Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活，以下链接可下载：
NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本
http://pcmv.cn/thread-490-1-1.html
视觉论坛的各种资源，除了视觉相关的模块有使用外，大部分的都不会使用，所以仅提供资源不能提供技术支持。资源的下载地址一般会同时提供NI官方地址和百度网盘的下载地址。某些工具包NI的地址失效或没有NI的下载地址，那视觉论坛也没有办法，只能尝试使用百度网盘地址下载；如果百度网盘的下载地址失效过期，可联系论坛客服更新。现在NI的下载服务器对我国IP地址不是很友好，有些时候速度很慢或大的资源下载很容易出错，这样会造成安装过程各种类型报错而无法安装。建议在下载完成后，对下载资源做校验和验证（NI一般会提供MD5或SHA256等），与官方或视觉论坛提供的校验和对比，一致就可以安装，如果不一致，则需要重新下载。视觉论坛早期下载的资源，那时候NI没有这么多限制，基本上都是正常下载的资源；后期下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘，所以百度网盘的资源基本上是正确的。校验和工具下载地址：
文件Hash计算器FHash,文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算
http://pcmv.cn/thread-26524-1-1.html
LabVIEW 2015SP1 NI SoftMotion Module Win32 NI运动控制模块2015SP1 适用LV2015SP1
LabVIEW 2015SP1 SoftMotion模块
LabVIEW SoftMotion模块可帮助您将运动控制与I/O和视觉应用程序进行集成。
LabVIEW SoftMotion模块是LabVIEW编程环境的一个附加软件。您可在LabVIEW项目中配置、测试和调整LabVIEW SoftMotion轴。您可以将这些轴绑定到各种NI和第三方硬件配置。该模块具有用于自定义运动应用设计的高级功能，包括轨迹生成和多轴功能，如齿轮和坐标空间。
百度网盘下载地址（百度限速，请耐心等待。或使用破解工具或开超级会员提速）：
链接: 请注册视觉论坛用户，登陆后购买附件下载查看 提取码: 请注册登陆视觉论坛会员，购买附件查看
NI官方下载地址（可能失效或无法下载完成）：
请注册登陆视觉论坛会员，购买附件查看
LabVIEW 2015SP1 NI SoftMotion Module Win32 NI运动控制模块2015SP1 适用LV2015SP1
http://pcmv.cn/thread-24120-1-1.html?fromuid=9
(出处: 视觉论坛VISIONBBS|视觉之家VISIONHOME)
LabVIEW 2015 SP1 SoftMotion™ Module Readme
February 2016
This document contains information to introduce you to the LabVIEW 2015 SP1 SoftMotion Module including installation information, a list of changes in this version of SoftMotion, and information about known issues for this version of SoftMotion.
Contents
Overview
System Requirements
Installation Instructions
Licensing
New Features and Changes
Bug Fix List
General Information
Accessing the Help
Finding Examples
Known Issues
Automating the Installation of NI Products
Overview
The LabVIEW 2015 SP1 SoftMotion Module allows you to use the LabVIEW project to configure and test your motion axis settings, tune your servo motors, program deterministic motion profiles, create custom motion applications, and simulate your designs created in SOLIDWORKS.
Note: Refer to the SoftMotion Selection Guide at zone.ni.com for a description of the different SoftMotion Module packages available.
System Requirements
You can run the LabVIEW 2015 SP1 SoftMotion Module installer on the following operating systems:
Windows 10/8.1/8.0/7/Vista
Windows XP Service Pack 3 (32-bit)
Windows Server 2003 R2 (32-bit)
Windows Server 2008 R2 (64-bit)
Windows Server 2012 R2 (64-bit)
The LabVIEW 2015 SP1 SoftMotion Module runs as a 32-bit application on all operating systems.
Note: Support for Windows Server 2003 R2 may require disabling physical address extensions (PAE). To learn how this might affect your use of Windows Server 2003 and what actions you might have to take, visit ni.com/info and enter the info code PAESupport.
The LabVIEW 2015 SP1 SoftMotion Module does not support Windows 2000/NT/Me/98/95, Windows XP x64, or the Windows Server non-R2 editions.
To run the LabVIEW 2015 SP1 SoftMotion Module, National Instruments recommends that your system meet the following requirements in addition to the minimum requirements for the LabVIEW Development System for Windows:
The LabVIEW 2015 SP1 SoftMotion Module is compatible with the following National Instruments software.
LabVIEW 2015 SP1 Base, Full, or Professional Development System (32-bit)
LabVIEW 2015 SP1 Real-Time Module
LabVIEW 2015 SP1 FPGA Module
NI-RIO Device Drivers February 2016
NI-Industrial Communications for EtherCAT® 15.0
Note To use SoftMotion for SOLIDWORKS you must have SOLIDWORKS 2009 SP2.1 or later.
Installation InstructionsInstalling from the LabVIEW 2015 SP1 Platform DVDs
You can install all of your LabVIEW products—including the LabVIEW 2015 SP1 SoftMotion Module—using the LabVIEW 2015 SP1 Platform DVDs. Refer to the LabVIEW Installation Guide on the LabVIEW Platform DVD 1 for installation instructions and system requirements.
To request additional LabVIEW 2015 SP1 Platform DVDs, refer to the National Instruments Web site at ni.com.
Note If you purchased this product with an NI Software Suite or NI Product Bundle, use the installation media that shipped with your purchase to install this product.
Downloading the LabVIEW 2015 SP1 SoftMotion Module from the Web
Complete the following steps to download and install the LabVIEW 2015 SP1 SoftMotion Module:
Download the LabVIEWSoftMotionModule2015SP1.exe file from ni.com/updates, and then run it.
Follow the onscreen instructions.
Note (Windows 10/8.1/8.0/7/Vista) Users may see access and security messages during installation. Accept the prompts to complete the installation.
When the installer completes, a dialog box appears that asks if you want to restart, shut down, or restart later. Select Restart.
LabVIEW SoftMotion Module Updates and Notifications
National Instruments releases critical software updates after product release using the NI Update Service. Visit ni.com/info and enter updates to view a list of all currently available updates.
National Instruments provides notification of certain critical issues at install time. Visit ni.com/info and enter notifications to view a list of current product notifications.
Licensing
The LabVIEW SoftMotion Module relies on licensing activation. After the evaluation period for SoftMotion Module expires, you must activate a valid license before you can run the software. To activate the SoftMotion Module, use the serial number you received as part of your installation package.
Refer to the Activation Instructions for National Instruments Software for more information about licensing activation.
LabVIEW 2015 SP1 SoftMotion Module Features and ChangesSupport for SDI Plug-in Configuration File
The SDI plug-in config file is an XML file that provides information to SoftMotion about supported drives and supported scan rates. The config file replaces and extends the functionality of GetBindings.vi.
LabVIEW 2015 SP1 SoftMotion Module Bug Fix List
Refer to the National Instruments Website for an up-to-date list of all bug fixes in this release.
General InformationLabVIEW Real-Time Users
To use the updates and features included in the LabVIEW 2015 SP1 SoftMotion Module, you must install the LabVIEW 2015 SP1 SoftMotion Module software on the LabVIEW Real-Time target system using Measurement & Automation Explorer (MAX).
Accessing the Help
Refer to the LabVIEW Help, accessible by selecting Help»LabVIEW Help from the pull-down menu in LabVIEW, for information about SoftMotion Module concepts, using SoftMotion, step-by-step instructions using the LabVIEW SoftMotion Module, and reference information about SoftMotion VIs and functions.
Finding Examples
LabVIEW examples for the SoftMotion Module are located in the labviewexamplesMotion folder. You can modify an example VI to fit an application, or you can copy and paste from one or more examples into a VI that you create.
LabVIEW 2015 SP1 SoftMotion Module Known Issues
You can access the software and documentation known issues list online. Refer to the National Instruments Web site for an up-to-date list of known issues in this release.
Back to Top
Automating the Installation of NI Products
You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes. However, starting with the August 2012 releases (products using NI Installers version 3.1 or later), you may need to perform additional steps before or during a silent installation of NI software.
If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software.
For more information, refer to the following KnowledgeBase articles:
For more information on silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.
For more information on silent installations of suited NI products, such as NI Developer Suite, refer to KB 4GGGDQH0, Automating the Installation of a Suited Installer.
To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My National Instruments Installer?.
Back to Top
Important Information
Copyright
© 2004–2016 National Instruments. All rights reserved.
Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
End-User License Agreements and Third-Party Legal Notices
You can find end-user license agreements (EULAs) and third-party legal notices in the following locations:
Notices are located in the <National Instruments>_Legal Information and <National Instruments> directories.
EULAs are located in the <National Instruments>SharedMDFLegallicense directory.
Review <National Instruments>_Legal Information.txt for information on including legal information in installers built with NI products.
Trademarks
LabVIEW, National Instruments, NI, ni.com, the National Instruments corporate logo, and the Eagle logo are trademarks of National Instruments Corporation. Refer to the Terms of Use section on ni.com/legal for more information about National Instruments trademarks. EtherCAT® is a registered trademark of Beckhoff Automation GmbH. Other product and company names mentioned herein are trademarks or trade names of their respective companies.
Patents
For patents covering the National Instruments products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patent.
