Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活，以下链接可下载：
NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本
http://pcmv.cn/thread-490-1-1.html
视觉论坛的各种资源，除了视觉相关的模块有使用外，大部分的都不会使用，所以仅提供资源不能提供技术支持。资源的下载地址一般会同时提供NI官方地址和百度网盘的下载地址。某些工具包NI的地址失效或没有NI的下载地址，那视觉论坛也没有办法，只能尝试使用百度网盘地址下载；如果百度网盘的下载地址失效过期，可联系论坛客服更新。现在NI的下载服务器对我国IP地址不是很友好，有些时候速度很慢或大的资源下载很容易出错，这样会造成安装过程各种类型报错而无法安装。建议在下载完成后，对下载资源做校验和验证（NI一般会提供MD5或SHA256等），与官方或视觉论坛提供的校验和对比，一致就可以安装，如果不一致，则需要重新下载。视觉论坛早期下载的资源，那时候NI没有这么多限制，基本上都是正常下载的资源；后期下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘，所以百度网盘的资源基本上是正确的。校验和工具下载地址：
文件Hash计算器FHash,文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算
http://pcmv.cn/thread-26524-1-1.html
NI FlexLogger 2020R1.1(20.0.1) Win64Eng 美国国家仪器FlexLogger应用软件2020R1.1版ni-flexlogger_20.0.1
FlexLogger是可快速配置传感器和记录混合信号数据的应用软件，用于验证机电系统，而且完全无需编程。
FlexLogger应用软件可帮助您使用NI DAQ硬件构建灵活、可扩展的数据记录系统，而且无需任何编程。您可以使用针对特定传感器的配置工作流程来快速设置、显示和记录来自模拟传感器、数字信号和车载通信总线等测量的同步数据，您还可以通过生成电压、电流或数字信号来驱动执行器或控制设定点，这些信号可以通过事件触发器自动响应不断变化的条件。FlexLogger可自动保存记录测试配置的元数据，以便您可以快速跟踪测试结果并比较多个测试的结果。 您还可以通过集成的数据查看器交互式地查看测试结果，以便直观地检查数据并得出结论。
百度网盘下载地址（限速，请开会员或使用破解限速工具）：
链接: 请注册视觉论坛用户，登陆后购买附件下载查看，充值请联系在线客服 提取码: 请注册登陆视觉论坛会员，购买附件查看
（因为单个文件大于4GB，超出百度网盘文件上限，分割成两个压缩文档分包）
NI官方下载地址（可能无效或无法下载完成）：
请注册登陆视觉论坛会员，购买附件查看
校验和：
(MD5) b580529e7754bb2cde29c25cd05a0c2b
(SHA256) 2e61b2ff4d8ba04845d7e58a53fc62c77afd0272b1b021e4910cf173a94f5686
NI FlexLogger 2020R1.1(20.0.1) Win64Eng 美国国家仪器FlexLogger应用软件2020R1.1版即ni-flexlogger_20.0.1
http://pcmv.cn/thread-24723-1-1.html?fromuid=9
(出处: 视觉论坛VISIONBBS|视觉之家VISIONHOME)
FlexLogger 2020 R1 Readme
January 2020
This file contains important information about FlexLogger, including system requirements, installation instructions, and supported hardware.
Overview
System Requirements
Installation Instructions
Product Security and Critical Updates
New Features
Supported Hardware
Extending FlexLogger with the FlexLogger Plugin Development Kit
Accessing the Help
Changes to Log File Metadata in FlexLogger 2019 R4
Using NI Software with Microsoft Windows 10
Using NI Software with Microsoft Windows 8.1
FlexLogger Drops Support for Windows 7 64-bit in 2021
Legal Information
Overview
FlexLogger is application software for quick sensor configuration and data logging of mixed signals to verify electromechanical systems, all without programming.
Back to Top
System Requirements
FlexLogger has the following minimum system requirements:
Operating System | RAM/Processor | Required Software1 |
| | |
1 Required drivers are included with the FlexLogger installer. 2 NI software installs VC2015 Runtime and .NET 4.6.2. Windows 8.1 requires Microsoft updates to support these items. Refer to Microsoft KB2919442 and KB2919355 for more information about how to install these updates. 3 NI software is signed with a SHA-256 certificate. Windows 7 SP1 requires Microsoft updates to support SHA-256. Refer to Microsoft KB3033929 for more information about how to install this security update. |
Back to Top
Installation Instructions
NI automates FlexLogger installation using NI Package Manager. Visit ni.com/info and enter the Info Code NIPMDownload to download NI Package Manager. Refer to the NI Package Manager Manual for more information about installing, removing, and upgrading NI software using NI Package Manager.
Back to Top
Product Security and Critical Updates
Visit ni.com/security to view and subscribe to receive security notifications about NI products. Visit ni.com/critical-updates for information about critical updates from NI.
Back to Top
New Features2020 R1 (January 2020)
Added PXI Express support for SC Express, sound and vibration, and automotive bus modules. Refer to the Supported Hardware section for specific model information.
Added hardware support for:
Added support for LVDT/RVDT sensors
XY graph type added to Screens
Event triggering on test stop
2019 R4 (September 2019)
Added hardware support for:
Apply zero and null offset calibration to multiple channels simultaneously
Export alarm history to CSV file format
Save project as support for existing projects
Event triggered on test time elapsed
Toast notification support for channel alarms
Integrated system health metric reporting
Digital input support in arithmetic and boolean formulas
Calculation formula support for logarithm functions, ? : operator, and e, true, and false constants
Configurable sample rate for CAN/LIN
Support for custom analysis plugins created with the FlexLogger Plugin Development Kit 1.1
2019 R3 (July 2019)
Added hardware support for the FD-11605
Alarms for input channels, including the following features:
Reset values on output channels
Additional measurement types for counter input modules:
Angular position
Linear position
Pulse
Hardware filter support for FieldDAQ
Support for custom plugins created with the FlexLogger Plugin Development Kit 1.0
Boolean logic for analog channels
Digital input event triggering
Output support for LIN
LIN master support
Offline FlexLogger manual access
Back to Top
Supported Hardware
The following tables detail the hardware models supported in FlexLogger.
CompactDAQ
CompactDAQ Chassis
[td]
NI Product | Model Name | Notes |
| CompactDAQ Chassis | cDAQ-9171 | — |
| cDAQ-9174 | — |
| cDAQ-9178 | — |
| cDAQ-9179 | — |
| cDAQ-9181 | — |
| cDAQ-9184 | — |
| cDAQ-9185 | This chassis supports network synchronization using IEEE 802.1AS protocol. Refer to the Using Network Synchronization in Your Acquisition topic for more information. |
| cDAQ-9188 | — |
| cDAQ-9188XT | — |
| cDAQ-9189 | This chassis supports network synchronization using IEEE 802.1AS protocol. Refer to the Using Network Synchronization in Your Acquisition topic for more information. |
| cDAQ-9191 | — |
C Series Modules
[td]
NI Product | Model Name | Notes |
| C Series Voltage Input Modules | NI 9201 | — |
| NI 9202 | — |
| NI 9205 | — |
| NI 9206 | — |
| NI 9209 | — |
| NI 9215 | — |
| NI 9220 | — |
| NI 9221 | — |
| NI 9222 | — |
| NI 9223 | — |
| NI 9224 | — |
| NI 9225 | — |
| NI 9228 | — |
| NI 9229 | — |
| NI 9238 | — |
| NI 9239 | — |
| NI 9242 | — |
| NI 9244 | — |
| NI 9251 | — |
| NI 9252 | The NI 9252 module supports hardware filtering. Refer to the Reducing Signal Noise topic for more information. |
| C Series Voltage Output Modules | NI 9262 | — |
| NI 9263 | — |
| NI 9264 | — |
| NI 9269 | — |
| C Series Current Input Modules | NI 9203 | — |
| NI 9208 | — |
| NI 9227 | — |
| NI 9246 | — |
| NI 9247 | — |
| NI 9253 | The NI 9253 module supports hardware filtering. Refer to the Reducing Signal Noise topic for more information. |
| C Series Current Output Modules | NI 9265 | — |
| NI 9266 | — |
| C Series Voltage and Current Input Module | NI 9207 | — |
| C Series Sound and Vibration Input Modules | NI 9230 | — |
| NI 9231 | — |
| NI 9232 | — |
| NI 9234 | — |
| NI 9250 | — |
| C Series Temperature Input Modules | NI 9210 | — |
| NI 9211 | — |
| NI 9212 | — |
| NI 9213 | — |
| NI 9214 | — |
| NI 9216 | — |
| NI 9217 | — |
| NI 9226 | — |
| C Series Universal Analog Input Modules | NI 9218 | For the NI 9218, all connectivity accessories must be configured in MAX in order to appear in your FlexLogger project. |
| NI 9219 | — |
| C Series Strain/Bridge Input Modules | NI 9235 | — |
| NI 9236 | — |
| NI 9237 | — |
| C Series Counter Input Module | NI 9361 | FlexLogger supports pull-up resistor functionality and input voltage threshold for the NI 9361. |
| C Series Digital Modules (serial digital I/O) | NI 9375 | The NI 9375 can only use one port (input or output) at a time in a project. You cannot use parallel and serial modules together on the same FlexLogger project unless they are installed in separate cDAQ chassis.
|
| NI 9403 |
| NI 9425 |
| NI 9426 |
| NI 9476 |
| NI 9477 |
| NI 9478 |
| C Series Digital Modules (parallel digital I/O) | NI 9344 | You cannot use parallel and serial modules together on the same FlexLogger project unless they are installed in separate cDAQ chassis. |
| NI 9401 |
| NI 9402 |
| NI 9411 |
| NI 9421 |
| NI 9422 |
| NI 9423 |
| NI 9435 |
| NI 9436 |
| NI 9437 |
| NI 9472 |
| NI 9474 |
| NI 9475 |
| NI 9481 |
| NI 9482 |
| NI 9485 |
| C Series CAN and Vehicle Multiprotocol Interface Modules | NI 9860 | FlexLogger supports all compatible transceiver cables for the NI 9860 (TRC-8542, TRC-8543, and TRC-8546). |
| NI 9861 | — |
| NI 9862 | — |
| C Series LIN Interface Module | NI 9866 | — |
FieldDAQ Devices
[td]
NI Product | Model Name | Notes |
| Voltage Input Devices for FieldDAQ | FD-11601 | External powered sensor configuration is supported in FlexLogger. |
| FD-11603 | Revision B and later of the FD-11603 supports hardware filtering. Refer to the Reducing Signal Noise topic for more information. |
| FD-11605 | — |
| Sound and Vibration Input Devices for FieldDAQ | FD-11634 | — |
| Strain/Bridge Input Devices for FieldDAQ | FD-11637 | Revision B and later of the FD-11637 supports hardware filtering. Refer to the Reducing Signal Noise topic for more information. |
| Temperature Input Devices for FieldDAQ | FD-11613 | — |
| FD-11614 | — |
Note: FieldDAQ devices support network synchronization using IEEE 802.1AS protocol. Refer to the Using Network Synchronization in Your Acquisition topic for more information. Note: FieldDAQ devices support hardware filtering. Refer to the Reducing Signal Noise topic for more information. (See Notes column for exceptions.) |
PXI Express
PXI Chassis
[td]
NI Product | Notes |
| PXIe-1062Q | FlexLogger does not support any module used in a PXI peripheral slot. |
| PXIe-1065 |
| PXIe-1066DC |
| PXIe-1073 | — |
| PXIe-1075 | — |
| PXIe-1078 | — |
| PXIe-1082 | — |
| PXIe-1082DC | — |
| PXIe-1084 | — |
| PXIe-1085 (12 GB/s and 24GB/s) | — |
| PXIe-1092 | — |
| PXIe-1095 | — |
PXI Controllers
Supported embedded controllers must meet the minimum system requirements. Refer to the System Requirements section for more information.
PXI Modules
[td]
NI Product | Model Name | Compatible Accessories | Notes |
| PXI Analog Input Modules | PXIe-4300 | | — |
| PXIe-4302 | | — |
| PXIe-4303 | | — |
| PXIe-4304 | | — |
| PXIe-4305 | | — |
| PXIe-4309 | | — |
| PXIe-4310 | | — |
| PXIe-4481 | — | — |
| PXI Strain/Bridge Input Module | PXIe-4330 | | — |
| PXIe-4331 | | — |
| PXIe-4339 | TB-4339 TB-4339B TB-4339C RM-4339
| — |
| PXI Displacement Input Module | PXIe-4340 | | — |
| PXI Temperature Input Module | PXIe-4353 | | — |
| PXIe-4357 | | — |
| PXI Analog Output Module | PXIe-4322 | | — |
| PXI Sound and Vibration Modules | PXIe-4464 | — | — |
| PXIe-4480 | — | FlexLogger 2020 R1 does not support the Charge measurement type. |
| PXIe-4492 | — | FlexLogger automatically selects the Medium (100 Hz) data rate for the PXIe-449x. Using data rates between 1,000 Hz and 8,000 Hz with the PXIe-449x may cause delays when configuring channels. |
| PXIe-4496 | — |
| PXIe-4497 | — |
| PXIe-4498 | — |
| PXIe-4499 | — |
| PXI Vehicle Multiprotocol Interface Module | PXIe-8510 (2-Port and 6-port) | | — |
| PXI CAN Interface Module | PXI-8512 (1-port and 2-port) | — | Must be used in a PXIe Hybrid Compatible slot of a supported PXI Express chassis. For additional information on PXI compatibility with PXI Express chassis, visit ni.com/r/pxicompatibility. |
| PXI LIN Interface Module | PXI-8516 | — |
| Note: FlexLogger does not currently support synchronization between multiple chassis or other devices in the system. |
USB Devices
[td]
NI Product | Model Name | Notes |
| CAN Interface Devices | USB-8502 | — |
| LIN Interface Devices | USB-8506 | — |
Back to Top
Extending FlexLogger with the FlexLogger Plugin Development Kit
You can extend the functionality of FlexLogger (version 2019 R4 or higher) by creating and importing a custom plugin using the FlexLogger Plugin Development Kit (version 1.1). The FlexLogger Plugin Development Kit is available for download in NI Package Manager. Refer to the FlexLogger Plugin Development Kit 1.1 Readme for more information.
Back to Top
Accessing the Help
The online FlexLogger manual contains the most current help for your product version. Refer to the FlexLogger Manual, accessible from Help»FlexLogger manual, for more information about using FlexLogger.
Users without online access can choose to use an offline version of the FlexLogger manual. To enable the use of the offline FlexLogger manual, go to File»Preferences»General and select Always use offline manual.
Back to Top
Changes to Log File Metadata in FlexLogger 2019 R4
In FlexLogger 2019 R4, metadata properties organized as a hierarchy are defined by a tilde (~) character between properties. Previous FlexLogger versions used a double greater symbol (>>) to separate these metadata properties. Any data post-processing configured to use >> may produce unexpected results.
Back to Top
Using NI Software with Microsoft Windows 10
Microsoft Windows 10 is the latest version of the Windows operating system and features significant changes compared to previous versions. Windows 10 introduces several new capabilities and also combines features from both Windows 7 and Windows 8. For more information about NI support for Windows 10, visit ni.com/windows10.
Back to Top
Using NI Software with Microsoft Windows 8.1
When you install NI software on Microsoft Windows 8.1, you will notice a few additional tiles in the Apps view, including shortcuts to NI application software products such as NI LabVIEW, Measurement & Automation Explorer (NI MAX), and NI Launcher. For more information about NI support for Windows 8.1, visit ni.com/windows8.
Back to Top
FlexLogger Drops Support for Windows 7 (64-Bit)
FlexLogger will drop support for Windows 7 (64-bit) operating systems starting in 2021. Versions of this product that ship after May 1, 2021, will not install or run on this operating system. For detailed information about NI operating system support, visit ni.com/r/windows764bit.
Back to Top
Legal Information
Copyright
© 2017–2020 National Instruments. All rights reserved.
Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
NI respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
End-User License Agreements and Third-Party Legal Notices
You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:
Notices are located in the <National Instruments>_Legal Information and <National Instruments> directories.
EULAs are located in the <National Instruments>SharedMDFLegallicense directory.
Review <National Instruments>_Legal Information.txt for information on including legal information in installers built with NI products.
U.S. Government Restricted Rights
If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.
IVI Foundation Copyright Notice
Content from the IVI specifications reproduced with permission from the IVI Foundation.
The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
Trademarks
Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on NI trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.
Patents
For patents covering the NI products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the NI Patent Notice at ni.com/patents.
377046H-01
