石鑫华视觉 手机微信QQ:13450001061 / 18038383457

下载中心

LabVIEW Report Generation Toolkit for Microsoft Office 1.0.1 for LabvIEW6报表工具包RGT1.0.1版

文章来源:石鑫华视觉网时间:2022-04-22 16:05:29 点击:203

Windows系统下(Linux和MAC系统下请自行了解清楚)NI的各种软件、模块、工具包、驱动程序,使用NI许可证管理器来激活的,绝大部分的都可以使用NI Lincense Activator来激活,以下链接可下载:
NI序列号Serial Number生成激活工具NI License Activator,LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本
http://pcmv.cn/thread-490-1-1.html

视觉论坛的各种资源,除了视觉相关的模块有使用外,大部分的都不会使用,所以仅提供资源不能提供技术支持。资源的下载地址一般会同时提供NI官方地址和百度网盘的下载地址。某些工具包NI的地址失效或没有NI的下载地址,那视觉论坛也没有办法,只能尝试使用百度网盘地址下载;如果百度网盘的下载地址失效过期,可联系论坛客服更新。现在NI的下载服务器对我国IP地址不是很友好,有些时候速度很慢或大的资源下载很容易出错,这样会造成安装过程各种类型报错而无法安装。建议在下载完成后,对下载资源做校验和验证(NI一般会提供MD5或SHA256等),与官方或视觉论坛提供的校验和对比,一致就可以安装,如果不一致,则需要重新下载。视觉论坛早期下载的资源,那时候NI没有这么多限制,基本上都是正常下载的资源;后期下载的资源,都与NI的正确校验和对比过,保证是正确的资源才上传到百度网盘,所以百度网盘的资源基本上是正确的。校验和工具下载地址:
文件Hash计算器FHash,文件校验和验证下载文件正确性验证,MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算
http://pcmv.cn/thread-26524-1-1.html

LabVIEW Report Generation Toolkit for Microsoft Office1.0.1 for LabvIEW6报表工具包RGT1.0.1版适用LV6

NI LabVIEW报表工具包,适用于LabVIEW6.0或以后版本,Office97版本,仅适用Win2000/NT/ME/9x,超级老的版本。

Version 1.0.1 - November 2001
System Requirements
Your computer must meet the following minimum system requirements to run the Report Generation Toolkit:

•        LabVIEW 6.0 or later
•        Microsoft Office 97 (Word, Excel, and Graph) or later
•        Windows 2000/NT/Me/9x
•        64 MB of RAM
•        40 MB of hard drive space

NI官方已经无法下载。仅提供百度云盘下载:
链接: 请注册视觉论坛用户,登陆后购买附件下载查看 提取码: 购买附件下载
压缩文档有解压密码,请关注论坛微信公众号,回复密码获取

LabVIEW Report Generation Toolkit for Microsoft Office1.0.1报表工具包RGT适用LV6

http://pcmv.cn/thread-22636-1-1.html?fromuid=9

(出处: 视觉论坛VISIONBBS|视觉之家VISIONHOME)


LabVIEW Report Generation Toolkit for Microsoft Office
Copyright 2001, National Instruments Corporation.
All rights reserved. 
README.RTF file for LabVIEW Report Generation Toolkit for Microsoft Office
Version 1.0.1 - November 2001
System Requirements
Your computer must meet the following minimum system requirements to run the Report Generation Toolkit:
LabVIEW 6.0 or later
Microsoft Office 97 (Word, Excel, and Graph) or later
Windows 2000/NT/Me/9x
64 MB of RAM
40 MB of hard drive space
Installation Instructions
Complete the following steps to install the Report Generation Toolkit.
1. Make sure that LabVIEW is already installed on your system.
2. Insert the LabVIEW Report Generation Toolkit for Microsoft Office CD in your CD drive.
3. Follow the instructions on the screen. If Autorun is not enabled, please run setup.exe from the Setup folder on the cd.
The installer automatically detects the version of Microsoft Office installed on your system and installs the appropriate files. Once you complete the onscreen installation instructions, you can use the toolkit.
The Report Generation Toolkit installer replaces the following LabVIEW files with an updated version:
LabVIEW 6 i.libutilityNIReport.llb
LabVIEW 6menusdefault irepadv.mnu
LabVIEW 6menusdefault ireplay.mnu
LabVIEW 6menusdefault ireport.mnu
LabVIEW 6examples eportsTextReportExample.llb
LabVIEW 6examples eportswithHTML.llb
The installer backs up each file the Report Generation Toolkit replaces in order to restore the files after you uninstall the toolkit. When you uninstall the toolkit, LabVIEW returns to its original configuration.
If you reinstall or upgrade LabVIEW after you install the Report Generation Toolkit, LabVIEW overwrites the files described above and the toolkit loses its functionality. To avoid this issue, always uninstall the toolkit before you reinstall or upgrade LabVIEW. Then reinstall the Report Generation Toolkit.
Installed Files
The Report Generation Toolkit contains the following material and files:
LabVIEW Report Generation Toolkit for Microsoft Office User Manual-The manual is available both in printed form and as a PDF. The lvoffice.pdf is located in the LabVIEW 6manuals folder.
LabVIEW Report Generation Toolkit for Microsoft Office Help, available by selecting Help»Report Generation Toolkit-This help file contains detailed descriptions of all the functions in the Report Generation Toolkit.
NIReport.llb, located in the LabVIEW 6 i.libUtility folder-The Report Generation Toolkit installer replaces the NIReport library that shipped with LabVIEW6.0. The new version of the library supports Microsoft Word (hereafter known as Word) and Excel (hereafter known as Excel) reports in addition to standard and HTML formats.
Word.llb, located in the LabVIEW 6 i.libddons_office folder-This library contains the Word-specific VIs included on the Functions»Report Generation»Word Specific VIs palette.
Excel.llb, located in the LabVIEW 6 i.libddons_office folder-This library contains the Excel-specific VIs included on the Functions»Report Generation»Excel Specific VIspalette.
_wordsub.llb and _exclsub.llb, located in the LabVIEW 6 i.libddonsoffice folder-These libraries contain all Word- and Excel-specific subVIs.
Word Examples.llb, located in the LabVIEW 6examplesoffice folder-This library contains examples of how to use the Report Generation Toolkit to generate reports with Word.
Excel Examples.llb, located in the LabVIEW 6examplesoffice folder-This library contains examples of how to use the Report Generation Toolkit to generate reports with Excel.
Using the Toolkit with Custom Function Palette Sets
The LabVIEW Report Generation Toolkit is located on the Functions»Report Generation palette of the Default palette set. Complete the following steps to create a Report Generation subpalette that allows you to access the toolkit through a custom palette set.
1.   Launch LabVIEW and select New VI from the dialog box.
2.   Select Window»Show Diagram orclick on theBlock Diagram window.
3.   Select Window»Show Functions Palette.
4.   Click the Options button on the Functions palette toolbar to display the Function Browser Options dialog box.
5.   Click the Edit Palettes button. The Edit Controls and Functions Palettes dialog box appears.
6.   Select the view you want to edit from the Palette Set pull-down menu. The Functions palette changes to the view you selected.
7.   Right-click the palette and select Insert»Submenu from the shortcut menu. The Insert Submenu dialog box appears.
8.   Select Link to an Existing Menu File and click the OKbutton. Select the nireport.mnu file under LabVIEW 6menusdefault and click the Open button.
The selected palette set now contains a Report Generation subpalette that gives you access to all of the Report Generation Toolkit functions.
Distributing Stand-Alone Applications and DLLs
When you use the Report Generation Toolkit to build a stand-alone application or a DLL with the Application Builder, you must add _Word Dynamic VIs.vi from _wordsub.llb and _Excel Dynamic VIs.vi from _exclsub.llb as dynamic VIs. These two VIs contain subVIs that are called dynamically by the high-level Report Generation VIs.
Refer to the Installed Files section of this readme file for more information about the location of _wordsub.llb and _exclsub.llb.
To add _Word Dynamic VIs.vi and _Excel Dynamic VIs.vi as dynamic VIs, click on the Add Dynamic VIs… button in the Source File tab of the Application Builder, select the VIs and click on OK.
Uninstallation Information
To uninstall the LabVIEW Report Generation Toolkit for Microsoft Office, open the Add/Remove Programs dialog box from the Control Panel. Select NI LabVIEW Report Generation Toolkit for Microsoft Office and click Add/Remove.
*** End of README.RTF ***


首页
84162741QQ
联系