Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活，以下链接可下载：
NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本
http://pcmv.cn/thread-490-1-1.html
视觉论坛的各种资源，除了视觉相关的模块有使用外，大部分的都不会使用，所以仅提供资源不能提供技术支持。资源的下载地址一般会同时提供NI官方地址和百度网盘的下载地址。某些工具包NI的地址失效或没有NI的下载地址，那视觉论坛也没有办法，只能尝试使用百度网盘地址下载；如果百度网盘的下载地址失效过期，可联系论坛客服更新。现在NI的下载服务器对我国IP地址不是很友好，有些时候速度很慢或大的资源下载很容易出错，这样会造成安装过程各种类型报错而无法安装。建议在下载完成后，对下载资源做校验和验证（NI一般会提供MD5或SHA256等），与官方或视觉论坛提供的校验和对比，一致就可以安装，如果不一致，则需要重新下载。视觉论坛早期下载的资源，那时候NI没有这么多限制，基本上都是正常下载的资源；后期下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘，所以百度网盘的资源基本上是正确的。校验和工具下载地址：
文件Hash计算器FHash,文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算
http://pcmv.cn/thread-26524-1-1.html
LabVIEW 2011 Real-Time Module LV2011实时模块RealTime2011-Eng 32位Windows英文版下载
自2011版实时模块起，NI提供了中文、日文、英语等三个语言版。本视觉论坛仅提供中文和英文版，日文版本本论坛不提供下载。
LabVIEW Real-Time模块可帮助您创建在嵌入式硬件设备上执行的可靠、独立的应用程序。
LabVIEW Real-Time模块是LabVIEW编程环境的一个附加软件，可用于创建和部署用于测试、监测和控制的实时分布式系统应用程序。您可以利用实时操作系统来确保独立系统的可靠性和精确定时。数百个事先编写好的LabVIEW库和硬件API还可以帮助您节省宝贵的开发时间以及实现确定性数据采集。
LabVIEW Real-Time模块为创建可靠独立的嵌入式系统提供了基于图形化编程方法的完整解决方案。 作为LabVIEW开发平台的附加模块，LabVIEW Real-Time模块有助开发和调试图形化应用程序，并将这些程序下载到嵌入式硬件设备（如：CompactRIO、Single-Board RIO、PXI、视觉系统，乃至第三方PC）上执行。
使用LabVIEW Real-Time模块的三大理由:
1. 将LabVIEW图形化编程扩展至独立的嵌入式系统
LabVIEW Real-Time包含了用于多线程和实时线程调度的内置结构，以帮助您高效地编写稳定、确定的代码。 您可对独立式系统进行图形化编程，使其更长时间地可靠运行。
2. 利用实时操作系统实现精确的定时和高可靠性
通用操作系统并不适用于需要严格定时的重要应用。 LabVIEW Real-Time可支持运行NI Linux Real-Time、VxWorks或Phar Lap ETS实时操作系统(RTOS)的NI嵌入式硬件。
3. 利用各类IP和实时硬件驱动
您可使用数百个预编写的LabVIEW函数库，比如PID控制和FFT，并用于独立式系统。 NI还提供了大量实时硬件驱动程序和LabVIEW API，适用于大多数NI I/O模块，以实现确定的数据采集。
百度云盘下载地址（限速，请开会员或使用破解限速工具）：
链接: 请注册视觉论坛用户，登陆后购买附件下载查看，充值请联系在线客服 提取码: 请注册登陆视觉论坛会员，购买附件查看
NI官方下载地址（可能无效或无法下载完成）：
请注册登陆视觉论坛会员，购买附件查看
LabVIEW 2011 Real-Time Module LV2011实时模块RealTime2011-Eng 32位Windows英文版下载
http://pcmv.cn/thread-24192-1-1.html?fromuid=9
(出处: 视觉论坛VISIONBBS|视觉之家VISIONHOME)
LabVIEW 2011 Real-Time Module Readme
Version 11.0.0
June 2011
This file contains important information about the LabVIEW 2011 Real-Time Module.
Supported Platforms
Installation
Known Issues
Bug Fixes
Notice Regarding Microsoft Silverlight Installation and Redistribution
Supported Platforms
The Real-Time Module supports the following operating systems for application development:
Windows 7
Windows Vista
Windows XP Pro (Service Pack 2 or 3)
Windows Server 2003 R2 (32-bit)
Windows Server 2008 R2 (64-bit)
Note:
The Real-Time Module is compatible with 32-bit LabVIEW only. Therefore, you must have 32-bit LabVIEW installed even if you use a 64-bit OS.
Support for Windows Server 2003 R2 may require disabling physical address extensions (PAE). Refer to the National Instruments Web site for information about how this might affect your use of Windows Server 2003 R2 and what actions you might have to take.
The Real-Time Module does not support the Windows Server non-R2 editions.
The Real-Time Module installs the following real-time operating systems (RTOSes). Refer to the specific RT target hardware documentation for information about which RTOS your target uses.
Note: Each RTOS supports only a subset of LabVIEW features. Refer to the Real-Time Module»Unsupported LabVIEW Features book on the Contents tab of the LabVIEW Help for a list of unsupported LabVIEW features for each RTOS.
Installation
You can install all of your LabVIEW products, including the LabVIEW Real-Time Module, using the LabVIEW 2011 Platform DVDs. You can find installation and activation instructions for the Real-Time Module in the following locations:
LabVIEW Real-Time Module Release and Upgrade Notes, which are available in your LabVIEW Real-Time Module software kit or online at ni.com/manuals.
LabVIEW Release Notes, which are available in your LabVIEW software kit.
LabVIEW 2011 Platform DVDs Readme, which is available on the top-level of LabVIEW Platform DVD 1.
To request additional LabVIEW 2011 Platform DVDs, refer to the National Instruments Web site.
Note: If you purchased this product with an NI Software Suite or NI Product Bundle, use the installation media that shipped with your purchase to install this product.
Installing and Using Japanese and Simplified Chinese Languages on an RT Target
After you install the Real-Time Module on your development computer, you can complete the following steps to install and use Japanese and Simplified Chinese languages on an RT target.
Use the LabVIEW Real-Time Software Wizard in NI Measurement & Automation Explorer to install the Language Support for Japanese or Language Support for Simplified Chinese software component on the RT target. Refer to the NI Measurement & Automation Explorer Help for information about the LabVIEW Real-Time Software Wizard.
Open the System Settings tab and select Japanese or Simplified Chinese as the Locale.
Note: You cannot use Japanese or Simplified Chinese characters in directory names or file names on the RT target.
Known Issues
Refer to the National Instruments Web site for an up-to-date list of known issues in the LabVIEW 2011 Real-Time Module.
Bug Fixes
The following items are the IDs and titles of a subset of issues fixed in the LabVIEW 2011 Real-Time Module.
| ID | Fixed Issue |
| 293334 | ETS PCI Config space functions may not properly deal with indices not divisible by 4. |
| 292386 | Domain Name option in DHCP/BOOTP Need to be parsed correctly |
| 292009 | Scan Engine built application with a timed loop doesn't exit on close |
| 291729 | RT Apply Network Settings (Static) doesn't handle empty string inputs correctly |
| 284950 | Deployment of built source distribution to RT target in LV 2010 causes error/crash |
| 280489 | "Delay of communication, slow down of code on cRIO when project disconnected." |
| 258696 | Deployment failure due to network protocol issues on cFP-2120 with large statechart |
| 255732 | Remote debugging RT Application for Timing source heirarchy broken on VxWorks |
| 255014 | "Probes are listed as ""Not Executed"" intermittently on real time target" |
| 252965 | [TDMS] TDMS write hangs on cRIO if three DMAs are used in parallel |
| 250741 | Cannot FTP into a cRIO in Safe Mode if it has been Locked |
| 250468 | Disconnecting from an RT Target Leaks Massive Amounts of Memory and May Crash RT upon Reconnecting |
| 248828 | Scan thread switching among cores causes timed loop to finish late. |
| 246770 | Cannot listen on same TCP port on two different NICs |
| 246281 | Leak opening and closing LV projects with RT Desktop targets in them -- one nimxsoffline.exe leaked per RT Desktop target |
| 240199 | Reconnecting network to a PharLap RT 2009 system while opening a DataSocket connection causes persistant error 56 |
| 237822 | "LV2010 RT Format in Safe Mode causes ""Blue Screen Scheduler Assertion"" when no valid RT partitions are found on drive" |
| 235520 | Run Continously button glyph is not updated after disconnecting and reconnecting |
| 230877 | RTC plug-in cannot be loaded if NI RT Extensions for SMP (MultiCore Support) 9.0 is installed |
| 230504 | RTC plug-in causes the current system time to fly 3 times faster than the normal clock. |
| 209197 | "Deploying LVOOP VIs to an RT target (cRIO 9074) results in ""Waiting for Real-Time Target (M1P) to respond"" messages" |
| 204879 | Timed Structure waits for Timeout at the end of loop execution |
| 203211 | Deployment Error Due to Failed Loading of lvanlys.* |
| 193159 | LV project deploys configuration whenever Local Windows Host VI runs as soon as you add a module to your cRIO or ECAT chassis |
| 155193 | "Visa Error, CRIO error under MAX incorrect time" |
| 113266 | Cannot delete RTEXE on PharLap after application stops executing and VIs are unloaded - Makes field updates harder |
| 297476 | Ethernet Drivers may fill up customer hard drives if Multicast packets are received |
| 246179 | TCP Listen does not play nicely when using dynamic port assignment |
Notice Regarding Microsoft Silverlight Installation and RedistributionInstalling Microsoft Silverlight
Some NI components require Microsoft Silverlight. If you do not have Silverlight installed on your computer, but you do have Internet access, you can download the installer from Microsoft at http://www.microsoft.com/silverlight/. If you do not have Internet access, you can install Silverlight from this NI distribution media. Using Microsoft Silverlight
You may not use any H.264/MPEG-4 AVC and/or VC-1 technology or codecs included in or with Microsoft Silverlight software which may be provided by NI as Third Party Software, including for the purpose of encoding or decoding video in compliance with, or making use of, the H.264/AVC visual standard or the VC-1 video standard.
Redistribution of Microsoft Silverlight
If you create and distribute software applications that contain NI components that also use Microsoft Silverlight, you may be authorized to include Silverlight in installers or on physical media as long as you comply with certain requirements. Refer to the notice.txt file in the <National Instruments>_Legal InformationMicrosoft Silverlight 4.0 directory or the NI standard End User License Agreement (EULA) located in the <National Instruments>CommonMDFEULADepotNIReleased directory for more information.
Important Information
Copyright
© 2011 National Instruments Corporation. All rights reserved.
Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
Trademarks
LabVIEW, National Instruments, NI, ni.com, the National Instruments corporate logo, and the Eagle logo are trademarks of National Instruments Corporation. Refer to the Trademark Information at ni.com/trademarks for other National Instruments trademarks.
Other product and company names mentioned herein are trademarks or trade names of their respective companies.
Patents
For patents covering the National Instruments products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.
