NI LabVIEW Vision Development Module 2018视觉开发包VDM英文版
时间:2020-08-15 17:57来源:石鑫华视觉网shixinhua.com 作者:石鑫华 点击:
99999次
NI LabVIEW Vision Development Module 2018 X86/X64 WinEng 视觉 开发包VDM英文版 适用 LabVIEW 2018 32/64版本 2018年3月发布 支持操作 系统 : Windows 10(1709版)/8.1 Update 1/7 SP1 Windows Server 2012 R2 Windows Server 2008 R2 SP1 即要求最低WIN7SP1,对
NI LabVIEW Vision Development Module 2018 X86/X64 WinEng 视觉开发包VDM英文版
适用LabVIEW 2018 32/64版本
2018年3月发布
支持操作系统:
Windows 10(1709版)/8.1 Update 1/7 SP1
Windows Server 2012 R2
Windows Server 2008 R2 SP1
即要求最低WIN7SP1,对于WIN7、WIN VISTA、WIN XP已经不再支持。
新功能:重点改进了模式匹配和几何匹配,以及增加了深度学习功能。
New Features in Vision Development Module 2018
The 2018 release of the Vision Development Module includes the following new features:
-
Support for LabVIEW 2018 (32- and 64-bit)支持LabVIEW2018的32位和64位
-
Pattern Matching (PM) Improvements:模式匹配改进
-
Improved robustness and performance for learning and matching by improving optimal pyramid level
-
Improved match reliability for images with Symmetrical Parts
-
Added Pyramid - PreProcess Learn Advanced Parameter to allow pre-processing of noisy and low contrast images for improved templates
-
Added Pyramid - Enable Target to Template Score Advanced Match Parameter to allow for improved match scores
-
Updated Pyramid - Initial Match List Length Advanced Match Parameter to automatically estimate size, leading to improved match performance for varied number of matches
-
Updated Pyramid - Max Cache in MB Advanced Match Parameter to automatically estimate cache size, leading to improved match performance for varied image sizes
-
Updated Versions: IMAQ Match Pattern 4, IMAQ Learn Pattern 6
-
Geometric Pattern Matching (GPM) Improvements几何匹配改进
-
Improved match accuracy for Large Templates (~1024x1024) and Symmetrical Parts
-
Improved match reliability and robustness for detecting Small Parts
-
GPM 16-bit support
-
Defect Map Support for GPM (IMAQ Calculate Defect Map)
-
Added parameter Enable Defect Map to use the Defect Map feature in GPM. This is found in the Advanced Geometric Match Options 2 parameter in IMAQ Advanced Setup Match Geometric Pattern 2.
-
Updated Versions: IMAQ Learn Geometric Pattern 3, IMAQ Match Geometric Pattern 2
-
Presets for Pattern Matching and Geometric Pattern Matching预置模式匹配和几何匹配
-
Pre-defined known-good sets of options for different match requirements
-
New: IMAQ Set Preset Match Options, IMAQ Set Advanced Match Options
-
Deep Learning Support:深度学习支持
-
New Model Importer APIs (under Machine Learning -> Deep Learning) to import pre-trained TensorFlow Models into LabVIEW and run inference on NI hardware targets
-
Support for TensorFlow within LabVIEW
-
Supported Development Environment: LabVIEW 64 bit
-
Supported NI HW Targets: NI Linux RT 64 bit based hardware
-
Vision FPGA视觉FPGA
-
IMAQ AutoBThreshold2 (Interclass Variance/Otsu Method) FPGA IP
-
Optimized Particle Analysis (x8) IP
-
Vision Assistant视觉助手
-
Merged Pattern Matching (PM) and Geometric Pattern Matching (GPM) Steps
-
Updated UI with new look and feel
-
Support for PM and GPM Presets
-
Support for GPM in Defect Map
-
Support for AutoBThreshold for FPGA
-
Support for Modified Sauvola for FPGA
NI官方网站下载地址:
百度云盘下载地址:
链接:
密码:
NI Vision Development Module 2018 for LabVIEW2018 X86/X64WinEng VDM2018视觉开发包适用32位/64位LV2018版下载_编程软件_机器视觉教程|软件|驱动_视觉论坛VISIONBBS_视觉之家VISIONHOME_机器视觉光源_光源控制器_工业相机_工业镜头_机器视觉方案系统_图像处理教程_石鑫华视觉网_东莞市华动智能科技有限公司
http://visionbbs.com/thread-20917-1-1.html
破解注册机:
NI通用密钥(LabVIEW破解激活工具/VBAI/VDM/VAS破解工具不限版本)_编程语言|应用软件_机器视觉教程|软件|驱动下载_机器视觉之家VISIONHOME_机器视觉论坛_视觉光源_控制器_工业相机_镜头_机器视觉方案_系统_图像处理教程_东莞市华动智能科技有限公司
http://visionhome.cn/thread-490-1-1.html
(责任编辑:石鑫华) |
------分隔线----------------------------