Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活，以下链接可下载：
NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本
http://pcmv.cn/thread-490-1-1.html

视觉论坛的各种资源，除了视觉相关的模块有使用外，大部分的都不会使用，所以仅提供资源不能提供技术支持。资源的下载地址一般会同时提供NI官方地址和百度网盘的下载地址。某些工具包NI的地址失效或没有NI的下载地址，那视觉论坛也没有办法，只能尝试使用百度网盘地址下载；如果百度网盘的下载地址失效过期，可联系论坛客服更新。现在NI的下载服务器对我国IP地址不是很友好，有些时候速度很慢或大的资源下载很容易出错，这样会造成安装过程各种类型报错而无法安装。建议在下载完成后，对下载资源做校验和验证（NI一般会提供MD5或SHA256等），与官方或视觉论坛提供的校验和对比，一致就可以安装，如果不一致，则需要重新下载。视觉论坛早期下载的资源，那时候NI没有这么多限制，基本上都是正常下载的资源；后期下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘，所以百度网盘的资源基本上是正确的。校验和工具下载地址：
文件Hash计算器FHash,文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算
http://pcmv.cn/thread-26524-1-1.html

NI Switch Executive 3.0 Full Download Win32Eng 美国国家仪器开关管理软件3.0完整版下载

Switch Executive是一款开关管理与路由应用软件，能够加速开发过程、简化对复杂开关系统的维护。
Switch Executive提供交互式配置和自动路由功能，使开关系统的设计变得更加容易。您可以为开关模块、外部连接和信号路由分配别名，从而简化系统的文档，以便未来进行修改。使用Switch Executive开发的测试代码可以复用于LabVIEW、LabWindows/CVI、Measurement Studio和TestStand环境。

校验和：
文件大小: 290658848 字节 (277.19 MB)
修改日期: 2008-05-23 04:39
MD5: dfc1c08c526579d8baaaf9c3dd821e1d
SHA1: bdd57316d4603ea79ec74be99e52f0960a6bba6a
SHA256: 8852f7365bbbcd34b887df7be86a4bad3e52a9da1a284178444c1e187ddf997f
CRC32: bf5df923

百度网盘下载地址和NI官方下载地址：
请注册登陆视觉论坛会员，购买附件查看

NI Switch Executive 3.0 Full Download Win32Eng 美国国家仪器开关管理软件3.0完整版下载

http://pcmv.cn/thread-28654-1-1.html?fromuid=9

(出处: 视觉论坛VISIONBBS|视觉之家VISIONHOME)

NI Switch Executive Readme

• New Features in Version 3.0

• Release Notes

• System Requirements

• Installed File Names and Locations

• Software

• Documentation

• Examples
  

• Uninstalling/Modifying NI Switch Executive

• Fixed Issues

• Known Issues

• Changes by Release
  

New Features in Version 3.0

• Support for schematic configuration

• Support for Microsoft Excel spreadsheet import and export

• Support for sharing of route legs

• Performance improvements
  

• Find route is 36% faster for multi-device routes

• Sorting and endpoint selection are faster in MAX
  

Release Notes

• NI Switch Executive 3.0 properly upgrades any existing configurations created with previous versions, however configurations created with 3.0 do not work with previous versions of the software. If you are installing on top of a previous version and you want to be able to use your existing configurations in that previous version, you should first export your configurations to file to save them. After the 3.0 installation is complete, you cannot revert your configurations to a previous version.

• Licensing: At installation, NI Switch Executive defaults to use an evaluation license of the software. Activate the software at Start»All Programs»National Instruments»NI License Manager to enable a fully functional license. Refer to the NI Switch Executive Help for more information about activating your software.
  

System Requirements

Development - Minimum System

• Processor—Pentium III/Celeron 600 MHz or equivalent

• RAM—128 MB

• A screen resolution of 800×600

• Windows XP/2000 or later, with all available critical updates and service packs
  

Development - Recommended System

• Processor—Pentium 4 or equivalent

• RAM—256 MB

• A screen resolution of 1024×768

• Windows Vista/XP/2000 or later, with all available critical updates and service packs
  

Deployment - Minimum System

• Processor—Pentium 200 MHz or equivalent

• RAM—64 MB

• A screen resolution of 800×600 or no screen

• Windows XP/2000 or later, with all available critical updates and service packs
  

Deployment - Recommended System

• Processor—Pentium III/Celeron 600 MHz or equivalent

• RAM—256 MB

• A screen resolution of 1024×768 or no screen

• Windows Vista/XP/2000 or later, with all available critical updates and service packs
  

Installed File Names and LocationsSoftware

Documentation

• NI Switch Executive Readme
  

• NI Switch Executive Getting Started Guide
  

• NI Switch Executive Help
  

Examples

Uninstalling/Modifying NI Switch Executive

• Launch the Control Panel by selecting Start»Control Panel.

• Double-click Add/Remove Programs.

• Select National Instruments Software.

• Click Change/Remove.

• Select NI Switch Executive 3.0 from the dialog box that appears.

• Click Remove to uninstall the product; click Modify to change the components that are installed.
  

• Launch the Control Panel by selecting Start»Control Panel.

• Double-click Programs and Features.

• Select National Instruments Software.

• Click the Uninstall/Change button.

• Select NI Switch Executive 3.0 from the dialog box that appears.

• Click Remove to uninstall the product; click Modify to change the components that are installed.
  

Fixed Issues

Known Issues

• Reverting to NI Switch Executive 1.0 after installing NI Switch Executive 3.0
  This downgrade is not recommended. The 3.0 release resolves several issues in 1.0 that can prevent your application from working with other NI products. Dependencies on subcomponents, such as the IVI Compliance Package (ICP), fail if you downgrade to 1.0.
  If the downgrade to 1.0 is unavoidable, you must uninstall NI Switch Executive 3.0 and the ICP in this order. Refer to Uninstalling NI Switch Executive, then complete the following steps to remove ICP.
  NOTE: After uninstalling ICP, IVI Shared Components remain on the system. To remove the remaining components, you must run the IVI Foundation IVI Shared Component Cleanup Utility mentioned in the steps above. These components are not uninstalled by the Windows uninstallation utility.
  NOTE: If ICP was installed as a requirement for a distribution other than NI Switch Executive 3.0, you cannot uninstall the ICP without uninstalling the dependent product.
  Once NI Switch Executive 3.0 and ICP have been removed, you can run the NI Switch Executive 1.0 installer. Be aware that 1.0 may not work properly with other NI products.

• Select Start»Settings»Control Panel»Add/Remove Programs.

• Select National Instruments Software and click Change.

• Select IVI Compliance Package and click Uninstall.

• Visit www.ivifoundation.org to download the IVI Foundation IVI Shared Component Cleanup Utility.

• Run the IVI Foundation IVI Shared Component Cleanup Utility.
  

• "DLL Not Found" - Microsoft Visual Basic
  When using Microsoft Visual Basic, you may get a "DLL Not Found" error when trying to run your program in the IDE. This problem only occurs in the Visual Basic IDE and only occurs when another process (such as Measurement and Automation Explorer (MAX), for instance) has loaded nise.dll. Workaround 1: Close any other processes that are using nise.dll. This is most commonly MAX. Workaround 2: You should not see this problem if running a compiled Visual Basic executable.
• NI Switch Executive & NI SCXI-1127
  If you are using the NI SCXI-1127 in multiplexer mode configured under Traditional NI-DAQ Devices in MAX, there are a few anomalies exposed by NI Switch Executive.
  NOTE: These anomalies do not exist with the NI SCXI-1127 configured under NI-DAQmx Devices in MAX. If the NI SCXI-1127 is using a multiplexer topology, NI recommends configuring it under NI-DAQmx Devices in MAX.
  First, the NI SCXI-1127 supports different wire modes (1, 2, or 4-wires). Through NI Switch Executive, however, you may only use it with 2-wire channels. Second, the list of channels retrieved from the instrument driver includes all of the channel names as though it was configured as a 1-wire switch. Because of this, half of the channels may appear valid in NI Switch Executive but actually are not. Consult the NI Switches Help file for a list of valid 2-wire channels.
• Changing IVI Configurations After Creating an NI Switch Executive Virtual Device
  The IVI configuration of an IVI switch is read at the time that the switch is added to the NI Switch Executive virtual device. If changes are made to the IVI configuration, such as creating virtual channels, changing default setup to make some channels come up as source or configuration channels, or to change the topology, those changes are not automatically reflected in NI Switch Executive. For NI Switch Executive to recognize the change, you must remove the IVI switch from the NI Switch Executive virtual device and then re-add it. The preferred manner for modifying source and configuration channel attributes is by using the Channels panel of NI Switch Executive in Measurement & Automation Explorer. Using the Channels panel instead of altering the IVI configuration helps you avoid removing and adding an IVI switch to reflect your changes.
• Making changes to NI Switch Executive Virtual Devices via the configuration API
  NI Switch Executive 3.0 provides support for programmatic editing of NISE virtual devices. However, if another process (such as MAX) has opened the same NISE virtual device configuration, the changes you make with the configuration API may not propagate to the other applications accessing the same virtual device. To avoid any data inconsistency issues, do not access the virtual device while it is being modified in another process.
• Hardwiring Excluded Channels/Excluding Hardwired Channels
  NI Switch Executive uses channel exclusions to prevent connections between certain channels. If you associate excluded channels with the same hardwire or if you create an exclusion between two already hardwired channels, NI Switch Executive will not report an exclusion conflict. If your system is indeed wired in this manner, you have created an innate exclusion conflict electrically that NI Switch Executive can not resolve. To prevent innate exclusion conflicts, never wire excluded channels together.

• When you run setup.exe to install the software from the CD, you are prompted to choose whether you want to always trust software from National Instruments. If you do not select this option, your installation may be interrupted by one or more Microsoft Windows security dialog boxes. However, if you run setup from the command line, you will not receive this prompt, and the installer will automatically install NI's Software Publisher Certificate to the your Windows Trusted Publisher Store. If you do not want to make this change to your Windows Trusted Publisher Store, do not choose this installation method.

• NI recommends that you disable Windows power management modes, such as sleep, standby, and hibernate, when using this product. These modes terminate any NI Switch Executive operation in progress. Notice that in Windows Vista or on a laptop computer, the default power management settings are likely to enable sleep mode.
  

Changes by Release3.0 from 2.1.1

• Support for schematic configuration

• Support for Microsoft Excel spreadsheet import and export

• Support for sharing of route legs

• Performance improvements
  

• Find route is 36% faster for multi-device routes

• Sorting and endpoint selection are faster in MAX
  

2.1.1 from 2.1

• Support for Windows Vista. For more information about Microsoft Windows Vista and NI products, refer to ni.com/vista.

• Support for LabVIEW 8.2.1
  

2.1 from 2.0.1

• Support for a programmable interface to manage the NI Switch Executive virtual device. Use the configuration API to programmatically create/edit the switches, channels, hardwires, buses, exclusions, routes, and route groups associated with a virtual device.

• Support for the Route Specification Type.

• Support for the NI Switch Executive Test Panel. Use the Test Panel to test the individual routes and route groups associated with a virtual device.
  

2.0.1 from 2.0

• When specifying multiple routes in a single call to niSE Connect, NISE 2.0 used the same reserved for routing channel to complete every route which resulted in a connection error. For example, if you tried to connect column 1 to column 2, and column 3 to column 4 with the following route specification string "dev1/c1->dev1/c2 & dev1/c3->dev1/c4", the NISE 2.0 routing engine attempted to use the same reserved for routing row to complete both routes. As a result, NISE would return an error when trying to connect the second route. This behavior has been modified to search for an alternative reserved for routing channel when finding paths for concurrent connection requests.

• When upgrading from NISE 1.x to 2.0 or importing a 1.x configuration into NISE 2.0, some routes became invalid. This occurred if the IVI instrument driver for a switch device from your configuration defined some of its channels as IVI Configuration channels. In these cases, NISE 2.0 attempted to convert these IVI configuration channels to NISE reserved for routing channels without rerouting previously configured stored routes. If the stored routes were using an IVI configuration channel as a part of the path, NISE 2.0 reported errors when attempting to connect these routes. NISE 2.0.1 will preserve the IVI configuration channels when upgrading or importing 1.x configurations without breaking existing routes.
  
  If you have already imported your 1.x configuration into NISE 2.0, and your stored routes use IVI configuration channels, you can manually reroute all of the affected routes or upgrade to 2.0.1 and re-import the 1.x configuration.

• When using a deployment license, executables using NISE configurations unexpectedly timed-out after 10 minutes--behavior of an evaluation license. In NISE 2.0.1, activated deployment licenses now take precedence over any evaluation licenses present on the system.

• Fixed an issue where NI Switch Executive can close without warning when using the Volume Licensing Manager (VLM) and the VLM server is unavailable for 12 or more consecutive minutes.
  

• 上篇：LabVIEW Robotics Module Full Download Win32Eng LV机器人模块Robotics历年完整版下载Robotics2009~Robotics2019
• 下篇：NI Switch Executive 3.5 Full Download Win32Eng 美国国家仪器开关管理软件3.5完整版下载
• 标签：NI Switch Executive 3.0NI开关管理软件3.0完整版下载Switch Executive开关管理软件美国国家仪器开关管理软件LabVIEW Switch Executive