下载中心

LabVIEW 2010 Control Design and Simulation Module Win32Eng LabVIEW控制设计和仿真模块CDSIM2010

文章来源:石鑫华视觉网时间:2022-04-25 17:32:31 点击:294

Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活，以下链接可下载：
NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本
http://pcmv.cn/thread-490-1-1.html

视觉论坛的各种资源，除了视觉相关的模块有使用外，大部分的都不会使用，所以仅提供资源不能提供技术支持。资源的下载地址一般会同时提供NI官方地址和百度网盘的下载地址。某些工具包NI的地址失效或没有NI的下载地址，那视觉论坛也没有办法，只能尝试使用百度网盘地址下载；如果百度网盘的下载地址失效过期，可联系论坛客服更新。现在NI的下载服务器对我国IP地址不是很友好，有些时候速度很慢或大的资源下载很容易出错，这样会造成安装过程各种类型报错而无法安装。建议在下载完成后，对下载资源做校验和验证（NI一般会提供MD5或SHA256等），与官方或视觉论坛提供的校验和对比，一致就可以安装，如果不一致，则需要重新下载。视觉论坛早期下载的资源，那时候NI没有这么多限制，基本上都是正常下载的资源；后期下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘，所以百度网盘的资源基本上是正确的。校验和工具下载地址：
文件Hash计算器FHash,文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算
http://pcmv.cn/thread-26524-1-1.html

LabVIEW 2010 Control Design and Simulation Module Win32Eng LabVIEW控制设计和仿真模块CDSIM2010

LabVIEW控制设计与仿真模块可用于仿真动态系统、设计控制器，并将控制系统部署至实时硬件。
LabVIEW控制设计与仿真模块是一款与LabVIEW平台相集成的附加软件，提供了内置并行机制、多核和多速率技术等编程能力以及用来部署至实时硬件的工具。您可将测量功能集成到用于系统识别、模型校准或模型验证的设计中。然后将算法部署至NI实时嵌入式硬件，实现快速控制原型和硬件在环(HIL)应用。

百度网盘下载地址（限速，请开会员或使用破解限速工具）：
链接: 请注册视觉论坛用户，登陆后购买附件下载查看，充值请联系在线客服提取码: 请注册登陆视觉论坛会员，购买附件查看

NI官方下载地址（可能无效或无法下载完成）：
请注册登陆视觉论坛会员，购买附件查看

http://pcmv.cn/thread-24352-1-1.html?fromuid=9

(出处: 视觉论坛VISIONBBS|视觉之家VISIONHOME)

LabVIEW 2010 Control Design and Simulation Module Readme

Version 10.0.0

June 2010

The LabVIEW 2010 Control Design and Simulation Module provides tools with which you can analyze open-loop model behavior, design closed-loop controllers, simulate online and offline systems, and conduct physical implementations. This file contains the following information about the Control Design and Simulation Module.

System Requirements
Supported Operating Systems
Limitations on Mac OS X and Linux
Version 2010 Features and Changes
Installation/Upgrading Instructions
Windows
Mac OS X
Linux
Accessing the Help
Finding Examples
Known Issues
Bug Fixes

System Requirements

The Control Design and Simulation Module has the following requirements:

LabVIEW 2010 Full or Professional Development System
At least 350 MB additional disk space for Control Design and Simulation Module support
(Optional) LabVIEW MathScript RT Module. In LabVIEW 2009, LabVIEW MathScript became the LabVIEW MathScript RT Module. You cannot run VIs from previous versions of LabVIEW that contain MathScript Nodes until you install and activate the MathScript RT Module or remove the MathScript Nodes from the VIs. If you have already purchased the MathScript RT Module, select Help»Activate LabVIEW Components to activate the product.
(Optional) LabVIEW SignalExpress. If you plan to install the LabVIEW Control Design Assistant, you first must install LabVIEW SignalExpress.

Supported Operating Systems

You can run the LabVIEW Control Design and Simulation Module installer on the following operating systems:

Windows 7 (32-bit and 64-bit)
Windows Vista (32-bit and 64-bit)
Windows XP (32-bit)
Windows Server 2003 R2 (32-bit)
Windows Server 2008 R2 (64-bit)
Mac OS X 10.5.0 or later
Red Hat Enterprise Linux WS 4 or later
openSUSE 11.0 or later

The LabVIEW Control Design and Simulation Module installer does not support Windows 2000/NT/Me/98/95 or the Windows Server non-R2 editions.

Limitations on Mac OS X and Linux

The LabVIEW Control Design and Simulation Module on Mac OS X and Linux does not support the following features:

LabVIEW Control Design Assistant
Real-Time support

Version 2010 Features and Changes

The LabVIEW 2010 Control Design and Simulation Module incorporates the following new features and changes.

Enabled and Triggered Subsystems

When you use subsystems on a simulation or block diagram, you can configure those subsystems to execute only when enabled or triggered. An enabled subsystem is one that executes when a Boolean input to the subsystem receives a TRUE value. A triggered subsystem is one that executes when an input signal to the subsystem crosses 0 or an offset from 0 that you specify. The same subsystem can be both enabled and triggered, and you can specify the behavior of individual outputs of the subsystem when that subsystem does not execute.

To configure enabling or triggering for a subsystem, double-click the subsystem to display the Subsystem Configuration dialog box. Select Execution Control from the Parameters list and use the options under Parameter Information to configure the basic execution behavior of the subsystem. Select individual outputs from the Parameters list to configure the behavior of those outputs when the subsystem does not execute.

Note: The Simulation Model Converter also supports the conversion of your .mdl files that contain enabled and triggered subsystems.

Performance Enhancements

In previous versions of the LabVIEW Control Design and Simulation Module, some users experienced slow load times for simulation diagrams. The LabVIEW 2010 Control Design and Simulation Module improve load times for simulation diagrams.

Keyboard Shortcuts for Subsystems

The following table lists new keyboard shortcuts you can use to display the front panel and block diagram of a simulation subsystem.

Note: The <Ctrl> key in these shortcuts corresponds to the (Mac OS X) <Command> key.

Keyboard Shortcut	Description
Ctrl-double-click	Displays the block diagram of the subsystem.
Shift-double-click	Displays the front panel of the subsystem.

DAE Solvers

You can use the Implicit Systems functions to solve differential algebraic equations (DAEs) on a simulation diagram or within a Control & Simulation Loop. These functions enable you to use DAEs in building a simulation. Previous versions of the Control Design and Simulation module supported only ordinary differential equation (ODE) solvers. Navigate to Control Design & Simulation»Simulation»Implicit Systems on the Functions palette to access the following new functions:

Algebraic Variable
Implicit State
Implicit Variable

Note: You must select the BDF solver in the Configure Simulation Parameters dialog box to use these functions.

Save for Previous

In previous versions of the LabVIEW Control Design and Simulation Module, you could not save a VI that contained a Control & Simulation Loop for a previous version of LabVIEW. In the LabVIEW 2010 Control Design and Simulation Module, you can save VIs that contain a Control & Simulation Loop for LabVIEW 2009. You cannot save these VIs for LabVIEW versions prior to 2009.

Simulation Model Converter Enhancements

The Simulation Model Converter converts your .mdl files that contain enabled and triggered subsystems and configures the resulting subsystems in LabVIEW. Select Tools»Control Design and Simulation»Simulation Model Converter to launch the Simulation Model Converter dialog box and convert your .mdl files.

Support for Stateflow® Conversion with the Simulation Model Converter

In previous versions of the LabVIEW Control Design and Simulation Module, the Simulation Model Converter did not support the conversion of statecharts developed with The MathWorks, Inc. Stateflow® application software. In the LabVIEW 2010 Control Design and Simulation Module, the Simulation Model Converter converts statecharts developed with The MathWorks, Inc. Stateflow® application software into statecharts usable within the LabVIEW Statechart Module.

Note: To convert statecharts developed with The MathWorks, Inc. Stateflow® application software to statecharts usable within the LabVIEW Statechart Module, you must install the LabVIEW Statechart Module. Visit the National Instruments Web site for more information about the LabVIEW Statechart Module.

Installation/Upgrading Instructions

(Windows) You can install all of your LabVIEW products—including the Control Design and Simulation Module—using the LabVIEW 2010 Platform DVDs. You can find installation instructions for the Control Design and Simulation Module along with activation instructions in the following locations:

LabVIEW Release Notes, which are available in your LabVIEW software kit.
LabVIEW 2010 Platform DVDs Readme, which is available on the top-level of LabVIEW Platform DVD 1.

To request additional LabVIEW 2010 Platform DVDs, refer to the National Instruments Web site.

Note: If you purchased this product with an NI Software Suite or NI Product Bundle, use the installation media that shipped with your purchase to install this product.

(Mac OS X) Complete the following steps to install the LabVIEW 2010 Control Design and Simulation Module for Mac OS X from the LabVIEW Control Design and Simulation Module installation CD.

Insert the LabVIEW 2010 Control Design and Simulation Module installation CD and open LabVIEW2010CDSim.mpkg located under the LabVIEW_2010Mac OS X directory.
Select Continue to run a program to determine if the Control Design and Simulation Module can be installed on your system.
Follow the instructions that appear on the screen and continue to the Select Destination dialog box.
In the Select Destination dialog box, click the Choose button and select the version of LabVIEW to which you want to install the Control Design and Simulation Module.

Note: You must click the Choose button for a proper installation. If you do not select a location where LabVIEW is installed or you select a non-compatible version of LabVIEW, the installation will not complete.

After you select the destination directory, click the Continue button to complete the installation.

(Linux) Complete the following steps to install the LabVIEW 2010 Control Design and Simulation Module for Linux from the LabVIEW Control Design and Simulation Module installation CD.

Log into the system as root.
Insert the LabVIEW 2010 Control Design and Simulation Module installation CD. Use mount /mnt/cdrom to mount the CD. On some systems, the CD mounts automatically.
To change the current directory to the mounted CD, enter the following command:

cd /mnt/cdrom
To run the installation script, enter the following command:

sh ./INSTALL

If you encounter the following message: "bad interpreter: Permission denied", the CD may not have mounted with executable permissions. To work around this, enter the following command:

/bin/sh ./INSTALL

Accessing the Help

The LabVIEW Control Design User Manual contains conceptual information about using the control design functionality of the Control Design and Simulation Module. Open this manual by selecting Start»All Programs»National Instruments»LabVIEW 2010»LabVIEW Manuals and opening CD_User_Manual.pdf or by navigating to the labviewmanuals directory and opening CD_User_Manual.pdf.

The LabVIEW Control Design and Simulation Module Help contains conceptual, how-to, and reference information about the Control Design and Simulation Module.

(Windows) Complete the following steps to access this help file.

Launch LabVIEW.
Select Help»LabVIEW Help to launch the LabVIEW Help.
Click the Contents tab.
On the Contents tab, navigate to the Control Design and Simulation Module book.

(Mac OS X, Linux) Complete the following steps to access this help file.

Launch LabVIEW.
Select Help»Control Design and Simulation Module to launch the Control Design and Simulation Module Help.

Refer to the LabVIEW Control Design Toolkit Algorithm References for information about algorithms implemented in the LabVIEW Control Design and Simulation Module and their corresponding references. Access the LabVIEW Control Design Toolkit Algorithm References by navigating to the labviewmanuals directory and opening CDreference.pdf.

Finding Examples

Refer to the labviewexamplesControl and Simulation directory for example VIs that demonstrate common tasks using the Control Design and Simulation Module. You also can access these VIs by selecting Help»Find Examples from the pull-down menu and selecting Toolkits and Modules»Control Design and Simulation in the NI Example Finder window. You can modify an example VI to fit an application, or you can copy and paste from one or more examples into a VI that you create.

Known Issues with Version 2010

You can access the software and documentation known issues list online. Refer to the National Instruments Web site for an up-to-date list of known issues in the LabVIEW 2010 Control Design and Simulation Module.

Bug Fixes

The following items are the IDs and titles of a subset of issues fixed between the LabVIEW 2009 Control Design and Simulation Module and the LabVIEW 2010 Control Design and Simulation Module. This is not an exhaustive list of issues fixed in the current version of the Control Design and Simulation Module. If you have a CAR ID, you can search this list to validate the issue has been fixed.

ID	Fixed Issue
36748	Simulation Model Converter: Incorrect implementation of Selector block (Legacy ID: 3Z5925DL)
48302	Broken Save and Load buttons in configuration dialog boxes (Legacy ID: 3QPBCTDL)
123506	Cannot linearize subsystem with empty array default values
131426	Upgrading a Simulation VI may result in a broken VI
133330	Seed terminal not available for Correlated Random Gaussian Noise VI
143597	Simulation Model Converter: Converter produces no VI and gives internal errors if an initialization script has errors
151578	BDF solver gets wrong answer when integrating the derivative of a step function
163739	Documentation: Control Design MathScript functions not listed by "help classes"
167978	MathScript: eig function does not support Control Design data-types
168606	Documentation: Help for CD Continuous Kalman Filter has wrong equations
171665	Documentation: Context help missing for Estimation Function controls
172353	State-space to transfer function conversion loses zeros
172859	Simulation Model Converter crashes when converting models with a The MathWorks, Inc. MATLAB Fcn block on Mac OS X or Linux
173772	Single-stepping subsystems do not execute in LabVIEW built applications.
174446	Changing connector pane for subsystem may cause subsystem to fail to compile
174532	Documentation: CD Continuous Algebraic Riccati Equations VI help is incorrect
174799	Documentation: Control Design Assistant examples do not have links to help
175551	Subsystems fail to autosave correctly
175715	Vector Transport Delay causes runtime error on ARM
175716	Generated C code for Control & Simulation loop fails to compile if "Generate Debug Info" is TRUE
175721	Vector Discrete Unit Delay causes runtime error on ARM
175932	Control Design Assistant appears twice in Activation Wizard
175933	Documentation: Error in the online help of the CD Continuous Lyapunov Equation VI (Legacy ID: 4ACCJK7G)
176322	Estimation examples do not run on Mac or Linux without changes
177810	Simulation diagram remains broken after a feedback cycle is undone
177828	Error on Simulation diagram with calculation cycles, even if memory functions are used
178167	Simulation Model Converter: Cannot convert Sine and Cosine for older models
178362	Right-clicking a subsystem triggers an unnecessary recompile
180442	Nested Case Structures in simulations with local and global variables might fail to compile
180486	SimDiagSupport.cpp crash when placing Diagram Disable structure around indicators in subsystem
182237	Documentation: Simulation Model Converter dialog box missing documentation for some items
182510	In some cases, VI does not break wire on simulation diagram
184542	Documentation: EMI_GetCurrentVersion function not documented
188235	Documentation: Documentation does not match the input of CD Draw Model Equation VI
191403	Vector instances of Buffer XY Graphs have problems with long histories
191430	Error 1357 when running Simulation Model Converter twice without closing
192535	Choosing "Config page only" for EMI Parameters still allows parameters to come from terminals
193893	Documentation: Finalization step for SubVI node setup is treated as a minor step
195465	Cannot synchronize Control & Simulation Loop to timing source on ARM
198784	Control & Simulation Loop priority cannot be 0
198882	Converter: Control & Simulation Loop created from Simulation Model Converter returns error -820 when used with hardware timing
205013	Transfer Function returns error -2381 for Model Numerator = [0] and Denominator = [1]
214160	Right-clicking the Input Node of a Control & Simulation Loop and selecting "Remove Input" causes error
214904	Documentation: MathScript: Help for Control Design classes not available
216739	Subsystem does not appear broken when opened with a missing a subVI
219640	MathScript: Bode (num, den) does not work
221138	MIMO State-Space Function does not Recover from NaN input even after reinitializing execution
224821	Documentation: Document limit on Control & Simulation Loop "Priority Range" (1 to 65535)
232863	Example of iopzgraph does not generate plot correctly

Important Information

Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.

National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.

Trademarks

LabVIEW, National Instruments, NI, ni.com, the National Instruments corporate logo, and the Eagle logo are trademarks of National Instruments Corporation. Refer to the Trademark Information at ni.com/trademarks for other National Instruments trademarks.

Simulink® is the registered trademark of The MathWorks, Inc.

Other product and company names mentioned herein are trademarks or trade names of their respective companies.

Patents

For patents covering the National Instruments products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.

下载中心

LabVIEW 2010 Control Design and Simulation Module Win32Eng LabVIEW控制设计和仿真模块CDSIM2010