Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活，以下链接可下载：
NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本
http://pcmv.cn/thread-490-1-1.html
视觉论坛的各种资源，除了视觉相关的模块有使用外，大部分的都不会使用，所以仅提供资源不能提供技术支持。资源的下载地址一般会同时提供NI官方地址和百度网盘的下载地址。某些工具包NI的地址失效或没有NI的下载地址，那视觉论坛也没有办法，只能尝试使用百度网盘地址下载；如果百度网盘的下载地址失效过期，可联系论坛客服更新。现在NI的下载服务器对我国IP地址不是很友好，有些时候速度很慢或大的资源下载很容易出错，这样会造成安装过程各种类型报错而无法安装。建议在下载完成后，对下载资源做校验和验证（NI一般会提供MD5或SHA256等），与官方或视觉论坛提供的校验和对比，一致就可以安装，如果不一致，则需要重新下载。视觉论坛早期下载的资源，那时候NI没有这么多限制，基本上都是正常下载的资源；后期下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘，所以百度网盘的资源基本上是正确的。校验和工具下载地址：
文件Hash计算器FHash,文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算
http://pcmv.cn/thread-26524-1-1.html
LabVIEW 2013 FPGA Compile Farm Toolkit Win32Eng LabVIEW2013FPGA集群编译工具包FPGA-CFT2013
LabVIEW FPGA Compile Farm工具包可帮助您创建现场服务器，轻松管理FPGA编译。
LabVIEW FPGA Compile Farm工具包可帮助您创建现场服务器，轻松管理FPGA编译。用户可根据需要连接多台编译计算机；中央服务器软件负责管理并行编译和队列之外的集群部署(farming)。为了帮助用户缩短FPGA编译时间，该工具包还可支持Linux编译服务器计算机。
文件大小: 224817952 字节 (214.40 MB)
修改日期: 2013-07-12 23:35
MD5: 73f771b1e1189fa3a1aaa1ef6ee0e649(官方正确)
SHA1: 348b8354b28576f9911ffaf6413c1b647703f949
SHA256: 1b1d0bb5189a41a2331f14959cebd6767e6d610d38039e8972c9d8c5fd22c7ac
CRC32: 2967901c
百度网盘下载地址（限速，请开会员或使用破解限速工具）：
链接: 请注册视觉论坛用户，登陆后购买附件下载查看，充值请联系在线客服 提取码: 请注册登陆视觉论坛会员，购买附件查看
NI官方下载地址（可能无效或无法下载完成）：
下载地址1：
请注册登陆视觉论坛会员，购买附件查看
下载地址2：
请注册登陆视觉论坛会员，购买附件查看
LabVIEW 2013 FPGA Compile Farm Toolkit Win32Eng LabVIEW2013FPGA集群编译工具包FPGA-CFT2013
http://pcmv.cn/thread-24622-1-1.html?fromuid=9
(出处: 视觉论坛VISIONBBS|视觉之家VISIONHOME)
LabVIEW 2013 FPGA Compile Farm Toolkit Readme
Version 13.0.0
June 2013
This file contains important information about the LabVIEW FPGA Compile Farm Toolkit, including:
Overview
System Requirements
Installation and Activation Instructions
Getting Started
Known Issues
Automating the Installation of NI Products
NI LabVIEW FPGA Compile Farm Toolkit Drops Support for Microsoft Windows Vista, Windows XP, and Windows Server 2003 in 2016
Important Information
Overview
With the FPGA Compile Farm Toolkit you can compile multiple FPGA VIs simultaneously as well as monitor and manage the compilation queue remotely. You also can install compile workers on different computers and let the FPGA compile server manage all available compile workers on the network and load balance compilation requests. The compile server can reschedule the compilation job to a different compile worker if a compile worker becomes inoperable during a compilation.
System Requirements
The compile farm server, which is the computer on which you install the FPGA Compile Farm Toolkit, must meet the following minimum system requirements:
Installation and Activation Instructions
You can install all of your LabVIEW products—including the FPGA Compile Farm Toolkit—using the LabVIEW 2013 Platform DVDs. You can find installation instructions for the FPGA Compile Farm Toolkit along with activation instructions in the following locations:
LabVIEW Installation Guide, which is available on the LabVIEW installation media.
LabVIEW 2013 Platform DVDs Readme, which is available on the top-level of LabVIEW Platform DVD 1.
To request additional LabVIEW 2013 Platform DVDs, refer to the National Instruments website at ni.com.
Note: If you purchased this product with an NI Software Suite or NI Product Bundle, use the installation media that shipped with your purchase to install this product.
Getting Started
Refer to the Getting Started with the FPGA Compile Farm document, available by selecting Start»All Programs»National Instruments»FPGA»Getting Started with the FPGA Compile Farm, for information about setting up and using the FPGA compile farm.
Known Issues
You can access the software and documentation known issues list online. Refer to the National Instruments website at ni.com for an up-to-date list of known issues in the FPGA Compile Farm Toolkit.
Automating the Installation of NI Products
You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes. However, starting with the August 2012 releases (products using NI Installers version 3.1 or later), you may need to perform additional steps before or during a silent installation of NI software.
If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software.
For more information, refer to the following KnowledgeBase articles:
For more information on silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.
For more information on silent installations of suited NI products, such as NI Developer Suite, refer to KB 4GGGDQH0, Automating the Installation of a Suited Installer.
To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My National Instruments Installer?.
NI LabVIEW FPGA Compile Farm Toolkit Drops Support for Microsoft Windows Vista, Windows XP, and Windows Server 2003 in 2016
The National Instruments LabVIEW FPGA Compile Farm Toolkit will drop support for Microsoft Windows Vista, Windows XP, and Windows Server 2003 as of July 1, 2016. Versions of the LabVIEW FPGA Module that ship after July 1, 2016 will not install or run on Windows Vista, Windows XP, or Windows Server 2003. For detailed information about NI application software product life cycles, visit ni.com/info and enter one of the following Info Codes:
| Product | Info Code |
| NI LabVIEW | lifecycle |
| NI LabWindows™/CVI™ | cvi_lifecycle |
| NI Measurement Studio | mstudiolifecycle |
| NI TestStand | tslcp |
| NI DIAdem | ddlcp |
| NI SignalExpress | selcp |
| NI VeriStand | nivslifecycle |
Important Information
Copyright
© 2011–2013 National Instruments. All rights reserved.
Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
End-User License Agreements and Third-Party Legal Notices
You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:
Notices are located in the <National Instruments>_Legal Information and <National Instruments> directories.
EULAs are located in the <National Instruments>SharedMDFLegallicense directory.
Review <National Instruments>_Legal Information.txt for information on including legal information in installers built with NI products.
Trademarks
Refer to the NI Trademark and Logo Guidelines at ni.com/trademarks for information on National Instruments trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.
Patents
For patents covering the National Instruments products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.
