石鑫华视觉 手机微信QQ:13450001061 / 18038383457

下载中心

LabVIEW 2013 SP1 FPGA Module Win32Eng LabVIEW2013SP1FPGA模块LVFPGA2013SP1英文版

文章来源:石鑫华视觉网时间:2022-04-28 11:25:29 点击:204

Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活，以下链接可下载：
NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本
http://pcmv.cn/thread-490-1-1.html

视觉论坛的各种资源，除了视觉相关的模块有使用外，大部分的都不会使用，所以仅提供资源不能提供技术支持。资源的下载地址一般会同时提供NI官方地址和百度网盘的下载地址。某些工具包NI的地址失效或没有NI的下载地址，那视觉论坛也没有办法，只能尝试使用百度网盘地址下载；如果百度网盘的下载地址失效过期，可联系论坛客服更新。现在NI的下载服务器对我国IP地址不是很友好，有些时候速度很慢或大的资源下载很容易出错，这样会造成安装过程各种类型报错而无法安装。建议在下载完成后，对下载资源做校验和验证（NI一般会提供MD5或SHA256等），与官方或视觉论坛提供的校验和对比，一致就可以安装，如果不一致，则需要重新下载。视觉论坛早期下载的资源，那时候NI没有这么多限制，基本上都是正常下载的资源；后期下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘，所以百度网盘的资源基本上是正确的。校验和工具下载地址：
文件Hash计算器FHash,文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算
http://pcmv.cn/thread-26524-1-1.html

LabVIEW 2013 SP1 FPGA Module Win32Eng LabVIEW2013SP1FPGA模块LVFPGA2013SP1英文版

NI LabVIEW FPGA模块可帮助您开发和调试自定义硬件逻辑，并部署到NI FPGA硬件上。
LabVIEW FPGA是LabVIEW的一个软件附件，您可以通过高度集成的开发环境、IP库、高保真模拟器和调试功能，更高效地设计基于FPGA的系统。您可以创建FPGA VI，将I/O直接访问与用户定义的LabVIEW逻辑相结合，为数字协议通信、硬件在环仿真和快速控制原型等应用定义自定义硬件。虽然LabVIEW FPGA模块包含许多内置信号处理程序，但您也可以集成现有的硬件描述语言（HDL）代码以及第三方IP。

FPGA从2018版开始，提供64位版本和32位版本。而之前的则只有32位版本。64位版本的，仅有英文版。而32位版本的，则通常会有英文版、日文版、中文版等。本论坛大部分的日文版不提供下载（有少数几个没有找到中文版的有提供日文版）。部分年代版本的，则没有中文版的资源，请使用英文版。

百度网盘下载地址（限速，请开会员或使用破解限速工具）：
请注册视觉论坛会员，登陆购买附件查看，充值请联系在线客服

NI官方下载地址（可能无效或无法下载完成）：
请注册视觉论坛会员，登陆购买附件查看，充值请联系在线客服

LabVIEW 2013 SP1 FPGA Module Win32Eng LabVIEW2013SP1FPGA模块LVFPGA2013SP1英文版

http://pcmv.cn/thread-24657-1-1.html?fromuid=9

(出处: 视觉论坛VISIONBBS|视觉之家VISIONHOME)



校验和：
MD5: b04b2dee4a18f78c35bfd056cc3f0c87
SHA1: bad28e00d9c9fb637e770e071770f9472673567b
SHA256: 8edf7538525007b2f7b534968bdda7cb5b2c58ab600014d6310a2b2a17afd1aa
CRC32: 1c46992a

LabVIEW 2013 SP1 FPGA Module Readme

Version 13.0.1


December 2013


This file contains important information about the LabVIEW FPGA Module, including installation instructions, known issues, and a partial list of bugs fixed for LabVIEW 2013 SP1 FPGA Module.


System Requirements
Installation Instructions
Product Security and Critical Updates
Known Issues
Bug Fixes
Accessing the Help
Automating the Installation of NI Products
NI LabVIEW FPGA Module Drops Support for Microsoft Windows Vista, Windows XP, and Windows Server 2003 in 2016
Important Information

System Requirements

The development computer is a PC or NI PXI/PXI Express system on which you install LabVIEW and the LabVIEW FPGA Module. You can use this computer to compile FPGA VIs, but if the FPGA design or target requires more than 2 GB of memory, National Instruments recommends installing the LabVIEW FPGA compilation tools on a separate computer. This computer is referred to as the remote compile server.


Development Computer

  • LabVIEW 2013 SP1 Full or Professional Development Systems (32-bit)

  • 1.2 GHz Pentium processor or equivalent

  • 11 GB additional disk space

  • Memory1:

    • At least 3 GB of RAM for Virtex-5 and earlier FPGA targets

    • At least 4 GB of RAM for Virtex-6 and later2 FPGA targets

  • One of the following operating systems:
    Note: The LabVIEW 2013 SP1 FPGA Module does not support Windows 8 or Windows 8.1.

    • Windows 7 (32-bit)

    • Windows 7 (64-bit with 32-bit LabVIEW installed)

    • Windows Vista (32-bit)

    • Windows Vista (64-bit with 32-bit LabVIEW installed)

    • Windows XP Pro (Service Pack 3)

    • Windows Server 2003 R2 (32-bit)3

    • Windows Server 2008 R2 (64-bit with 32-bit LabVIEW installed)

    • Windows Server 2012 R2 (64-bit with 32-bit LabVIEW installed)

  • FPGA device

  • Device driver software—To program most devices with the LabVIEW 2013 SP1 FPGA Module, install the NI-RIO 13.1 driver software. Refer to the hardware documentation for different requirements for a specific device.

1Memory requirements vary according to both the FPGA target and the FPGA VI you create for that target. To determine your memory needs, monitor the memory usage of the xst.exe process in the Windows Task Manager.


2You must use a 64-bit OS to address 4 GB of RAM.


3The LabVIEW FPGA Module does not support the Windows Server non-R2 editions.


Installation Instructions

You can install all of your LabVIEW products—including the FPGA Module–using the LabVIEW 2013 SP1 Platform DVDs. You can find installation instructions for the FPGA Module along with activation instructions in the following locations:


  • LabVIEW FPGA Module Release and Upgrade Notes, which are available in your FPGA Module software kit or online at ni.com/manuals.

  • LabVIEW 2013 SP1 Installation Guide, which is available in your LabVIEW software kit.

  • LabVIEW 2013 SP1 Platform DVDs Readme, which is available on the top-level of LabVIEW Platform DVD 1.

  • Activation Instructions for National Instruments Software, which are available on the LabVIEW installation media.

To request additional LabVIEW 2013 SP1 Platform DVDs, refer to the National Instruments website.


Note: If you purchased this product with an NI Software Suite or NI Product Bundle, use the installation media that shipped with your purchase to install this product.


Product Security and Critical Updates

National Instruments posts information about critical updates and security notifications on ni.com. Visit ni.com/info and enter Info Code updates to access this information.


Known Issues

You can access the software and documentation known issues list online. Refer to the National Instruments website for an up-to-date list of known issues in the FPGA Module.


Bug Fixes

The following items are the IDs and titles of a subset of issues fixed in the LabVIEW 2013 SP1 FPGA Module. This is not an exhaustive list of issues fixed in the current version of the LabVIEW 2013 SP1 FPGA Module. If you have a CAR ID, you can search this list to validate the issue has been fixed.


ID
Fixed Issue
413898Coercion dots on Invoke Methods cause LabVIEW to require saving without any code changes.
418820Desktop Execution node does not recognize controls inside a tab control.
421382While loops with loop timer can overflow waveform type and cause graph control draw to hang.
421717[Sampling Probes] Sampling sources on while loops in the FPGA context can hang the VI's execution.
421750[Sampling Probes] Multiple reruns of the VI with sampling probes can cause a loss of waveform graph formatting.
422537[Sampling Probes] Placing a sampling probe under the FPGA sampling source when the FPGA VI is free running can cause LabVIEW to crash.
422548LabVIEW can crash if Open Dynamic Bitfile Reference node is used under certain circumstances.
424257Reentrancy settings of some FPGA VIs causing poor performance with FPGA project load and memory usage.
425084[Linear Algebra] Matrix Transpose function is showing wrong Throughput information in the context help.
426585Configuring a memory project item while the FPGA VI using the memory is not open causes the memory to not take the project item changes.
427033Using <+-,32,16> fixed point values in the LabVIEW 2013 FPGA Module can cause VI corruption.
431290FIFO datatype may not be updated properly.
435147Data corruption issue for a To FXP conversion on FPGA.

Accessing the Help

Refer to the LabVIEW Help, accessible by selecting Help»LabVIEW Help from LabVIEW, for information about the LabVIEW 2013 SP1 FPGA Module.


Automating the Installation of NI Products

You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes. However, starting with the August 2012 releases (products using NI Installers version 3.1 or later), you may need to perform additional steps before or during a silent installation of NI software.


If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software.


For more information about automating the installation of NI products, refer to the following KnowledgeBase articles:


  • For more information on silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.

  • For more information on silent installations of suited NI products, such as NI Developer Suite, refer to KB 4GGGDQH0, Automating the Installation of a Suited Installer.

  • To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My National Instruments Installer?.

NI LabVIEW FPGA Module Drops Support for Microsoft Windows Vista, Windows XP, and Windows Server 2003 in 2016

The National Instruments LabVIEW FPGA Module will drop support for Microsoft Windows Vista, Windows XP, and Windows Server 2003 as of July 1, 2016. Versions of the LabVIEW FPGA Module that ship after July 1, 2016 will not install or run on Windows Vista, Windows XP, or Windows Server 2003. For detailed information about NI application software product life cycles, visit ni.com/info and enter one of the following Info Codes:


ProductInfo Code
NI LabVIEWlifecycle
NI LabWindows™/CVI™cvi_lifecycle
NI Measurement Studiomstudiolifecycle
NI TestStandtslcp
NI DIAdemddlcp
NI SignalExpressselcp
NI VeriStandnivslifecycle

Legal Information

Copyright


© 2003–2013 National Instruments. All rights reserved.


Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.


National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.


Third-Party Copyright Notices


The SharpZipLib_Notice.pdf file contains a third-party copyright notice for third-party components used by certain FPGA Module features. The following directory is the default installation location for the file, but the location might vary depending on the configuration of the local computer:

National InstrumentsLabVIEW 2013FPGALegal


The Python_2.5_notice.pdf file contains a third-party copyright notice for third-party components used by certain FPGA Module features. The following directory is the default installation location for the file, but the location might vary depending on the configuration of the local computer:

National InstrumentsLabVIEW 2013FPGALegal


End-User License Agreements and Third-Party Legal Notices


You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:


  • Notices are located in the <National Instruments>_Legal Information and <National Instruments> directories.

  • EULAs are located in the <National Instruments>SharedMDFLegallicense directory.

  • Review <National Instruments>_Legal Information.txt for information on including legal information in installers built with NI products.

Trademarks


Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on National Instruments trademarks. Xilinx® is a registered trademark of Xilinx, Inc. Other product and company names mentioned herein are trademarks or trade names of their respective companies.


Patents


For patents covering the National Instruments products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.


首页
84162741QQ
联系