Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活，以下链接可下载：
NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本
http://pcmv.cn/thread-490-1-1.html
视觉论坛的各种资源，除了视觉相关的模块有使用外，大部分的都不会使用，所以仅提供资源不能提供技术支持。资源的下载地址一般会同时提供NI官方地址和百度网盘的下载地址。某些工具包NI的地址失效或没有NI的下载地址，那视觉论坛也没有办法，只能尝试使用百度网盘地址下载；如果百度网盘的下载地址失效过期，可联系论坛客服更新。现在NI的下载服务器对我国IP地址不是很友好，有些时候速度很慢或大的资源下载很容易出错，这样会造成安装过程各种类型报错而无法安装。建议在下载完成后，对下载资源做校验和验证（NI一般会提供MD5或SHA256等），与官方或视觉论坛提供的校验和对比，一致就可以安装，如果不一致，则需要重新下载。视觉论坛早期下载的资源，那时候NI没有这么多限制，基本上都是正常下载的资源；后期下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘，所以百度网盘的资源基本上是正确的。校验和工具下载地址：
文件Hash计算器FHash,文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算
http://pcmv.cn/thread-26524-1-1.html
NI VeriStand 2011SP1 Win32Eng PC版完整版及运行版NIVS2011SP1
VeriStand是一款用于激励生成、数据采集和计算通道等实时测试应用且具有自定义通道换算功能的软件。
VeriStand应用软件可帮助您为NI实时硬件配置I/O通道、数据记录、激励生成和主机通信。您还可以导入仿真模型和控制算法，通过可配置的警报来响应事件，并通过宏录制、TestStand、.NET和其他软件实现测试自动化。您可以使用运行时可编辑的用户界面，监测应用程序数据、警报状态和系统执行指标，并进行交互。虽然使用VeriStand不需要掌握编程知识，但您也可以使用各种编程软件环境（如LabVIEW、ANSI C/C ++、Python和ASAM XIL）来为VeriStand添加自定义功能。
VeriStand2018SP1及以前的早期版本，为32位版本。VeriStand2019及以后更新版本，为64位版本。但是同一年代并不能同时具有32/64位版本。
百度网盘下载地址（限速，请开会员或使用破解限速工具）：
链接: 请注册视觉论坛用户，登陆后购买附件下载查看，充值请联系在线客服 提取码: 请注册登陆视觉论坛会员，购买附件查看
NI官方下载地址（可能无效或无法下载完成）：
请注册登陆视觉论坛会员，购买附件查看
NI VeriStand 2011SP1 Win32Eng PC版完整版及运行版NIVS2011SP1
http://pcmv.cn/thread-24457-1-1.html?fromuid=9
(出处: 视觉论坛VISIONBBS|视觉之家VISIONHOME)
NI VeriStand 2011 SP1 Readme
May 2012
This file contains important information about NI VeriStand 2011 SP1, including system requirements and installation instructions.
Overview
System Requirements
Simulation Models
Real-Time Targets
LabVIEW
.NET
Installation Instructions
Accessing the Help
Finding Examples
Known Issues
Bug Fixes
Automating the Installation of NI Products
Overview
NI VeriStand is configuration-based testing software, allowing you to develop, prototype, and test control systems using hardware I/O and your simulation models. The NI VeriStand software framework enables you to perform real-time or PC-based test configuration and execution that can be easily customized and extended with LabVIEW, NI TestStand, and other software tools.
NI VeriStand includes a run-time editable user interface as well as a test manager you can use to configure and implement triggered multi-file data logging, real-time test sequencing, stimulus generation and playback, and model calibration.
System Requirements
You can run the NI VeriStand installer on the following operating systems:
Windows 7 (32-bit and 64-bit)
Windows Vista (32-bit and 64-bit)
Windows XP Service Pack 3 (32-bit)
Windows Server 2003 R2 (32-bit)
Windows Server 2008 R2 (64-bit)
NI VeriStand runs as a 32-bit application on all operating systems.
Note Support for Windows Server 2003 R2 may require disabling physical address extensions (PAE). To learn how this might affect your use of Windows Server 2003 and what actions you might have to take, visit ni.com/info and enter the info code PAESupport.
NI VeriStand does not support Windows 2000/NT/Me/98/95, Windows XP x64, Windows XP Service Pack 1, or the Windows Server non-R2 editions.
Simulation Models
To configure and run a simulation using your existing compiled model, you need only NI VeriStand installed.
To develop a model using The MathWorks, Inc. Simulink® application software, you must be a licensed user of and have the following software installed on the host computer:
The MathWorks, Inc. MATLAB® software (the 32-bit version) and The MathWorks, Inc Simulink® application software release 14.x, 2006a, 2006b, 2007a, 2007b, 2008a, 2008b, 2009a, 2009b, 2010a, 2010b, or 2011a (the 32-bit version).
Note NI VeriStand does not support the 64-bit versions of the MathWorks, Inc. MATLAB® software or The MathWorks, Inc Simulink® application software.
To compile a model developed using The MathWorks, Inc. Simulink® application software for use on a Microsoft Windows or LabVIEW Real-Time Target, you must be a licensed user of and have the following software installed on the host computer:
The MathWorks, Inc. Real-Time Workshop® (Simulink Coder®) software release 14.x, 2006a, 2006b, 2007a, 2007b, 2008a, 2008b, 2009a, 2009b, 2010a, 2010b, or 2011a.
For deploying a compiled model to a LabVIEW Real-Time target, the following compilers are tested and supported:
Microsoft Visual C++ 6.0, .NET 2003, 2005 (Professional or Express), or 2008 (Professional or Express)
Refer to the LabVIEW Real-Time documentation and The MathWorks, Inc Simulink® application software documentation for your installed version for more detailed information about Microsoft Visual C++ support. You also can refer to the KnowledgeBase on ni.com for more information about NI VeriStand version compatibility.
To develop a model and convert it into a compiled model using other modeling environments, contact your model vendor for requirements.
Real-Time Targets
To run a simulation on a real-time (RT) target, the target must have NI VeriStand installed. You can install software on the target using Measurement & Automation Explorer (MAX). The RT target must meet the following minimum system requirements:
LabVIEW
To create custom devices, menu items, workspace controls and indicators, or timing and sync devices, you must have LabVIEW 2011 or 2011 SP1 installed.
Note The LabVIEW functionality in NI VeriStand always requires like-numbered versions.
.NET
The NI VeriStand .NET APIs require the following Microsoft software:
Microsoft .NET Framework 3.5 SP1, which uses Microsoft .NET Common Language Runtime (CLR) 2.0
A .NET environment capable of interacting with .NET Framework 3.5 based assemblies, such as Microsoft Visual Studio 2008 SP1 or LabVIEW 2011
Installation Instructions
Complete the following steps to install NI VeriStand.
Note If you purchased this product with an NI Software Suite or NI Product Bundle, use the installation media that shipped with your purchase to install this product.
Log on as an administrator or as a user with administrator privileges.
Some virus detection programs interfere with the installer. Disable any automatic virus detection programs before you install. After installation, check your computer for viruses and enable any virus detection programs you disabled.
(Optional) To use LabVIEW with NI VeriStand, install the like-numbered version of LabVIEW on the host computer.
Insert the NI VeriStand installation media and follow the instructions that appear on the screen.
Install the NI-DAQmx driver software from the NI Device Drivers DVD or any NI DAQmx driver DVD.
Note The NI-DAQmx driver software is required to deploy a system definition to any platform, including the localhost running Windows.
(Optional) If using NI-XNET, insert the NI-XNET installation media and follow the instructions that appear on the screen.
(Optional) Activate NI VeriStand when prompted by the installer, or activate at a later time using the NI License Manager.
Updates and Notifications
National Instruments releases critical software updates after product release using the NI Update Service. Visit ni.com/info and enter updates to view a list of all currently available updates.
National Instruments provides notification of certain critical issues at install time. Visit ni.com/info and enter notifications to view a list of current product notifications.
Accessing the Help
NI VeriStand includes the following documentation resources:
| Resource | Contents | Access Instructions |
| NI Veristand Help | Conceptual, how-to, and reference information for using NI VeriStand. | In software: Help»Search the NI VeriStand Help
OR
Windows Start menu: All Programs»National Instruments»NI VeriStand»VeriStand Help |
| NI VeriStand .NET API Help | Reference information for the .NET APIs included with NI VeriStand. You can access these assemblies from any .NET-compatible programming language or environment, including NI LabVIEW™ and NI TestStand™. | Windows Start menu: All Programs»National Instruments»NI VeriStand»VeriStand .NET API Help. |
| Using the NI VeriStand Model Framework | Information about how to use the NI VeriStand Model Framework to compile your existing C and C++ model code so you can load your models in NI VeriStand. You can access this guide from the . | xxxModelInterfacecustom directory, where xxx is the directory you specified when you installed the NI VeriStand Model Framework.
Note You must explicitly select NI VeriStand Model Framework when you run the NI VeriStand installer. It does not install by default. |
Note If you install NI VeriStand with the compatible version of LabVIEW, you also can access a subset of the NI VeriStand Help, including information about the NI VeriStand VIs and extending NI VeriStand functionality with LabVIEW, from the LabVIEW Help. From the pull-down menu in LabVIEW, select Help»LabVIEW Help.
Finding Examples
NI VeriStand includes several types of examples:
NI VeriStand Project—An example NI VeriStand project, including related items such as a system definition, a Workspace screen file, compiled models, and NI-XNET files, are located in the <;Public Documents>National InstrumentsNI VeriStandProjectsExample directory.
Stimulus Profile Editor—NI VeriStand Stimulus Profile Editor examples are located in the <;Public Documents>National InstrumentsNI VeriStandExamples directory.
Tip On Windows 7/Vista, the default location of the <;Public Documents> directory is C:UsersPublicPublic Documents.
LabVIEW API—LabVIEW examples that use the NI VeriStand API are located in the <;Program Files>National InstrumentsLabVIEW 2011examplesNI Veristand directory.
Known Issues
You can access the software and documentation known issues list online. Refer to the National Instruments Web site for an up-to-date list of known issues in NI VeriStand 2011 and 2011 SP1.
Bug Fixes
The following items are the IDs and titles of a subset of issues fixed in NI VeriStand 2011 SP1. This is not an exhaustive list of issues fixed in the current version of NI VeriStand. If you have a CAR ID, you can search this list to validate the issue has been fixed.
| ID | Fixed Issue |
| 297664 | Memory leak when opening and closing the Workspace window repeatedly |
| 314089 | A profile is editable by drag/drop while it is running |
| 315109 | System Explorer gives Error 1430 when you try to close it from the Parameters or Signals configuration page |
| 316701 | Alarm Command procedure on the second target only allows selecting alarm from first target |
| 317821 | The Fault function in a real-time sequence does not completely fault the channel |
| 319336 | Converting a VI to a .lvmodel file fails if the VI was last saved in a version of LabVIEW older than 2011 |
| 320477 | Selecting File»Save As from an existing stimulus profile produces exception |
| 320604 | Cannot programmatically set model inport and outport default values |
| 321434 | Imported model information and rate are not correct in NI VeriStand 2011 |
| 322684 | Real-time sequence expressions do not allow constant values of 10^10 and greater |
| 323469 | Incorporate definitions for Stimulus Profile Editor and Real-Time Sequences in the NI VeriStand Help |
| 325080 | Cyclic CAN Frames are sent with 1 ms rate regardless of what is dictated in the XNET database |
| 327030 | Disable variable does not disable frames in legacy NI-CAN devices |
| 328143 | File path dialog error in the Stimulus Profile Editor when trying to create a new log file |
| 328974 | Raw frame logging does not log LIN and FlexRay frames |
| 328975 | Bus monitor does not show LIN frames |
| 329328 | Maximum convert clock setting is not applied when selected |
| 329713 | Triggered XNET frame is sent the very first time without respecting the default value of the signal |
| 331647 | TDMS logs have non-standard and inconsistent unit definitions |
| 335859 | Inports and outports do not get imported if their paths are too long |
| 338386 | Sequence with undeclared variables do not show errors in the Stimulus Profile Editor but fails to compile |
| 341766 | NI VeriStand crashes during undeploy with CloseOperation.cpp error |
You also can refer to the National Instruments Web site to view a list of issues fixed in the previous release of NI VeriStand.
Automating the Installation of NI Products
You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes. However, starting with the August 2012 releases (products using NI Installers version 3.1 or later), you may need to perform additional steps before or during a silent installation of NI software.
If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software.
For more information, refer to the following KnowledgeBase articles:
For more information on silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.
For more information on silent installations of suited NI products, such as NI Developer Suite, refer to KB 4GGGDQH0, Automating the Installation of a Suited Installer.
To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My National Instruments Installer?.
Copyright
© 2009-2012 National Instruments. All rights reserved.
Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
End-User License Agreements and Third-Party Legal Notices
You can find end-user license agreements (EULAs) and third-party legal notices in the following locations:
Notices are located in the <National Instruments>_Legal Information and <National Instruments> directories.
EULAs are located in the <National Instruments>SharedMDFEULAs directory.
Review <National Instruments>_Legal Information.txt for information on including legal information in installers built with NI products.
Trademarks
LabVIEW, National Instruments, NI, ni.com, the National Instruments corporate logo, and the Eagle logo are trademarks of National Instruments Corporation. Refer to the Trademark Information at ni.com/trademarks for other National Instruments trademarks.
MATLAB®, Real-Time Workshop®, and Simulink® are registered trademarks of The MathWorks, Inc.
Other product and company names mentioned herein are trademarks or trade names of their respective companies.
Patents
For patents covering the National Instruments products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.
