Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活，以下链接可下载：
NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本
http://pcmv.cn/thread-490-1-1.html
视觉论坛的各种资源，除了视觉相关的模块有使用外，大部分的都不会使用，所以仅提供资源不能提供技术支持。资源的下载地址一般会同时提供NI官方地址和百度网盘的下载地址。某些工具包NI的地址失效或没有NI的下载地址，那视觉论坛也没有办法，只能尝试使用百度网盘地址下载；如果百度网盘的下载地址失效过期，可联系论坛客服更新。现在NI的下载服务器对我国IP地址不是很友好，有些时候速度很慢或大的资源下载很容易出错，这样会造成安装过程各种类型报错而无法安装。建议在下载完成后，对下载资源做校验和验证（NI一般会提供MD5或SHA256等），与官方或视觉论坛提供的校验和对比，一致就可以安装，如果不一致，则需要重新下载。视觉论坛早期下载的资源，那时候NI没有这么多限制，基本上都是正常下载的资源；后期下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘，所以百度网盘的资源基本上是正确的。校验和工具下载地址：
文件Hash计算器FHash,文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算
http://pcmv.cn/thread-26524-1-1.html
LabVIEW 2010 SP1 FPGA Module Win32Eng LabVIEW2010SP1FPGA模块LVFPGA2010SP1英文版
NI LabVIEW FPGA模块可帮助您开发和调试自定义硬件逻辑，并部署到NI FPGA硬件上。
LabVIEW FPGA是LabVIEW的一个软件附件，您可以通过高度集成的开发环境、IP库、高保真模拟器和调试功能，更高效地设计基于FPGA的系统。您可以创建FPGA VI，将I/O直接访问与用户定义的LabVIEW逻辑相结合，为数字协议通信、硬件在环仿真和快速控制原型等应用定义自定义硬件。虽然LabVIEW FPGA模块包含许多内置信号处理程序，但您也可以集成现有的硬件描述语言（HDL）代码以及第三方IP。
FPGA从2018版开始，提供64位版本和32位版本。而之前的则只有32位版本。64位版本的，仅有英文版。而32位版本的，则通常会有英文版、日文版、中文版等。本论坛大部分的日文版不提供下载（有少数几个没有找到中文版的有提供日文版）。部分年代版本的，则没有中文版的资源，请使用英文版。
百度网盘下载地址（限速，请开会员或使用破解限速工具）：
EXE版和ZIP版内容一样，仅压缩格式不同。EXE为NI当年发行版，ZIP版为后期NI重新压制版。
EXE版：
链接: 请注册视觉论坛用户，登陆后购买附件下载查看，充值请联系在线客服 提取码: 请注册登陆视觉论坛会员，购买附件查看
ZIP版：
链接: 请注册视觉论坛用户，登陆后购买附件下载查看，充值请联系在线客服 提取码: 请注册登陆视觉论坛会员，购买附件查看
NI官方下载地址（可能无效或无法下载完成）：
EXE版：
请注册登陆视觉论坛会员，购买附件查看
ZIP版：
请注册登陆视觉论坛会员，购买附件查看
LabVIEW 2010 SP1 FPGA Module Win32Eng LabVIEW2010SP1FPGA模块LVFPGA2010SP1英文版
http://pcmv.cn/thread-24644-1-1.html?fromuid=9
(出处: 视觉论坛VISIONBBS|视觉之家VISIONHOME)
LabVIEW 2010 SP1 FPGA Module Readme
Version 10.0.1
December 2010
This file contains important information about the LabVIEW FPGA Module.
Installation
You can install all of your LabVIEW products—including the FPGA Module–using the LabVIEW 2010 Platform DVDs. You can find installation instructions for the FPGA Module along with activation instructions in the following locations:
LabVIEW FPGA Module Release and Upgrade Notes, which are available in your FPGA Module software kit or online at ni.com/manuals.
LabVIEW Release Notes, which are available in your LabVIEW software kit.
LabVIEW 2010 Platform DVDs Readme, which is available on the top-level of LabVIEW Platform DVD 1.
To request additional LabVIEW 2010 Platform DVDs, refer to the National Instruments Web site.
Note: If you purchased this product with an NI Software Suite or NI Product Bundle, use the installation media that shipped with your purchase to install this product.
Known Issues
You can access the software and documentation known issues list online. Refer to the National Instruments Web site for an up-to-date list of known issues in the FPGA Module.
Bug Fixes
The following items are the IDs and titles of a subset of issues fixed in the FPGA Module 2010.
| Bug ID | Fixed Issue |
| 252316 | Cannot upload large files to remote compile server. |
| 243639 | Error when compiling simulation libraries with ModelSim 6.6a. |
| 237816 | 6 functions give incorrect results when fractional word lengths of inputs don't match. |
| 244920 | Broken FPGA read/write node when switching an FPGA reference from static to dynamic mode. |
| 238765 | Read/write node does not report register timeout error when FPGA reference is in dynamic mode. |
| 233069 | If an FPGA dynamic reference wire looks for a missing bitfile path, the VI opens as modified even after being saved. |
| 240183 | If an FPGA reference is in dynamic mode, the "Writer FIFO.Get Peer To Peer Writer" and "Reader FIFO.Get Peer To Peer Reader" methods are not supported. |
Copyright
© 2003–2010 National Instruments Corporation. All rights reserved.
I. Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
II. Third-Party Copyright Notices
The SharpZipLib_Notice.pdf file contains a third-party copyright notice for third-party components used by certain FPGA Module features. The following directory is the default installation location for the file, but the location might vary depending on the configuration of the local computer:
National InstrumentsFPGACompileWorkerSharpZipLib LicenseCopyright Information
The Python_2.5_notice.pdf file contains a third-party copyright notice for third-party components used by certain FPGA Module features. The following directory is the default installation location for the file, but the location might vary depending on the configuration of the local computer:
National InstrumentsLabVIEW 2010FPGALegal
Trademarks
National Instruments, NI, ni.com, and LabVIEW are trademarks of National Instruments Corporation. Refer to the Terms of Use section on ni.com/legal for more information about National Instruments trademarks.
Xilinx® is a registered trademark of Xilinx, Inc.
Other product and company names mentioned herein are trademarks or trade names of their respective companies.
Patents
For patents covering the National Instruments products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.
