Windows 10 64-bit
Windows Server 2019
Windows Server 2016
Note For automatic evaluation on server operating systems, NI recommends the use of the SystemLink module Analysis Automation instead of DIAdem.
Note DIAdem runs only with restrictions on the N or KN edition of Windows because the multimedia support is missing. You can obtain this as "Media Feature Pack" from Microsoft and install it later.
Administration
| Firewall | The firewall displays warnings while DIAdem installs and while DIAdem launches, for the following reasons: The usireg component executes during the installation of DataPlugins. The DataFinder, which you use for searching and navigating in files, then starts. When DIAdem launches, a DNS query determines whether to license locally or whether to use a license server. If you want to be able to use all the DIAdem functions, NI recommends that you select "Do not block" for all programs listed. This also applies when you want to evaluate DIAdem. Refer to ni.com/info under the winxpsp2 info code for more information. |
| Windows User Permissions | DIAdem and its components are basically executable under the pre-configured Microsoft Windows user accounts from User upwards. DIAdem must be installed with full administrator permissions. If you operate various DIAdem versions on one computer, you only have the entire range of functions in each version if you have administrator rights. |
Miscellaneous
Internet Explorer: For the map display in DIAdem VIEW and DIAdem DAC, you need Internet Explorer version 11 or later.
Recommended:
- Adobe Reader to display manual files
DIAdem installs the base package of Python 3.8 (64-bit) DIAdem also supports Python versions 3.6, 3.7, and 3.9 (64-bit).
Installation Instructions
If Windows Update is enabled, the installation process might hang if Windows Update interferes with the installation of Microsoft Visual C++ 2015 Run-Time. Visit ni.com/r/exjq43 for more information and steps to resolve this issue.
If you purchased this product with an NI Software Suite or NI Product Bundle, use the installation media that shipped with your purchase to install this product.
Use the serial number that is included with your software to activate DIAdem. For more information about how to activate DIAdem, refer to the NI License Manager Help.
Notes on DIAdem 2021
DIAdem 2019 and later versions no longer support the projection of data with color shading or with deformation onto a 3D model of the test object.
As of the DIAdem 2019 installation, the 64-bit version of My DataFinder replaces earlier 32-bit installations. The configuration of My DataFinder takes place in DIAdem versions 2019 or later in DIAdem. In DIAdem versions later than 2019, you configure My DataFinder using the tray icon in the Windows taskbar. C ++ DataPlugins, which are only available in a 32-bit version, need to upgrade to a 64-bit version.
As of DIAdem 2018, you can no longer connect to My DataFinder from a remote computer.
For the MyDataFinder in DIAdem 2021, any index files from earlier DIAdem versions must be regenerated. This occurs automatically when you launch DIAdem. Depending on how many files are to be indexed, this may take quite some time.
Scripts written for the use on SystemLink analysis automation are subject to certain restrictions. Refer to Analysis Automation, General in the Help, for further information.
When you activate DIAdem, you must create a NI user profile at ni.com. The evaluation period is now 7 days without a user profile. If you create a user profile, this period is extended to 45 days.
When using the OPC UA server, a missing Windows update can lead to error messages because functions or DLLs are missing. If this error occurs, check the logfile as to whether a message describes an error in the search path extension. To eliminate this error, install the Windows Update KB2533623 at https://www.microsoft.com/download/details.aspx?id=26767.
When loading a DAC block diagram, DIAdem now checks whether the block diagram contains outdated blocks. The block diagram can still run with these blocks, however the outdated blocks are identified with a label. Please replace these by up-to-date blocks because in future versions the earlier blocks will no longer be supported.
In order to use the following DIAdem drivers the following NI software components must be installed:
Driver | Components | Version |
| ADCS | Automotive Diagnostic Command Set | >= 18.0 |
| DAQmx driver | NI-DAQmx | >= 9.4 |
| ECU MC | ECU Measurement and Calibration Toolkit | >= 18.0 |
| XNET | NI-XNET | >= 15.0 |
Very old commands and variables, which have been replaced by new technologies, are marked as obsolete in DIAdem. This means that these commands and variables are no longer supported in one of the upcoming DIAdem versions. On the DIAdem help page DIAdem»Searching for Obsolete Commands and Variables you can find a script which checks your scripts for obsolete identifiers.
The previously obsolete commands DataCheckChnls and DataSelChn have been permanently removed from DIAdem. Use the Selection collection instead.
If you install an earlier DIAdem version after you have installed the current DIAdem version, the PDF export of the earlier version might not function correctly. You can solve the issue by copying the files acfpdf*.* and cdintf*.dll from the current DIAdem program folder into the program folder of the earlier DIAdem version.
From version 2018 onwards, DIAdem imports VBS DataPlugins in encrypted form by default. You can only import and then process a DataPlugin unencrypted if you select Import DataPlugin in the DataPlugin Settings dialog box.
The images you use in the Picture for Tree SUD property must have a minimum size of 16*16 pixels.
You cannot use VIs that require .NET assemblies from DIAdem through the LVRuntime object.
Compatibility of DIAdem 2021 and DIAdem 2020 SP1
SUD files from DIAdem 2021 cannot be loaded in an earlier DIAdem version.
Notes on Future DIAdem Versions
None
Product Security and Critical Updates
New Features in DIAdem 2021General
The DIAdem icon in the Windows Start menu shows the major version number.
Right-click the buttons to scroll through the tabs in VIEW, REPORT, and SCRIPT to quickly select the tab you want.
DIAdem NAVIGATOR, DataFinder, Data Portal
In the Data Portal, you can pin new channels automatically.
In the Data Portal, you can create video channels by specifying the path to the video file.
DIAdem installs a new DataPlugin that allows you to search for video files in NAVIGATOR and drag and drop them into the Data Portal to create video channels.
DIAdem VIEW
With the new "Bird's Eye View" display type in DIAdem VIEW, you can display radar data, including road course, lane, object list, and sensor fields of view, from a bird's eye perspective. You can synchronize this data with GPS data and the detected objects in the video. Use the playback functions of VIEW to start the bird's eye view display and play back the detected objects, the associated measurement data, and the videos concurrently, or move the cursor to a specific point in time.
As in DIAdem REPORT, you do not need to specify the x-channel in the VIEW display types if the y-channel is an xy-channel.
The coordinates dialog box has been extended with functions for positioning the cursor.
You can now edit all settings of a video in the redesigned video settings dialog box.
In the video display mode, you can also use the new video channels.
You can move or copy VIEW areas using drag and drop. Moving or copying across different worksheets is also possible. When you move or copy an area and position it behind the last worksheet, you can create a new worksheet at the same time.
You can create a video area by dragging and dropping a video channel onto an empty area, or replace an existing video in a video area by dragging a video channel onto that area.
DIAdem Script
The DIAdem Python environment also supports Python version 3.8.
You can specify an external Python IDE and use it to edit Python scripts.
The automatically generated header of new Python files contains commands to activate the external debugger. See the help for a detailed description of how to set up the external debugger.
When creating new scripts, you can choose whether you prefer VBS or Python as the script language.
The short code snippets of the help now show Python code as well as VBS code.
There are new methods for moving or copying VIEW areas with a script.
There are new methods for copying curves in DIAdem VIEW with a script.
The conversion functions for converting one channel type to another have been renamed so that they all start with "ChnConvert", for example, ChnConvertNumericToTime, ChnConvertNumericToWaveform, or ChnConvertTextToAssignment.
The dialog box for selecting files when testing analysis automation procedures for SystemLink TDM is now resizable to allow the use of long file names.
Dialog Editor
The slider control provides you with a new input tool in your user dialogs.
Preview Features
The DIAdem Python environment also supports Python version 3.9.
DIAdem supports complex channels. You can load and save complex channels. You can convert numeric channels to complex channels and vice versa.
The Bus Log Converter also supports the TTTech TTL format.
Accessing the Help
Finding Examples
Automating the Installation of NI Products
Unsupported Windows Operating Systems
Legal Information
Notices are located in the <National Instruments>_Legal Information and <National Instruments> directories.
EULAs are located in the <National Instruments>SharedMDFLegallicense directory.
Review <National Instruments>_Legal Information.txt for information on including legal information in installers built with NI products.